Holger Borchert

Synthesis and Shape Control of CuInS2 Nanoparticles

Cu(2)S-CuInS(2) hybrid nanostructures as well as pure CuInS(2) (CIS) nanocrystals were synthesized by methods of colloidal chemistry. The structure, the shape and the composition of these nanomaterials were investigated with transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX). By changing the reaction conditions, CuInS(2) nanorods with different aspect ratio, dimeric nanorods as well as hexagonal discs and P-shaped particles could be synthesized. Under our reaction conditions, CIS nanoparticles crystallize in the hexagonal wurtzite structure, as confirmed by Rietveld analysis of the X-ray diffraction patterns. The formation of Cu(2)S-CuInS(2) hybrid nanostructures turned out to be an essential intermediate step in the growth of CIS nanoparticles, the copper sulphide part of the hybrid material playing an important role in the shape control of the CIS nanocrystals. By a treatment of Cu(2)S-CuInS(2) with 1,10-phenanthroline, Cu(2)S parts of the hybrid nanostructures could be removed, and pure CIS nanoparticles with shapes not accessible with other methods can be obtained. Our synthetic procedure turned out to be suitable to synthesize also other compounds, like CuInS(2)-ZnS alloys, and to modify, in this way, the optical properties of the nanocrystals.

Impact of the Incorporation of Au Nanoparticles into Polymer/Fullerene Solar Cells †

The addition of small amounts of dodecylamine-capped Au nanoparticles into the active layer of organic bulk heterojunction solar cells consisting of poly(3-octylthiophene) (P3OT) and C(60) was recently suggested to have a positive impact on device performance due to improved electron transport. This issue was systematically further investigated in the present work. Different strategies to incorporate colloidally prepared Au nanoparticles with a narrow size distribution into organic solar cells with the more common donor/acceptor system consisting of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C(61)-butyric acid methyl ester (PCBM) were pursued. Au nanoparticles were prepared with either P3HT or dodecylamine as ligands. Additionally, efforts were undertaken to incorporate nearly ligand-free Au nanoparticles into the system. Therefore, a procedure was successfully developed to remove the dodecylamine ligand shell by a postpreparative ligand exchange with pyridine, a much smaller molecule that can later partly be removed from solid films by annealing. However, for all types of nanoparticles studied here, the performance of the P3HT/PCBM solar cells was found to decrease with the Au particles as an additive to the active layer, meaning that adding Au nanoparticles is not a suitable strategy in the case of the P3HT/PCBM system. Possible reasons are discussed on the basis of detailed investigations of the structure, photophysics and charge transport in the system.

Size and shape control of colloidal copper(I) sulfide nanorods.

Many physical and chemical properties of semiconducting nanocrystals strongly depend on their spatial dimensions and crystallographic structure. For these reasons, achieving a high degree of size and shape control plays an important role with respect to their application potential. In this report we present a facile route for the direct colloidal synthesis of copper(I) sulfide nanorods. A high reactivity of the starting materials is essential to obtain nanorods. We achieve this by using a thiol that thermally decomposes easily and serves as the sulfur source. The thiol is mixed in a noncoordinating solvent, which acts as the reaction medium. Adjustment of the nucleation temperature makes it possible to tailor uniform nanorods with lengths from 10 to 100 nm. The nanorods are single crystalline, and the growth direction is shown to occur along the a-axis of djurleite. The growth process and character of the nanorods were investigated through UV-vis and NIR absorption spectroscopy, transmission electron microscopy, and powder X-ray diffraction measurements.

High resolution photoemission study of CdSe and CdSe/ZnS core-shell nanocrystals

Colloidally prepared CdSe and CdSe/ZnS core-shell nanocrystals passivated with trioctylphosphine/trioctylphosphine oxide and hexadecylamine have been studied by photoelectron spectroscopy with tuneable synchrotron radiation. High-resolution spectra of the Se 3d level in CdSe nanocrystals indicate the bonding of organic ligands not only to surface Cd but also to surface Se atoms. The investigation of the CdSe/ZnS core-shell nanocrystals allows us to determine the average thickness of the ZnS shell and to study the interface between the two semiconductor nanomaterials. The photoemission spectra indicate a rather well ordered interface. No evidence for interfacial bonds other than Cd–S and Se–Zn is found.

Elementary processes and limiting factors in hybrid polymer/nanoparticle solar cells

Semiconductor nanoparticles are promising for use as electron acceptors in polymer-based bulk heterojunction solar cells. Potential advantages over fullerene derivates that are widely used in organic photovoltaics are tuneable absorption properties and the possibility to use elongated nanoparticles for more efficient electron transport. Despite these advantages, efficiencies obtained with hybrid polymer/nanoparticle solar cells are still below those of state-of-the-art polymer/fullerene solar cells. This Perspective summarises the achievements in the field of hybrid solar cells, compares the knowledge on elementary processes in hybrid and organic systems and points out the most recent trends in research. The design of the polymer nanoparticle/interface by the choice of capping ligands and development of appropriate surface treatments for the nanoparticles plays an important role, and recent progress opens new perspectives for the future improvement of hybrid solar cells.

The effect of nanocrystal surface structure on the luminescence properties: photoemission study of HF-etched InP nanocrystals.

InP nanocrystals with narrow size distribution and mean particle diameter tunable from approximately 2 up to approximately 7 nm were synthesized via the dehalosilylation reaction between InCl3 and tris(trimethylsilyl)phosphine. Specific capping of the nanocrystal surface with a shell of organic ligands protects the nanocrystals from oxidation and provides solubility of the particles in various organic solvents. InP nanocrystals with enhanced photoluminescence (PL) efficiency were obtained from the initial nanocrystals by photoassisted etching of the nanocrystal surface with HF. The resulting PL quantum efficiency of InP nanocrystals dispersed in n-butanol is about three orders of magnitude higher when compared to the nonetched InP samples and approaches approximately 40% at room temperature. High-resolution photoelectron spectroscopy with the use of synchrotron radiation was applied to reveal the changes of the nanocrystal surface responsible for the dramatic improvement of the PL efficiency. The analysis of high-resolution P 2p core-level spectra confirmed significant changes of the nanocrystal surface structure induced by the postpreparative treatments and allowed us to propose the description of the etching mechanism. In the nonetched InP nanocrystals, some surface P atoms generate energy states located inside the band gap which provide nonradiative recombination pathways. Photoassisted treatment of InP nanocrystals with HF results in selective removal of these phosphorous atoms from the nanocrystal surface. The reconstructed surface of the etched InP nanocrystals is terminated mainly with In atoms and is efficiently passivated with tri-n-octylphosphine oxide ligands.

Colloidal synthesis and structural control of PtSn bimetallic nanoparticles.

PtSn bimetallic nanoparticles with different particle sizes (1-9 nm), metal compositions (Sn content of 10-80 mol %), and organic capping agents (e.g., amine, thiol, carboxylic acid and polymer) were synthesized by colloidal chemistry methods. Transmission electron microscopy (TEM) measurements show that, depending on the particle size, the as-prepared bimetallic nanocrystals have quasi-spherical or faceted shapes. Energy-dispersive X-ray (EDX) analyses indicate that for all samples the signals of both Pt and Sn can be detected from single nanoparticles, confirming that the products are actually bimetallic but not only a physical mixture of pure Pt and Sn metal nanoparticles. X-ray diffraction (XRD) measurements were also conducted on the bimetallic particle systems. When compared with the diffraction patterns of monometallic Pt nanoparticles, the bimetallic samples show distinct shifts of the Bragg reflections to lower degrees, which gives clear proof of the alloying of Pt with Sn. However, a quantitative analysis of the lattice parameter shifts indicates that only part of the Sn atoms are incorporated into the alloy nanocrystals. This is consistent with X-ray photoelectron spectroscopy (XPS) measurements that reveal the segregation of Sn at the surfaces of the nanocrystals. Moreover, short PtSn bimetallic nanowires were synthesized by a seed-mediated growth method with amine-capped bimetallic particles as precursors. The resulting nanowires have an average width of 2.3 nm and lengths ranging from 5 to 20 nm.

Role of Oxygen Adsorption in Nanocrystalline ZnO Interfacial Layers for Polymer−Fullerene Bulk Heterojunction Solar Cells

Colloidal zinc oxide (ZnO) nanoparticles are frequently used in the field of organic photovoltaics for the realization of solution-producible, electron-selective interfacial layers. Despite the widespread use, there is still lack of detailed investigations regarding the impact of structural properties of the ZnO particles, like the particle size and shape on the device performance. In the present work, ZnO nanoparticles with varying surface-area-to-volume ratio were synthesized and implemented into indium tin oxide free polymer–fullerene bulk heterojunction solar cells featuring a gas-permeable top electrode. By comparison of the electrical characteristics before and after encapsulation from the ambient atmosphere, it was found that the internal surface area of the ZnO layer plays a crucial role under conditions where oxygen can penetrate into the solar cells. The adsorption of oxygen species at the nanoparticle surface is believed to cause band bending and electron depletion next to the surface. Both eff...

Influence of particle size in hybrid solar cells composed of CdSe nanocrystals and poly(3-hexylthiophene)

Inorganic semiconductor nanoparticles, such as CdSe quantum dots, are considered to be a promising alternative to fullerene derivates for application as electron acceptors in polymer-based bulk heterojunction solar cells. The main potential advantage is the strong light absorption of CdSe nanoparticles with a spectral bandwidth, which can even be tuned, due to the quantum size effect. However, the impact of the particle size on the performance of polymer/CdSe solar cells has remained largely unexplored so far. Therefore, the influence of particle size in hybrid solar cells using a blend of poly(3-hexylthiophene) (P3HT) and quasi-spherical CdSe nanoparticles on relevant cell parameters and the overall solar cell performance is systematically studied in the present work. As the most important result, an increase of the open-circuit voltage (VOC) can be found for smaller nanoparticles and can be explained by an “effective bandgap” model. In contrast, no significant changes of the short-circuit current densit...

Colloidally Prepared Pt Nanoparticles for Heterogeneous Gas-Phase Catalysis: Influence of Ligand Shell and Catalyst Loading on CO Oxidation Activity

In contrast to conventional methods, colloidally prepared heterogeneous supported metal catalysts are excellent systems to study the catalytic properties as a function of metal loading, monodispersity, particle shape, or the type of support without changing the other parameters, as will be demonstrated herein. Colloidal, ligand‐capped Pt nanoparticles deposited on oxide supports are investigated for CO adsorption and oxidation. Dodecylamine and different alkanethiols are used as ligands. IR spectroscopic experiments reveal that small molecules, such as CO, can pass through the ligand shell and can adsorb on the particle surface, even if the ligand shell is not removed by a special pretreatment. The ability to penetrate the shell was found to depend on the type of ligand used which renders ligand‐capped nanoparticles potentially interesting for reaction and selectivity control. In the case of CO oxidation, high activity is detected only at temperatures at which a partial loss of ligands has already occurred, resulting in a rather similar catalytic behavior independent on the type of ligand. However, there are no indications for poisoning of the catalysts by decomposition of the ligand shell. Simple purification procedures of the Pt nanoparticles are sufficient to avoid further poisoning effects. Depositing nanoparticles with the same size in different amounts on a support enabled a detailed study of the influence of metal loading on the activity. The activity per gram metal increases with the metal loading. Local autothermal heating is responsible for this effect, which is also detected for a reference system consisting of Pt nanoparticles prepared without a ligand shell.