Hilde Jans

Stability of mixed PEO-thiol SAMs for biosensing applications.

The secret of a successful affinity biosensor partially hides in the chemical interface layer between the transducer system and the biological receptor molecules. Over the past decade, several methodologies for the construction of such interface layers have been developed on the basis of the deposition of self-assembled monolayers (SAMs) of alkanethiols on gold. Moreover, mixed SAMs of polyethylene oxide (PEO) containing thiols have been applied for the immobilization of biological receptors. Despite the intense research in the field of thiol SAMs, relatively little is known about their biosensing properties in correlation with their long-term stability. Especially the impact of the storage conditions on their biosensing characteristics has not been reported before to our knowledge. To address these issues, we prepared mixed PEO SAMs and tested their stability and biosensing performance in several storage conditions, i.e., air, N2, ethanol, phosphate buffer, and H2O. The quality of the SAMs was monitored as a function of time using various characterization techniques such as cyclic voltammetry, contact angle, grazing angle Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. In addition, the impact of the different storage conditions on the biosensor properties was investigated using surface plasmon resonance. Via the latter technique, the receptor immobilization, the analyte recognition, and the nonspecific binding were extensively studied using the prostate specific antigen as a model system. Our experiments showed that very small structural differences in the SAM can have a great impact in their final biosensing properties. In addition it was shown that the mixed SAMs stored in air or N2 are very stable and retain their biosensor properties for at least 30 days, while ethanol appeared to be the worst storage medium due to partial oxidation of the thiol headgroup. In conclusion, care must be taken to avoid SAM degradation during storage to retain typical SAM characteristics, which is very important for their general use in many proposed applications.

Poly(acrylic acid)-stabilized colloidal gold nanoparticles: synthesis and properties

Combining the intriguing optical properties of gold nanoparticles with the inherent physical and dynamic properties of polymers can give rise to interesting hybrid nanomaterials. In this study, we report the synthesis of poly(acrylic acid) (PAA)-capped gold nanoparticles. The polyelectrolyte-wrapped gold nanoparticles were fully characterized and studied via a combination of techniques, i.e. UV-vis and infrared spectroscopy, dark field optical microscopy, SEM imaging, dynamic light scattering and zeta potential measurements. Although PAA-capped nanoparticles have been previously reported, this study revealed some interesting aspects of the colloidal stability and morphological change of the polymer coating on the nanoparticle surface in an electrolytic environment, at various pH values and at different temperatures.

Tuning the interaction between propagating and localized surface plasmons for surface enhanced Raman scattering in water for biomedical and environmental applications

With a view to biomedical and environmental applications, we investigate the plasmonic properties of a rectangular gold nanodisk array in water to boost surface enhanced Raman scattering (SERS) effects. To control the resonance wavelengths of the surface plasmon polariton and the localized surface plasmon, their dependence on the array period and diameter in water is studied in detail using a finite difference time domain method. A good agreement is obtained between calculated resonant wavelengths and those of gold nanodisk arrays fabricated using electron beam lithography. For the optimized structure, a SERS enhancement factor of 7.8 × 107 is achieved in water experimentally.

Increased stability of mercapto alkane functionalized Au nanoparticles towards DNA sensing

The use of gold nanoparticles (GNPs) in bioassays is often hampered by their colloidal stability. In this study, gold nanoparticles coated with different mercapto alkanes were investigated towards their stability. Hereto, the effects of the alkane chain length (5-11 methylene groups), the type of functional end-group (-OH or -COOH) and the amount of incorporated poly-ethylene oxide units (none, 3 or 6) on the GNP stabilization was evaluated. Based on these results, an optimal mercapto alkane (HS(CH(2))(11)PEO(6)COOH) was selected to increase the colloidal stability up to 2 M NaCl. Furthermore, it was proved that this mercapto alkane is ideally suited to enhance the stability of DNA functionalized GNPs in high electrolytic hybridization buffers. The effectiveness of these DNA functionalized GNPs was demonstrated in a sandwich assay using a surface plasmon resonance biosensor. The superior stability of these nanoparticles during hybridization may lead to enhanced biosensor technologies.

A simple double-bead sandwich assay for protein detection in serum using UV–vis spectroscopy

In this study a double-bead sandwich assay, employing magnetic nanoparticles and gold nanoparticles is proposed. The magnetic nanoparticles allow specific capturing of the analyte in biological samples, while the optical properties of the gold nanoparticles provide the signal transduction. We demonstrated that a major improvement in the assay sensitivity was obtained by selecting an optimal gold nanoparticle size (60 nm). A detection limit of 5-8 ng/mL, a sensitivity of 0.6-0.8 (pg/mL)(-1) and a dynamic range of 3 orders of magnitude were achieved without any further amplification using the detection of prostate specific antigen in serum as a model system. The proposed assay has the ability to be easily implemented within a microfluidic device for point-of-care applications whereby the readout can be executed by a fast and cheap optical measurement.

Impact of pre-concentration to covalently biofunctionalize suspended nanoparticles

The effective biofunctionalization of nanoparticles is crucial for biomedical applications. In this study we investigated the covalent biofunctionalization of magnetic nanoparticles based on carbodiimide activation. An important aspect in the covalent biofunctionalization of nanoparticles has been neglected, namely pre-concentration. Exploiting the electrostatic attraction forces between a protein and the nanoparticle surface will favor the covalent immobilization. We showed that low ionic strength buffers with a pH slightly lower than the pI of the selected biomolecules is needed to increase the yield of covalent immobilization. Additionally, it is demonstrated that the covalently immobilized proteins are bioactive, relying on a sandwich assay using gold nanoparticles as reporter labels.

Development of nanostars as a biocompatible tumor contrast agent: toward in vivo SERS imaging

The need for sensitive imaging techniques to detect tumor cells is an important issue in cancer diagnosis and therapy. Surface-enhanced Raman scattering (SERS), realized by chemisorption of compounds suitable for Raman spectroscopy onto gold nanoparticles, is a new method for detecting a tumor. As a proof of concept, we studied the use of biocompatible gold nanostars as sensitive SERS contrast agents targeting an ovarian cancer cell line (SKOV3). Due to a high intracellular uptake of gold nanostars after 6 hours of exposure, they could be detected and located with SERS. Using these nanostars for passive targeting after systemic injection in a xenograft mouse model, a detectable signal was measured in the tumor and liver in vivo. These signals were confirmed by ex vivo SERS measurements and darkfield microscopy. In this study, we established SERS nanostars as a highly sensitive contrast agent for tumor detection, which opens the potential for their use as a theranostic agent against cancer.

Robustness of surface-enhanced Raman scattering substrate with a mercaptosilane adhesive layer for in vivo sensing applications

A highly robust surface-enhanced Raman scattering (SERS) substrate for in vivo sensing applications is reported. In vivo sensing demands structurally robust substrates with good optical performance. SERS substrates containing gold nanostructures on SiO2 supports often suffer from a low adhesion strength of gold on SiO2. The proposed SERS substrate contains a mercaptosilane adhesive layer, which provides a high robustness without deteriorating the plasmon performance, in contrast to traditional titanium adhesive layers. The mercaptosilane-modified SERS substrate is sufficiently robust for in vivo sensing, as evidenced by its implantation in the animal skin for 2 months.

Compact handheld low-cost biosensor platform for remote health monitoring

In this paper, we present an original concept of plasmonic-related instrumentation platform dedicated to diagnostic biosensing tests out of the laboratory. The developed instrumental platform includes both disposable one-use microfluidic affinity biochip and compact optical readout device for biochip monitoring involving mobile Internet devices for data processing and communication. The biochip includes both microfluidic and optical coupling structures formed into a single plastic slab. The microfluidic path of the biochip operates in passive capillary pumping mode. In the proof-of-concept prototype, we address specifically the sensing format involving Surface Plasmon Resonance phenomenon. The biochip is plugged in the readout device without the use of an index matching fluid. An essential advantage of the developed biochip is that its implementation involves conventional hot embossing and thin film deposition process, perfectly suited for mass production of low-cost microfluidic biochip for biochemical applications.

Surface Chemistry to Bridge Inorganic Biosensor Surfaces and Biological Materials

The increasing miniaturization of biochips based on microelectronics and the demand for higher biosensor sensitivities and specificities put severe demands on the process and methodology of coupling biomolecules to surfaces. More specifically, controlled thin film structures have to be created which allow the bio-affinity elements to be arranged and addressed in a reproducible and controlled manner. In this chapter, we describe how to create functional oxide and gold surfaces using Self-Assembled Monolayers (SAMs) and how they can be applied to construct immunosensor interfaces. Furthermore, we report on the direct self-assembly of low-molecular weight compounds and single stranded DNA onto gold surfaces. We conclude that immobilization approaches inspired by self-assembly are extremely versatile and are of the utmost importance for the development of highly sensitive and specific biosensors.