Henryk Szmacinski

Plasmon-controlled fluorescence: a new paradigm in fluorescence spectroscopy

Fluorescence spectroscopy is widely used in biological research. Until recently, essentially all fluorescence experiments were performed using optical energy which has radiated to the far-field. By far-field we mean at least several wavelengths from the fluorophore, but propagating far-field radiation is usually detected at larger macroscopic distances from the sample. In recent years there has been a growing interest in the interactions of fluorophores with metallic surfaces or particles. Near-field interactions are those occurring within a wavelength distance of an excited fluorophore. The spectral properties of fluorophores can be dramatically altered by near-field interactions with the electron clouds present in metals. These interactions modify the emission in ways not seen in classical fluorescence experiments. In this review we provide an intuitive description of the complex physics of plasmons and near-field interactions. Additionally, we summarize the recent work on metal-fluorophore interactions and suggest how these effects will result in new classes of experimental procedures, novel probes, bioassays and devices.

Fluorescence lifetime imaging

We describe a new fluorescence imaging methodology in which the image contrast is derived from the fluorescence lifetime at each point in a two-dimensional image and not the local concentration and/or intensity of the fluorophore. In the present apparatus, lifetime images are created from a series of images obtained with a gain-modulated image intensifier. The frequency of gain modulation is at the light-modulation frequency (or a harmonic thereof), resulting in homodyne phase-sensitive images. These stationary phase-sensitive images are collected using a slow-scan CCD camera. A series of such images, obtained with various phase shifts of the gain-modulation signal, is used to determine the phase angle and/or modulation of the emission at each pixel, which is in essence the phase or modulation lifetime image. An advantage of this method is that pixel-to-pixel scanning is not required to obtain the images, as the information from all pixels is obtained at the same time. The method has been experimentally verified by creating lifetime images of standard fluorophores with known lifetimes, ranging from 1 to 10 ns. As an example of biochemical imaging we created life-time images of Yt-base when quenched by acrylamide, as a model for a fluorophore in distinct environments that affect its decay time. Additionally, we describe a faster imaging procedure that allows images in which a specific decay time is suppressed to be calculated, allowing rapid visualization of unique features and/or regions with distinct decay times. The concepts and methodologies of fluorescence lifetime imaging (FLIM) have numerous potential applications in the biosciences. Fluorescence lifetimes are known to be sensitive to numerous chemical and physical factors such as pH, oxygen, temperature, cations, polarity, and binding to macromolecules. Hence the FLIM method allows chemical or physical imaging of macroscopic and microscopic samples.

Metal-ligand complexes as a new class of long-lived fluorophores for protein hydrodynamics.

We describe the use of asymmetric Ru-ligand complexes as a new class of luminescent probes that can be used to measure rotational motions of proteins. These complexes are known to display luminescent lifetimes ranging from 10 to 4000 ns. In this report, we show that the asymmetric complex Ru(bpy)2(dcbpy) (PF6)2 displays a high anisotropy value when excited in the long wavelength absorption band. For covalent linkage to proteins, we synthesized the N-hydroxy succinimide ester of this metal-ligand complex. To illustrate the usefulness of these probes, we describe the intensity and anisotropy decays of [Ru(bpy)2(dcbpy)] when covalently linked to human serum albumin, concanavalin A (ConA), human immunoglobulin G (IgG), and Ferritin, and measured in solutions of increased viscosity. These data demonstrate that the probes can be used to measure rotational motions on the 10 ns to 1.5 microseconds timescale, which so far has been inaccessible using luminescence methods. The present probe [Ru(bpy)2(dcbpy)] can be regarded as the first of a class of metal-ligand complexes, each with different chemical reactivity and spectral properties, for studies of macromolecular dynamics.

Fluorescence lifetime-based sensing of pH, Ca2+, K+ and glucose

Abstract Optical sensing of analytes is often accomplished using fluorescence detection. Quantitation is usually performed by measuring the fluorescence of a probe whose intensity changes in response to the analyte of interest. In the present report we describe sensing based on changes in lifetime or decay time of the probe. Such a sensing scheme is advantageous because, in contrast to intensity measurements, the decay times are mostly independent of intensity changes due to light losses, photobleaching or probe washout. Present technology allows nanosecond (ns) decay times to be measured by the phase-modulation method with inexpensive and robust instrumentation. In particular, we describe lifetime-based pH sensing using a green 543 nm He-Ne laser, sensing of Ca2+ using 514 nm excitation and a Ca2+ competitive assay for glucose using an energy-transfer mechanism. We also discuss emerging applications of phase-modulation method sensing to cellular imaging and flow cytometry.

Metal-Enhanced Fluorescence Solution-Based Sensing Platform

In recent years our laboratories have reported the favorable effects for fluorophores placed in close proximity to surface immobilized silver nanostructures. These include; greater quantum yields, reduced lifetimes (increased photostability) and directional emission. However, while these findings are likely to find multifarious applications for surface assays based on enhanced fluorescence detection, a solution based enhanced sensing platform has yet to be realized. In this short, note, we show how SiO2-coated silver colloids, indeed provide for a solution based enhanced fluorescence sensing platform with a 3–5 fold enhancement typically observed.

Fluorescence lifetime imaging of intracellular calcium in COS cells using Quin-2.

We describe the first fluorescence lifetime images of cells. To demonstrate this new capability we measured intracellular images of Ca2+ in COS cells based on the Ca(2+)-dependent fluorescence lifetime of Quin-2. Apparent fluorescence lifetimes were measured by the phase-modulation method using a gain-modulated image intensifier and a slow-scan CCD camera. We describe methods to correct the images for photobleaching during acquisition of the data, and to correct for the position-dependent response of the image intensifier. The phase angle Quin-2 images were found to yield lower than expected Ca2+ concentrations, which appears to be the result of the formation of fluorescent photoproducts by Quin-2. Fluorescence lifetime imaging (FLIM) does not require wavelength-radiometric probes and appears to provide new opportunities for chemical imaging of cells.

Fluorescence lifetime-based sensing and imaging

Abstract Time-resolved fluorescence spectroscopy is presently regarded as a research tool in biochemistry, biophysics and chemical physics. However, time-resolved methods can also be used for chemical sensing. Lifetime-based sensing has several advantages over intensity-based methods. Since the lifetime is independent of the total probe intensity, its measurement can provide quantitative sensing of many analytes without the requirement for wavelength-ratiometric probes. Analytes like oxygen and halides can be determined by the collisional quenching mechanism. To date, lifetime probes for analyte recognition (binding) have been identified for Ca 2+ , Mg 2+ , K + and pH. Importantly, the lifetime method provides a possibility to expand the sensitive analyte concentration range using probes with spectral shifts. The fluorescence lifetime method allows the sensing of analytes for which there are no direct probes, like glucose, antigens, or any affinity or immunoassays based on fluorescence energy transfer as the transduction mechanism. Advances in instrumentation, laser technology, fiber-optics and especially long-wavelength probes can result in the rapid migration of time-resolved fluorescence to clinical chemistry, environmental sensing and industrial applications. We shall describe phase-modulation instrumentation that can use simple light sources for which the light can be modulated externally by acoustooptic modulators or internally by driving current. Finally, we shall describe fluorescence lifetime imaging microscopy (FLIM), in which image contrast is created from the lifetime at each point of the image. Time-resolved imaging is now a reality in fluorescence microscopy, and promises to provide chemical imaging of a variety of intracellular analyte and/or cellular phenomena.

Fluorescence lifetime imaging of calcium using Quin-2.

We describe the use of a new imaging technology, fluorescence lifetime imaging (FLIM), for the imaging of the calcium concentrations based on the fluorescence lifetime of a calcium indicator. The fluorescence lifetime of Quin-2 is shown to be highly sensitive to [Ca2+]. We create two-dimensional lifetime images using the phase shift and modulation of the Quin-2 in response to intensity-modulated light. The two-dimensional phase and modulation values are obtained using a gain-modulated image intensifier and a slow-scan CCD camera. The lifetime values in the 2D image were verified using standard frequency-domain measurements. Importantly, the FLIM method does not require the probe to display shifts in the excitation or emission spectra, which may allow Ca2+ imaging using other Ca2+ probes not in current widespread use due to the lack of spectral shifts. Fluorescence lifetime imaging can be superior to stationary (steady-state) imaging because lifetimes are independent of the local probe concentration and/or intensity, and should thus be widely applicable to chemical imaging using fluorescence microscopy.

Enhanced fluorescence from periodic arrays of silver nanoparticles.

Electron beam lithography was used to fabricate silver nanoparticle arrays and study the effects of geometrical properties of particles on metal-enhanced fluorescence. Nanoparticle size, shape, interparticle spacing, and nominal thickness were varied in a combinatorial pattern for investigation of the particle plasmon resonance effect on enhancement of fluorescence from three different fluorophores; Fluorescein, Cy3, and Cy5. A specific geometric property for optimal enhancement from each fluorophore was determined. For interparticle spacings greater or equal to 270 nm, the enhancement matched what is expected for a single-particle model. For those particles smaller than 210 nm, the enhancement was lower than for the larger spacing in the range studied. Triangular-shaped particles gave similar enhancement to those of square-shaped particles. This combinatorial pattern by e-beam lithography was found to be useful for studying how individual parameters enhance the fluorescence that are important for rational design of enhanced fluorescence sensors.

Calcium imaging using fluorescence lifetimes and long-wavelength probes.

We describe imaging of calcium concentrations using the long-wavelength Ca2+ indicators, Calcium Green, Orange, and Crimson. The lifetimes of these probes were measured using the frequency-domain method and were found to increase from 50% to severalfold in response to calcium. The two-dimensional images of the calcium concentration were obtained using a new apparatus for fluorescence lifetime imaging (FLIM). We also describe procedures to correct for the position-dependent frequency response of the gain-modulated image intensifier used in the FLIM apparatus. Importantly, the FLIM method does not require the probe to display shifts in the excitation or emission spectra. Using the FLIM method, calcium imaging is possible using probes which display changes in lifetime in response to calcium. Consequently, calcium imaging is possible with excitation wavelengths ranging from 488 to as long as 620 nm, where autofluorescence and/or photochemical damage is minimal. These probes are also suitable for calcium measurements of single cells using lifetime-based flow cytometry.