Hiroshi Ina

Effects of skeletonization on intraoperative flow and anastomosis diameter of internal thoracic arteries in coronary artery bypass grafting

BACKGROUND We examined the hypothesis that complete skeletonization of an internal thoracic artery (ITA) results in increased diameter of the graft for anastomosis and therefore improves graft flow in coronary artery bypass grafting. METHODS We studied 65 consecutive patients who underwent coronary artery bypass grafting, in which the left ITA was anastomosed to the left anterior descending artery. The first 20 consecutive ITA were harvested as a pedicle (group P) and later 45 consecutive ITAs were harvested as an ultrasonically skeletonized graft (group S). Intraoperative ITA graft mean flows were obtained with a transit-time flowmeter. Three diameters of the ITA graft were measured quantitatively in postoperative angiograms performed 14 +/- 5 days after the coronary artery bypass grafting; D1, at the origin from the subclavian artery; D2, at the level of the second intercostal space; and D3, just proximal to the anastomosis. RESULTS Intraoperative mean flow was significantly greater in group S than in group P (S: 42.6 +/- 29.1 mL/min versus P: 26.4 +/- 16.1 mL/min, p = 0.03). Although the diameters D1 and D2 were not significantly different between groups, D3 was significantly larger in group S than in group p (S: 1.77 +/- 0.28 mm versus P: 1.57 +/- 0.17 mm, p = 0.02). CONCLUSIONS Compared with pedicle harvesting, complete skeletonization of ITA may make it possible to anastomose an ITA with a larger diameter in coronary artery bypass grafting, which leads to increased graft flow by decreasing vascular resistance.

Relation of intraoperative flow measurement with postoperative quantitative angiographic assessment of coronary artery bypass grafting

BACKGROUND It is critical to evaluate the anastomotic quality of coronary artery bypass grafting (CABG) in the operating room. The aim of this study is to determine the validity of intraoperative flow measurement for predicting the quality of CABG by comparison with the postoperative quantitative angiographic evaluation of the grafts. METHODS Eighty-two grafts, including 37 internal thoracic arteries, were examined intraoperatively with a transit-time flowmeter. Coronary angiograms were performed 14 +/- 5 days after CABG to quantify the diameters at the toe, heel, and anastomosis proper of the grafts. RESULTS There were significant differences between patent and nonpatent grafts in all intraoperative flow parameters. However, the only cut-off value to distinguish patent from nonpatent was a fast Fourier transformation (FFT) ratio of 1.0. FFT is the ratio of powers of the fundamental frequency and its first harmonic. Postoperative quantitative angiography indicated that the stenosis was greatest at the heel of the anastomosis. The degree of stenosis at the heel of the anastomosis alone correlated significantly with intraoperative mean flow values. CONCLUSIONS Fast Fourier transformation analysis of flow measurement may be useful to differentiate patent grafts intraoperatively. Intraoperative flow measurement may predict the most stenotic part of the anastomosis.

A Simple Method to Determine Anastomotic Quality of Coronary Artery Bypass Grafting in the Operating Room

Anastomotic quality of coronary artery bypass grafting is directly associated with peri-operative and long-term clinical results. In this study, we investigated a cut-off value for intra-operative flow measurement. This value could be of use to a surgeon in determining the anastomotic quality of grafts. Intra-operative transit-time flow variables (mean flow, pulsatility index, % efficiency, fast Fourier transformation (FFT) of the flow curve) and the 2-week post-operative angiographic findings were examined in 66 coronary artery bypass grafts, including 33 internal thoracic arteries. There were significant differences between patent and non patent grafts in all of the intra-operative flow parameters. Only the FFT ratio, the ratio of powers of the fundamental frequency and its first harmonic, could be utilized as a cut-off value to distinguish patent from non patent grafts. All stenotic or occluded grafts showed an intra-operative FFT ratio of <1.0, while all patent grafts yielded a ratio of >1.0. Based upon these results, we concluded that power spectral analysis of flow measurement might be useful for intra-operative differential diagnosis of the anastomotic quality in coronary artery bypass grafting.

Beneficial effects of bilevel positive airway pressure after surgery under cardiopulmonary bypass

To support injured lungs, we have been applying bilevel positive airway pressure for adult patients undergoing surgery with cardiopulmonary bypass. Among 120 consecutive patients, 31 patients whose PaO2/FiO2 decreased to less than 180 after extubation assigned to the intermittent 15 min bilevel positive airway pressure (7.3+/-3.6 times per patient). Bilevel positive airway pressure improved oxygenation (PaO2/FiO2: 128+/-43 vs. 198+/-62, P=0.004) and allowed the patients with poor oxygenation after extubation to maintain PaO2/FiO2 levels similar to those of the patients without bilevel positive airway pressure. In conclusion, the bilevel positive airway pressure therapy after extubation was effective to improve lung oxygenation non-invasively in adult patients undergoing more invasive surgery with prolonged cardiopulmonary bypass.

Significance of the Initial Arterial Lactate Level and Transpulmonary Arteriovenous Lactate Difference After Open-Heart Surgery

AbstractPurpose. This study was conducted to determine the clinical significance of the initial lactate level and its transpulmonary difference after open-heart surgery in adult patients. Methods. The initial postoperative lactate levels were obtained from both radial and pulmonary arteries (La, Lv) in 65 consecutive patients undergoing coronary (n = 46), valve (n = 8), and aortic (n = 11) surgery. We analyzed the relationships between the perioperative factors and La and transpulmonary arteriovenous lactate difference (%La-v = 100(La − Lv)/Lv). Results. La and %La-v were not correlated with the preoperative factors of age, pulmonary function, or emergency surgery. La significantly correlated with the cardiopulmonary bypass time, initial arterial pH, initial PaO2/FiO2, SvO2, O2 consumption, O2 extraction rate, and the peak value of creatine phosphokinase. The %La-v significantly correlated with the aortic cross-clamp time, the lowest rectal temperature, the duration of intubation, and PaO2/FiO2 after extubation. Conclusion. La may be an indicator of the invasiveness of the surgery, while %La-v may be a predictor of postoperative pulmonary function. Both La and %La-v, as an initial value in the intensive care unit, may play an important role in planning the postoperative management of patients undergoing open-heart surgery.

Resolution of perivalvular hematoma of the Freestyle stentless aortic root bioprosthesis implanted with a subcoronary technique

The modified subcoronary technique is frequently used to implant the Freestyle aortic root bioprosthesis because of its ease. This technique is primarily associated with hematoma in the potential space between the prosthetic and native aortic walls. We report a case of resolution of perivalvular hematoma around the Freestyle valve 6 months after implantation in a patient with aneurysm of the noncoronary sinus of Valsalva. During follow-up, the patient underwent no significant changes in pressure gradient or degree of regurgitation. Although long-term results are not yet known, the subcoronary technique may be a feasible alternative for patients with aneurysms in the sinus of Valsalva to exclude it, unless the sinotubular junction and aortic annulus are intact.

Morphological changes of the pivot bearings in the Gyro Pump C1E3 after clinical use

The Gyro Pump C1E3 incorporates a doublepivot bearing system as a completely sealless centrifugal pump. The male pivot is made of alumina ceramic, and the female is made of polyethylene. Therefore, the durability of this pump depends upon morphological changes of the female polyethylene pivots, which we examined after clinical usage in the present study. We examined 30 pumps, which were used for cardiopulmonary bypass (CPB), in terms of weight, depth, and surface roughness of the female polyethylene pivots. To determine changes caused by clinical use, we also examined 10 pumps of the same lot numbers with the pumps clinically used and stocked in the factory. There were no significant changes in weight of top and bottom pivots. Also, there was no significant difference in depth and surface roughness of the top pivots. However, there was a significant increase in depth and a decrease in surface roughness of the bottom pivots from clinical use. The results revealed that the bottom pivot, rather than the top pivot, is subject to mechanical deformation by clinical use of the Gyro Pump for CPB. Since morphological changes of the bottom pivot may result from spinning of the impeller at the bottom contact phase, the magnetic coupling distance may need to be increased to obtain more stable spinning of the impeller in a routine CPB.

Morphological inspection of 80 consecutive Gyro pumps after cardiopulmonary bypass

Abstract We have been using the Gyro centrifugal pump C1E3 for cardiopulmonary bypass in anticipation of high efficiency, low hemolysis, and antithrombogenicity of this pump. However, the clinical evaluation of this pump remains to be clarified, because it has been a short time since the pump appeared in clinical situations. The aim of the present study is to inspect and analyze the Gyro pumps morphologically after clinical use. We examined 80 consecutive pumps after cardiopulmonary bypass for 186 ± 67 min with a mean flow rate of 2.52 ± 0.22 l/min/m2 at a mean rotational speed of 2485 ± 81.1 rpm. Although no abnormal findings were present in 79 pumps, one pump was found to contain effusion at the connection between the impeller body and the shaft. The extudate was supposed to be blood, based upon the results of X-ray spectrometer analysis. The cause was determined to be the upward deviation of the shaft off the impeller body. Scanning electron microscopy showed scratches on a part of the bottom housing and a smooth surface of both the male and female pivots of the pump. Surface profile measurement revealed that the deformity of the female pivots was 0.14 mm (top) and 0.05 mm (bottom). These observations suggest that the floating force and vibration by the rotating impeller acted on the joint zone between the alumina ceramic shaft and the polycarbonate impeller body, resulting in dissection of the adhesive agent from the polycarbonate. Although this abnormality may be rare, the structural design still may need to be improved.

Mitral Valve Surgery in a Patient with Spinal Progressive Muscular Atrophy : Report of a Case

We describe our experience in treating a 69-year-old man with spinal progressive muscular atrophy (SPMA), who underwent a mitral valve replacement. He was admitted for dyspnea, and surgery was indicated for severe mitral insufficiency associated with inferior myocardial infarction. He had been aware of muscle weakness and received a diagnosis of SPMA 18 years previously. Worsening muscle atrophy had led to the need for him to use a wheelchair in his daily life. A preoperative examination revealed markedly reduced pulmonary function (% volume capacity = 44.8%). Because of an acute exacerbation of heart failure, the patient underwent an urgent mitral valve replacement with a 27-mm pericardial bioprosthesis. Although it took 42 h to wean him from the mechanical ventilation and he suffered from pulmonary atelectasis after extubation, he was discharged from our hospital in a wheelchair 16 days after surgery. Respiratory management with bilevel positive airway pressure was thus found to be quite useful for patients with neuromuscular disease.