Hiroko Tokoro

Light-induced spin-crossover magnet

The light-induced phase transition between the low-spin (LS) and high-spin (HS) states of some transition-metal ions has been extensively studied in the fields of chemistry and materials science. In a crystalline extended system, magnetically ordering the HS sites of such transition-metal ions by irradiation should lead to spontaneous magnetization. Previous examples of light-induced ordering have typically occurred by means of an intermetallic charge transfer mechanism, inducing a change of valence of the metal centres. Here, we describe the long-range magnetic ordering of the extended Fe(II)(HS) sites in a metal-organic framework caused instead by a light-induced excited spin-state trapping effect. The Fe-Nb-based material behaves as a spin-crossover magnet, in which a strong superexchange interaction (magnetic coupling through non-magnetic elements) between photo-produced Fe(II)(HS) and neighbouring Nb(IV) atoms operates through CN bridges. The magnetic phase transition is observed at 20 K with a coercive field of 240 Oe.

High proton conduction in a chiral ferromagnetic metal-organic quartz-like framework.

A complex-as-ligand strategy to get a multifunctional molecular material led to a metal-organic framework with the formula (NH(4))(4)[MnCr(2)(ox)(6)]·4H(2)O. Single-crystal X-ray diffraction revealed that the anionic bimetallic coordination network adopts a chiral three-dimensional quartz-like architecture. It hosts ammonium cations and water molecules in functionalized channels. In addition to ferromagnetic ordering below T(C) = 3.0 K related to the host network, the material exhibits a very high proton conductivity of 1.1 × 10(-3) S cm(-1) at room temperature due to the guest molecules.

High Proton Conductivity in Prussian Blue Analogues and the Interference Effect by Magnetic Ordering

We observed high proton conductivities of 1.2 x 10(-3) and 1.6 x 10(-3) S cm(-1) on Co[Cr(CN)(6)](2/3).zH(2)O and V[Cr(CN)(6)](2/3).zH(2)O, respectively, and an interference effect between magnetic ordering and ionic conduction below the magnetic phase transition temperature.

Synthesis of a metal oxide with a room-temperature photoreversible phase transition

Photoinduced phase-transition materials, such as chalcogenides, spin-crossover complexes, photochromic organic compounds and charge-transfer materials, are of interest because of their application to optical data storage. Here we report a photoreversible metal-semiconductor phase transition at room temperature with a unique phase of Ti(3)O(5), lambda-Ti(3)O(5). lambda-Ti(3)O(5) nanocrystals are made by the combination of reverse-micelle and sol-gel techniques. Thermodynamic analysis suggests that the photoinduced phase transition originates from a particular state of lambda-Ti(3)O(5) trapped at a thermodynamic local energy minimum. Light irradiation causes reversible switching between this trapped state (lambda-Ti(3)O(5)) and the other energy-minimum state (beta-Ti(3)O(5)), both of which are persistent phases. This is the first demonstration of a photorewritable phenomenon at room temperature in a metal oxide. lambda-Ti(3)O(5) satisfies the operation conditions required for a practical optical storage system (operational temperature, writing data by short wavelength light and the appropriate threshold laser power).

Multiferroics by Rational Design: Implementing Ferroelectricity in Molecule‐Based Magnets

Multiferroics (MF) are materials that exhibit simultaneouslyseveral ferroic order parameters. Among the multiferroicmaterials, those combining antiferro- or ferroelectricity (FE)and antiferro-, ferri-, or ferromagnetism (FM) within thesame material are highly desirable: the coexistence of thepolar and magnetic orders paves the way towards four-levelmemories while their interactions through the magnetoelec-tric effect makes it possible to control the magnetization byelectric fields and hence to develop electronically tuneablemagnetic devices, which are an essential feature for spin-tronics.

One-shot-laser-pulse-induced demagnetization in rubidium manganese hexacyanoferrate

We report on the photomagnetic effect in Rb0.91Mn1.05[Fe(CN)6]⋅0.6H2O ferromagnet. Magnetization of this system was reduced by irradiation with only one-shot of laser pulse (532 nm) at 3 K. This photodemagnetization was observed only when the laser power density (P) was above 9.3 mJ cm−2 pulse−1. The quantum yield was above one and reached 4.5 at P=43 mJ cm−2 pulse−1, showing that this phenomenon is driven by a cooperative effect such as the photoinduced domino effect. Infrared spectra before and after the irradiation indicated that this photomagnetic effect was caused by a photoinduced phase transition from the Fe(II)–CN–Mn(III) phase to the Fe(III)–CN–Mn(II) phase.

Electric-Field-Induced Charge-Transfer Phase Transition: A Promising Approach Toward Electrically Switchable Devices

Much research has been directed toward the development of electrically switchable optical materials for applications in memory and display devices. Here we present experimental evidence for an electric-field-induced charge-transfer phase transition in two cyanometalate complexes: Rb(0.8)Mn[Fe(CN)(6)](0.93).1.62H(2)O and Co(3)[W(CN)(8)](2)(pyrimidine)(4).6H(2)O, involving changes in their magnetic, optical, and electronic properties as well. Application of an electric field above a threshold value and within the thermal hysteresis region leads to a transition from the high- to the low-temperature phase in these compounds. A model is proposed to explain the main observations on the basis of a para-ferroelectric transition. Our observations suggest that this new concept of electrical switching, based on materials exhibiting charge-transfer phase transitions with large thermal hysteresis loops, may open up doors for novel electro-optical devices.

Hard magnetic ferrite with a gigantic coercivity and high frequency millimetre wave rotation

Magnetic ferrites such as Fe3O4 and Fe2O3 are extensively used in a range of applications because they are inexpensive and chemically stable. Here we show that rhodium-substituted ε-Fe2O3, ε-RhxFe2−xO3 nanomagnets prepared by a nanoscale chemical synthesis using mesoporous silica as a template, exhibit a huge coercive field (Hc) of 27 kOe at room temperature. Furthermore, a crystallographically oriented sample recorded an Hc value of 31 kOe, which is the largest value among metal-oxide-based magnets and is comparable to those of rare-earth magnets. In addition, ε-RhxFe2−xO3 shows high frequency millimetre wave absorption up to 209 GHz. ε-Rh0.14Fe1.86O3 exhibits a rotation of the polarization plane of the propagated millimetre wave at 220 GHz, which is one of the promising carrier frequencies (the window of air) for millimetre wave wireless communications.

Monte Carlo simulation of pressure-induced phase transitions in spin-crossover materials.

Pressure-induced phase transitions of spin-crossover materials are studied in a microscopic model taking into account the elastic interaction among distortions of lattice due to the difference of the molecular sizes between the high-spin state and the low-spin state. We perform Monte Carlo simulations in the constant pressure ensemble and reproduce several important properties of the pressure effect in a unified way with a microscopic mechanism for the first time. The simulation newly reveals how the temperature dependence of the ordering process changes with the pressure.

Realization of the mean-field universality class in spin-crossover materials

temperature, respectively. The model does not exhibit clusters, even near the critical point. We also found that cluster growth is suppressed in the present model and that there is no critical opalescence in the coexistence region. During the relaxation process from a metastable state at the end of a hysteresis loop, nucleation phenomena are not observed, and spatially uniform configurations are maintained during the change of the fraction of HS and LS. These characteristics of the mean-field model are expected to be found not only in spin-crossover materials, but also generally in systems where elastic distortion mediates the interaction among local states.