Honest Makamba

Long-Term Affinity Modification on Poly(dimethylsiloxane) Substrate and Its Application for ELISA Analysis

Poly(dimethylsiloxane) (PDMS) possesses many advantages, such as biocompatibility and high oxygen permeability, which makes it an attractive material for fabricating biodevices. Creating an affinity surface with long-term stability and reactivity for biomolecular interactions on a PDMS substrate, however, is difficult due to its inherent hydrophobicity. In this study, an affinity surface on a PDMS substrate with long-term hydrophilicity and affinity reactivity is reported. This modification is composed of two parts. The bottom part is made of polyelectrolyte multilayers and is capable of providing long-term hydrophilic stability. The top part consists of three protein layers, bovine serum albumin (BSA), anti-BSA, and protein G, and offers an affinity surface for antibody binding and, more importantly, provides favorable orientation and minimum nonspecific binding. The chemical modification for the different stages was monitored by atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR), and contact angle and fluorescence measurements. A long-term PDMS immunodevice (LPID) based on polyelectrolyte multilayers and protein layers was fabricated and applied to the detection of transforming growth factor beta (TGF-beta) protein in mouse serum by the enzyme-linked immunosorbent assay (ELISA) method. Results show that a linear calibration curve was obtained in the concentration range from 500 to 15.125 pg/mL, and the relative standard deviation was less than 3%. Also, the amount of TGF-beta spiked in mouse serum was precisely determined. Results indicate that the modified surface was hydrophilic and reactive to biospecies up to more than 7 days in its dry form. Moreover, the blocking reagent used to reduce nonspecific binding was found to be not necessary for the LPID. Thus, the reported method is expected to hold a great potential for fabricating PDMS-based affinity devices such as protein chips.

Functionalized 3D-Hydrogel Plugs Covalently Patterned Inside Hydrophilic Poly(dimethylsiloxane) Microchannels for Flow-Through Immunoassays

Integration of a hydrogel and polydimethylsiloxane (PDMS)-based microfluidic device can greatly reduce the cost of developing channel-based devices. However, there are technical difficulties including the hydrophobic and inert surface properties associated with PDMS as well as back pressure and fragile material associated with the use of hydrogel in microchannels. In this study, a strategy to covalently photopattern 3-D hydrogel plugs with functionalized protein G inside microfluidic channels on a hydrophilic PDMS substrate coated with polyelectrolyte multilayers (PEMS) is presented. In this process, a UV-light microscope is applied to initiate the protein G-poly(acryl amide) copolymerization from the bulk substrate to solution areas via the deeply implanted photoinitiator (PI), resulting in sturdy 3D plugs covalently bonded to the upper and lower channel wall, while leaving open spaces in the channel width for the fluid to flow through. In addition, the long-term hydrophilicity and low nonspecific binding property associated with PEMS surface can be conserved for the nonpatterned area, leading to hydrogel plugs in extremely hydrophilic and permeable environment in a restricted channel space for bubble-free fluid transport and affinity interaction. By immobilization of well-oriented antibodies via protein G on the hydrogel plugs in the channel, estrogen receptor alpha (ERalpha) is demonstrated to be captured quantitatively with high loading capacity and high specificity.

Photopatterning of tough single-walled carbon nanotube composites in microfluidic channels and their application in gel-free separations

We report on the photopatterning of single carbon nanotube composites with soft hydrogel polymers in glass microchannels. Since the hydrogels by themselves are able to withstand liquid flow within the microchannels, we covalently combined them with single‐walled carbon nanotubes to impart mechanical strength. We attempted this approach by patterning the gels within the microchannels without prior surface modifications. Our results show that the 1‐cm nanocomposite hydrogels are far stronger than the free hydrogels. Moreover, the nanocomposites were able to concentrate and separate proteins within a 1.5‐cm distance using gel‐free buffers. The separation cannot only be tuned by changing the running buffer; the lack of gels in the running buffer reduces the chance of channel blockage and thus the lifetime of the device is prolonged. The usefulness of the patterned nanocomposites may be extended by a wide selection of nanocomposite properties and monomers to find a broad range of applications in lab‐on‐chip technology.