Hetang Wang

Influence of gas flow rate and sodium carboxymethylcellulose on foam properties of fatty alcohol sodium polyoxyethylene ether sulfate solution

ABSTRACT Foamability, foam initial liquid volume, and bubble size of fatty alcohol sodium polyoxyethylene ether sulfate (AES) surfactant solution were studied with and without the addition of sodium carboxymethylcellulose (CMC) at different gas flow rates, using a sparging method. The generation time decreased with increasing gas flow rate. At low gas flow rates, the added CMC greatly enhanced the foamability by preventing bubble collapse. The initial liquid volume of the foam first increased rapidly, and then gradually decreased. Increasing the CMC concentration increased the initial liquid volume of the foam. The mean bubble diameter first clearly decreased, then increased slowly with increasing gas flow rate. CMC showed different effects on bubble size at high and low gas flow rates. Adsorption of CMC on AES molecules forms a network structure and improves bubble film stability, which can explain the above results. These findings provide guidelines for generating foam with excellent properties suitable for coal mine dust control by adjusting the gas flow rate and the concentration of the added water-soluble polymer. GRAPHICAL ABSTRACT

Oxygen consumption and chemisorption in low-temperature oxidation of sub-bituminous pulverized coal

ABSTRACT Studying the effect of oxygen in coal oxidation is very important for understanding and controlling coal spontaneous combustion. However, the oxygen effect is not very easy to determine clearly due to the large effect of heat source on coal oxidation in temperature rising experiments. Here, focused on sub-bituminous coal, the oxygen effect was separated from coal oxidation by continuously measuring FTIR spectra of coal with respect to varying temperatures and under oxygen and nitrogen. The active groups’ real-time changes of coal oxidation, thermal treatment and oxygen effect were measured. The carboxylic ester and carboxyl units are the main functional groups that increase with temperatures increasing under oxygen and nitrogen, while the other functional groups decrease in quantity. The oxygen effect promoted the consumption of aliphatic hydrocarbons and hydroxyl groups and also promoted the formation of oxygen-containing groups (except hydroxyl). Four characteristic temperature stages involved in the oxygen effect and their key functional groups were identified. Simultaneously, the relationship of oxygen consumption and chemisorption in oxygen effect was analyzed. The starting temperature of oxygen chemisorption is between 50 and 60°C. The maximum contribution of oxygen effect was observed in methyl and methylene groups. These results are important for chemical control of coal spontaneous combustion. The oxidation of aliphatic hydrocarbon should be controlled before oxygen chemisorption. The value of oxygen consumption between 70 and 80°C can be measured accurately due to the constant chemisorption rate, which help to identify the tendency for spontaneous combustion. These results will help in better understanding of the reaction mechanism of coal oxidation, especially the oxygen effect.

Influence of polymers on dust-related foam properties of sodium dodecyl benzene sulfonate with Foamscan

ABSTRACT Foamability, liquid holdup, and foam appearance are key factors that determine dust control efficiencies. As the foam production method of the FoamScan instrument is similar to foaming device used for dust control, and its measurement means can satisfy the requirements of precise measuring, the FoamScan technology is adopted to explore the influence of xanthan gum (XG) and partial hydrolytic polyacrylamide (HPAM) on dust-related foam properties of sodium dodecyl benzene sulfonate (SDBS). It was found that with the increase of the polymer mass fraction, the liquid volume in the foam gradually increased. Additionally, the foaming time t200 of the foaming agent decreased at first, then remained almost constant for both polymers, which indicated that the foamability and liquid holdup were enhanced by the addition of polymers into SDBS. In addition, the efficiencies of XG are higher than that of HPAM. The image analysis using the CSA software revealed that the mean radius formed by XG was smaller than that by HPAM and the number of bubbles was larger with XG than with HPAM. Thus, the XG foam has more area to contact with dust and could control dust better. The highly branched molecular structure and hydrogen bonds formed by XG played important roles in dust-related foam properties. GRAPHICAL ABSTRACT