Hong-Ping Zhao

Ultrasonic technique for extracting nanofibers from nature materials

This letter reports a simple and versatile approach for extracting bionanofibers from natural materials using the ultrasonic technique. Bionanofibers have been fabricated from various materials, e.g., spider and silkworm silks, chitin fibers, collagen, cotton, bamboo, and ramee and hemp fibers. The obtained nanofibers have uniform diameters in the range of 25–120nm and possess the optimized hierarchical structures and superior properties of natural materials which have formed after the evolution of many millions of years. This methodology might be valuable to provide a convenient, versatile, and environmentally benign fabrication method for producing bionanofibers at an industrial scale.

Elasticity-driven droplet movement on a microbeam with gradient stiffness : A biomimetic self-propelling mechanism

Directional movement of liquid droplets is of significance not only for certain physiological processes in nature but also for design of some microfluidic devices. In this study, we report a novel way to drive directional movement of liquid droplets on a microbeam with a varying or gradient stiffness. We use the energy method to theoretically analyze the interaction between a droplet and the elastic microbeam. The system tends to have the minimum potential energy when the droplet moves to the softer end of the beam. Therefore, a gradient change of the bending stiffness may be utilized to help the directional motion of droplets. Similarly, one can also drive droplets to move in a designed direction by varying the cross sectional geometry of the beam. Finally, some possible applications of this self-propelling mechanism are suggested.

Hierarchical capillary adhesion of microcantilevers or hairs

As a result of capillary forces, animal hairs, carbon nanotubes or nanowires of a periodically or randomly distributed array often assemble into hierarchical structures. In this paper, the energy method is adopted to analyse the capillary adhesion of microsized hairs, which are modelled as clamped microcantilevers wetted by liquids. The critical conditions for capillary adhesion of two hairs, three hairs or two bundles of hairs are derived in terms of Youngs contact angle, elastic modulus and geometric sizes of the beams. Then, the hierarchical capillary adhesion of hairs is addressed. It is found that for multiple hairs or microcantilevers, the system tends to take a hierarchical structure as a result of the minimization of the total potential energy of the system. The level number of structural hierarchy increases with the increase in the number of hairs if they are sufficiently long. Additionally, we performed experiments to verify our theoretical solutions for the adhesion of microbeams.

On flaw tolerance of nacre: a theoretical study

As a natural composite, nacre has an elegant staggered ‘brick-and-mortar’ microstructure consisting of mineral platelets glued by organic macromolecules, which endows the material with superior mechanical properties to achieve its biological functions. In this paper, a microstructure-based crack-bridging model is employed to investigate how the strength of nacre is affected by pre-existing structural defects. Our analysis demonstrates that owing to its special microstructure and the toughening effect of platelets, nacre has a superior flaw-tolerance feature. The maximal crack size that does not evidently reduce the tensile strength of nacre is up to tens of micrometres, about three orders higher than that of pure aragonite. Through dimensional analysis, a non-dimensional parameter is proposed to quantify the flaw-tolerance ability of nacreous materials in a wide range of structural parameters. This study provides us some inspirations for optimal design of advanced biomimetic composites.

Structures, properties, and functions of the stings of honey bees and paper wasps: a comparative study

ABSTRACT Through natural selection, many animal organs with similar functions have evolved different macroscopic morphologies and microscopic structures. Here, we comparatively investigate the structures, properties and functions of honey bee stings and paper wasp stings. Their elegant structures were systematically observed. To examine their behaviors of penetrating into different materials, we performed penetration–extraction tests and slow motion analyses of their insertion process. In comparison, the barbed stings of honey bees are relatively difficult to be withdrawn from fibrous tissues (e.g. skin), while the removal of paper wasp stings is easier due to their different structures and insertion skills. The similarities and differences of the two kinds of stings are summarized on the basis of the experiments and observations.

Biomechanical tactics of chiral growth in emergent aquatic macrophytes.

Through natural selection, many plant organs have evolved optimal morphologies at different length scales. However, the biomechanical strategies for different plant species to optimize their organ structures remain unclear. Here, we investigate several species of aquatic macrophytes living in the same natural environment but adopting distinctly different twisting chiral morphologies. To reveal the principle of chiral growth in these plants, we performed systematic observations and measurements of morphologies, multiscale structures, and mechanical properties of their slender emergent stalks or leaves. Theoretical modeling of pre-twisted beams in bending and buckling indicates that the different growth tactics of the plants can be strongly correlated with their biomechanical functions. It is shown that the twisting chirality of aquatic macrophytes can significantly improve their survivability against failure under both internal and external loads. The theoretical predictions for different chiral configurations are in excellent agreement with experimental measurements.

IMPROVEMENT OF THE PEELING STRENGTH OF THIN FILMS BY A BIOINSPIRED HIERARCHICAL INTERFACE

The peeling behavior of a thin film bonded to a substrate is investigated by using the cohesive interface model. We compare the peeling processes of film/substrate interfaces with three different geometric shapes, including a flat interface, a curved interface of sinusoidal shape, and a wavy interface with two-level sinusoidal hierarchy. The effect of the peeling angle on the maximal peeling strength is also examined. It is demonstrated that the peeling strength can be significantly improved by introducing a hierarchical wavy morphology at the film/substrate interface. This study may be helpful for the design of film/substrate systems with enhanced mechanical properties.

Synergistic Effects of Chiral Morphology and Reconfiguration in Cattail Leaves

Cattail, a type of herbaceous emergent aquatic macrophyte, has upright-standing leaves with a large slenderness ratio and a chiral morphology. With the aim of understanding the effect of chiral morphology on their mechanical behavior, we investigated, both experimentally and theoretically, the twisting chiral morphologies and wind-adaptive reconfigurations of cattail leaves. Their multiscale structures were observed by using optical microscope and scanning electron microscopy. Their mechanical properties were measured by uniaxial tension and three-point bending tests. By modeling a chiral leaf as a pre-twisted cantilever-free beam, fluid dynamics simulations were performed to elucidate the synergistic effects of the leaf’s chiral morphology and reconfiguration in wind. It was observed that the leaves have evolved multiscale structures and superior mechanical properties, both of which feature functionally gradient variations in the height direction, to improve their ability to resist lodging failure by reducing the maximal stress. The synergistic effect of chiral morphology and reconfiguration can greatly improve the survivability of cattail plants in wind.

Optimal characteristic nanosizes of mineral bridges in mollusk nacre

To date, it is still unclear why all mineral bridges linking neighboring platelets in various types of mollusk nacre have sizes of 10–50 nanometers. We answer this question by investigating the strength of platelet–platelet interfaces and found that only when the mineral bridges have diameters of a few tens of nanometers can the interfaces achieve an optimal strength. It is the uniformity of stress distributions in the mineral bridges that dictates their characteristic sizes. The mechanism underlying interfacial optimization via mineral nanobridges simultaneously optimizes the load-bearing efficiency of the materials. This study provides inspirations for the biomimetic design of advanced composite materials.

Synergistic adhesion mechanisms of spider capture silk

It is well known that capture silk, the main sticky component of the orb web of a spider, plays an important role in the spiders ability to capture prey via adhesion. However, the detailed mechanism with which the spider achieves its unparalleled high-adhesion performance remains elusive. In this work, we combine experiments and theoretical analysis to investigate the adhesion mechanisms of spider silk. In addition to the widely recognized adhesion effect of the sticky glue, we reveal a synergistic enhancement mechanism due to the elasticity of silk fibres. A balance between silk stiffness, strength and glue stickiness is crucial to endow the silk with superior adhesion, as well as outstanding energy absorption capacity and structural robustness. The revealed mechanisms deepen our understanding of the working principles of spider silk and suggest guidelines for biomimetic designs of spider-inspired adhesion and capture devices.