Henk J. Bolink

Nontemplate Synthesis of CH3NH3PbBr3 Perovskite Nanoparticles

To date, there is no example in the literature of free, nanometer-sized, organolead halide CH3NH3PbBr3 perovskites. We report here the preparation of 6 nm-sized nanoparticles of this type by a simple and fast method based on the use of an ammonium bromide with a medium-sized chain that keeps the nanoparticles dispersed in a wide range of organic solvents. These nanoparticles can be maintained stable in the solid state as well as in concentrated solutions for more than three months, without requiring a mesoporous material. This makes it possible to prepare homogeneous thin films of these nanoparticles by spin-coating on a quartz substrate. Both the colloidal solution and the thin film emit light within a narrow bandwidth of the visible spectrum and with a high quantum yield (ca. 20%); this could be advantageous in the design of optoelectronic devices.

Hybrid Organic–Inorganic Light-Emitting Diodes

The demonstration of colour tunability and high efficiency has brought organic light-emitting diodes (OLEDs) into the displays and lighting market. However, high production costs due to expensive deposition techniques and the use of reactive materials still limit their market entry, highlighting the need for novel concepts. This has driven the research towards the integration of both organic and inorganic materials into devices that benefit from their respective peculiar properties. The most representative example of this tendency is the application of metal oxides in organic optoelectronics. Metal oxides combine properties such as high transparency, good electrical conductivities, tuneable morphology, and the possibility of deposition on large areas with low-cost techniques. The use of metal oxides as charge injection interfaces in OLEDs has also been investigated. Hybrid organic-inorganic light-emitting diodes (HyLEDs) are inverted OLEDs that employ air-stable metal oxides as the charge injection contacts. They are emerging as a potential competitor to standard OLEDs, thanks to their intrinsic air stable electrodes and solution processability, which could result in low-cost, large area, light-emitting devices. This article reviews the short history of this class of devices from its first solid state example published in 2006 to the present achievements. The data presented shed light on the electronic mechanism behind the functioning of HyLEDs and give guidelines for their further optimization.

Trap-Assisted Non-Radiative Recombination in Organic-Inorganic Perovskite Solar Cells

Zernike Institute for Advanced Materials University of Groningen Nijenborgh 4, 9747 AG , Groningen , The Netherlands E-mail: wetzelaer@mpip-mainz.mpg.de M. Scheepers, A. Miquel Sempere, C. Momblona, J. Ávila, Dr. H. J. Bolink Instituto de Ciencia Molecular Universidad de Valencia C/J. Beltran 2, 46980 Paterna , Spain E-mail: henk.bolink@uv.es [+] Present address: Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz Germany

Synthesis, Characterization, and DFT/TD-DFT Calculations of Highly Phosphorescent Blue Light-Emitting Anionic Iridium Complexes

Highly phosphorescent blue-light-emitting anionic iridium complexes (C4H9)4N[Ir(2-phenylpyridine)2(CN)2] (1), (C4H9)4N[Ir(2-phenyl-4-dimethylaminopyridine)2(CN)2] (2), (C4H9)4N[Ir(2-(2,4-difluorophenyl)-pyridine)2(CN)2] (3), (C4H9)4N[Ir(2-(2,4-difluorophenyl)-4-dimethylaminopyridine)2(CN)2] (4), and (C4H9)4N[Ir(2-(3,5-difluorophenyl)-4-dimethylaminopyridine)2(CN)2] (5) were synthesized and characterized using NMR, UV-vis absorption, and emission spectroscopy and electrochemical methods. In these complexes color and quantum yield tuning aspects are demonstrated by modulating the ligands with substituting donor and acceptor groups on both the pyridine and phenyl moieties of 2-phenylpyridine. Complexes 1-5 display intense photoluminescence maxima in the blue region of the visible spectrum and exhibit very high phosphorescence quantum yields, in the range of 50-80%, with excited-state lifetimes of 1-4 micros in acetonitrile solution at 298 K. DFT and time dependent-DFT calculations were performed on the ground and excited states of the investigated complexes to provide insight into the structural, electronic, and optical properties of these systems.

Flexible high efficiency perovskite solar cells

Flexible perovskite based solar cells with power conversion efficiencies of 7% have been prepared on PET based conductive substrates. Extended bending of the devices does not deteriorate their performance demonstrating their suitability for roll to roll processing.

Advances in Perovskite Solar Cells

Organolead halide perovskite materials possess a combination of remarkable optoelectronic properties, such as steep optical absorption edge and high absorption coefficients, long charge carrier diffusion lengths and lifetimes. Taken together with the ability for low temperature preparation, also from solution, perovskite‐based devices, especially photovoltaic (PV) cells have been studied intensively, with remarkable progress in performance, over the past few years. The combination of high efficiency, low cost and additional (non‐PV) applications provides great potential for commercialization. Performance and applications of perovskite solar cells often correlate with their device structures. Many innovative device structures were developed, aiming at large‐scale fabrication, reducing fabrication cost, enhancing the power conversion efficiency and thus broadening potential future applications. This review summarizes typical structures of perovskite solar cells and comments on novel device structures. The applications of perovskite solar cells are discussed.

High efficiency single-junction semitransparent perovskite solar cells

Semitransparent perovskite solar cells with a high power conversion efficiency (PCE) above 6% and 30% full device transparency have been achieved by implementing a thin perovskite layer and a simple foil compatible layout.

Air stable hybrid organic-inorganic light emitting diodes using ZnO as the cathode

An air stable hybrid organic-inorganic light emitting device is presented. This architecture makes use of metal oxides as charge injecting materials into the light emitting polymer, avoiding the use of air sensitive cathodes commonly employed in organic light emitting diode manufacturing. We report the application of zinc oxide as a cathode in an organic light emitting device. This electroluminescent device shows high brightness levels reaching 6500cd∕m2 at voltages as low as 8V. Compared to a conventional device using low workfunction metal cathodes, our device shows a lower turn-on voltage and it can operate in air.

Near-Quantitative Internal Quantum Efficiency in a Light-Emitting Electrochemical Cell

A green-light-emitting iridium(III) complex was prepared that has a photoluminescence quantum yield in a thin-film configuration of almost unity. When used in a simple solid-state single-layer light-emitting electrochemical cell, it yielded an external quantum efficiency of nearly 15% and a power efficiency of 38 Lm/W. We argue that these high external efficiencies are only possible if near-quantitative internal electron-to-photon conversion occurs. This shows that the limiting factor for the efficiency of these devices is the photoluminescence quantum yield in a solid film configuration. The observed efficiencies show the prospect of these simple electroluminescent devices for lighting and signage applications.

A supramolecularly-caged ionic iridium (III) complex yielding bright and very stable solid-state light-emitting electrochemical cells

A new iridium(III) complex showing intramolecular interligand pi-stacking has been synthesized and used to improve the stability of single-component, solid-state light-emitting electrochemical cell (LEC) devices. The pi-stacking results in the formation of a very stable supramolecularly caged complex. LECs using this complex show extraordinary stabilities (estimated lifetime of 600 h) and luminance values (average luminance of 230 cd m-2) indicating the path toward stable ionic complexes for use in LECs reaching stabilities required for practical applications.