Hong-zhen Lian

Bioaccessibility and health risk of arsenic, mercury and other metals in urban street dusts from a mega-city, Nanjing, China

The oral bioaccessibility and the human health risks of As, Hg and other metals (Cu, Pb, Zn, Ni, Co, Cd, Cr, Mn, V and Fe) in urban street dusts from different land use districts in Nanjing (a mega-city), China were investigated. Both the total contents and the oral bioaccessibility estimated by the Simple Bioaccessibility Extraction Test (SBET) of the studied elements varied with street dusts from different land use districts. Cd, Zn, Mn, Pb, Hg and As showed high bioaccessibility. SBET-extractable contents of elements were significantly correlated with their total contents and the dust properties (pH, organic matter contents). The carcinogenic risk probability for As and Cr to children and adults were under the acceptable level (<1×10(-4)). Hazard Quotient values for single elements and Hazard Index values for all studied elements suggested potential non-carcinogenic health risk to children, but not to adults.

Room-temperature phosphorescence chemosensor and Rayleigh scattering chemodosimeter dual-recognition probe for 2,4,6-trinitrotoluene based on manganese-doped ZnS quantum dots.

Rayleigh scattering (RS) as an interference factor to detection sensitivity in ordinary fluorescence spectrometry is always avoided in spite of considerable efforts toward the development of RS-based resonance Rayleigh scattering (RRS) and hyper-Rayleigh scattering (HRS) techniques. Here, combining advantages of quantum dots (QDs) including chemical modification of functional groups and the installation of recognition receptors at their surfaces with those of phosphorescence such as the avoidance of autofluorescence and scattering light, l-cys-capped Mn-doped ZnS QDs have been synthesized and used for room-temperature phosphorescence (RTP) to sense and for RS chemodosimetry to image ultratrace 2,4,6-trinitrotoluene (TNT) in water. The l-cys-capped Mn-doped ZnS QDs interdots aggregate with TNT species induced by the formation of Meisenheimer complexes (MHCs) through acid-base pairing interaction between l-cys and TNT, hydrogen bonding, and electrostatic interaction between l-cys intermolecules. Although the resultant MHCs may quench the fluorescence at 430 nm, interdots aggregation can greatly influence the light scattering property of the aqueous QDs system, and therefore, dominant RS enhancement at defect-related emission wavelength was observed under the excitation of violet light of Mn-doped ZnS QDs, which was applied in chemodosimetry to image TNT in water. Meanwhile, Mn-doped ZnS QDs also exhibited a highly selective response to the quenching of the (4)T(1)-(6)A(1) transition emission (RTP) and showed a very good linearity in the range of 0.0025-0.45 μM TNT with detection limit down to 0.8 nM and RSD of 2.3% (n = 5). The proposed methods are well-suited for detecting the ultratrace TNT and distinguishing different nitro compounds.

Direct determination of trace aluminum with quercetin by reversed-phase high performance liquid chromatography.

The determination of trace levels of aluminum by high performance liquid chromatography (HPLC) with spectrophotometric detection using quercetin, a bioactive substance as a pre-column reagent, is developed in this paper. The Al-quercetin chelate was separated on a reversed-phase ODS column with a mobile phase consisting of 70% water (pH 1.0 with perchloric acid) and 30% methanol, and detected at its maximum of 415nm. The response was linear over the 1.0x10(-7) to 8.0x10(-5)M concentration range with a detection limit of 5.0x10(-8)M and a relative standard deviation of 1.0% at the 5x10(-6)M level. The analysis was free from common ions except iron, which could be successfully screened by 1,10-phenanthroline. This method has been employed to the determination of Al in environmental and biological samples. Moreover, direct speciation of labile monomeric Al, the toxic form of Al, in natural water by the present technique was explored. The coordination ratio of Al complex with quercetin was also elucidated by HPLC combined with molar ratio method. Only a 1:1 complex was formed. Because quercetin exists in body, a preliminary thinking of in vivo determination of Al is provided in this study.

Zincon-immobilized silica-coated magnetic Fe3O4 nanoparticles for solid-phase extraction and determination of trace lead in natural and drinking waters by graphite furnace atomic absorption spectrometry.

A new protocol using zincon-immobilized silica-coated magnetic Fe(3)O(4) nanoparticles (Zincon-Si-MNPs) as solid-phase extraction (SPE) medium has been developed for the separation and preconcentration of trace lead in water. Various parameters such as pH, extraction time, concentration and volume of eluent, sample volume, and influence of co-existing ions have been investigated in order to establish the optimum conditions for the determination of lead in combination with graphite furnace atomic absorption spectrometry (GFAAS). The detection limit (LOD) of the proposed method for lead based on an enrichment factor of 200 was 10 ng L(-1). The relative standard deviations (RSDs, n=5) were 8.3%, 7.8% and 9.2%, respectively, at 5, 0.5 and 0.05 ng mL(-1) levels. This method has been successfully applied to the analysis of trace lead in natural and drinking water samples and the recoveries for the spiked samples were in the range of 84-104%.

Magnetic solid-phase extraction combined with graphite furnace atomic absorption spectrometry for speciation of Cr(III) and Cr(VI) in environmental waters

A new approach of magnetic solid phase extraction (MSPE) coupled with graphite furnace atomic absorption spectrometry (GFAAS) has been developed for the speciation of Cr(III) and Cr(VI) using zincon-immobilized silica-coated magnetic Fe3O4 nanoparticles (Zincon-Si-MNPs) as the MSPE absorbent. Cr(III) was quantitatively reserved on the absorbent at pH 9.1 while total Cr was reserved at pH 6.5. The absorbed Cr species were eluted by using 2 mol/L HCl and detected by GFAAS. The concentration of Cr(VI) could be calculated by subtracting Cr(III) from total Cr. All the parameters affecting the separation and extraction efficiency of Cr species such as pH, extraction time, concentration and volume of eluent, sample volume and influence of co-existing ions were systematically examined and the optimized conditions were established accordingly. The detection limit (LOD) of the method was 0.016 and 0.011 ng mL(-1) for Cr(III) and Cr(VI), respectively, with the enrichment factor of 100 and 150. The precisions of this method (Relative standard deviation, RSD, n=7) for Cr(III) and Cr(VI) at 0.1 ng mL(-1) were 6.0% and 6.2%, respectively. In order to validate the proposed method, a certified reference material of environmental water was analyzed, and the result of Cr speciation was in good agreement with the certified value. This MSPE-GFAAS method has been successfully applied for the speciation of Cr(III) and Cr(VI) in lake and tap waters with the recoveries of 88-109% for the spiked samples. Moreover, the MSPE separation mechanism of Cr(III) and Cr(VI) based on their adsorption-desorption on Zincon-Si-MNPs has been explained through various spectroscopic characterization.

Simultaneous determination of oxalic, fumaric, maleic and succinic acids in tartaric and malic acids for pharmaceutical use by ion-suppression reversed-phase high performance liquid chromatography.

A reliable method for the simultaneous determination of oxalic, fumaric, maleic, and succinic acids in tartaric and malic acids for pharmaceutical use by reversed-phase ion-suppression high performance liquid chromatography is presented. HPLC was achieved on a Nova-Pak C18 column by isocratic elution using water adjusted to pH 2.10-2.15 with perchloric acid, and detection was by UV adsorption at a wavelength of 210 nm. This method was found to be superior to previous liquid chromatography as well as other classical assay, and to be an attractive choice for the analysis of these compounds.

Determination of 17 pyrethroid residues in troublesome matrices by gas chromatography/mass spectrometry with negative chemical ionization

An analytical method with the technique of QuEChERS (quick, easy, cheap, effective, rugged and safe) and gas chromatography (GC)/mass spectrometry (MS) in negative chemical ionization (NCI) has been developed for the determination of 17 pyrethroid pesticide residues in troublesome matrices, including garlic, onion, spring onion and chili. Pyrethroid residues were extracted with acidified acetonitrile saturated by hexane. After a modified QuEChERS clean-up step, the extract was analyzed by GC-NCI/MS in selected ion monitoring (SIM) mode. An isotope internal standard of trans-cypermethrin-D(6) was employed for quantitation. Chromatograms of pyrethroids obtained in all these matrices were relatively clean and without obvious interference. The limits of detection (LODs) ranged from 0.02 to 6 μg kg(-1) and recovery yields were from 54.0% to 129.8% at three spiked levels (20, 40 and 60 μg kg(-1) for chili, and 10, 20 and 30 μg kg(-1) for others) in four different matrices depending on the compounds determined. The relative standard deviations (RSDs) were all below 14%. Isomerization enhancement of pyrethroids in chili extract was observed and preliminarily explained, especially for acrinathrin and deltamethrin.

Synthesis in aqueous solution and characterisation of a new cobalt-doped ZnS quantum dot as a hybrid ratiometric chemosensor

In this paper, cobalt (Co(2+))-doped (CoD) ZnS quantum dots (QDs) are synthesised in aqueous solution and characterised for the first time. L-Cysteine (L-Cys) ligands on the surface of CoD ZnS QDs can bind 2,4,6-trinitrotoluene (TNT) to form Meisenheimer complexes (MHCs) mainly through acid-base pairing interactions between TNT and L-Cys and the assistance of hydrogen bonding and electrostatic co-interactions among L-Cys intermolecules. The aggregation of inter-dots induced by MHCs greatly influenced the light scattering property of the QDs in aqueous solution, and Rayleigh scattering (RS) enhancement at the defect-related emission wavelengths as well as its left side was observed with the excitation of CoD ZnS QDs by violet light. RS enhancement, combining with the quenching of the orange transition emission induced by TNT anions, resulted in a change in the ratiometric visualisation of the system being investigated. A novel CoD ZnS QD-based hybrid ratiometric chemosensor has therefore been developed for simple and sensitive analysis of TNT in water. This ratiometric probe can assay down to 25 nM TNT in solution without interference from a matrix of real water sample and other nitroaromatic compounds. Because of the excellent electron-accepting ability and strong affinity of TNT to L-Cys on the surface of CoD ZnS QDs, the CoD photoluminescent nanomaterials reported here are well suited for detecting ultra-trace TNT and for distinguishing different nitro-compounds in aqueous solution.

Determination of aluminum in environmental and biological samples by reversed-phase high-performance liquid chromatography via pre-column complexation with morin

Morin was used as a pre-column reagent for the determination of aluminum by RP-HPLC with fluorescence detection. This method has been successfully applied to direct determination of trace Al in environmental and biological samples. The response was linear from 6 x 10(-9) to 6 x 10(-5) M with a detection limit of 2 x 10(-9) M. In addition, the different Al complexes with morin were separated by the proposed HPLC procedure and their coordination ratios were depicted by molar-ratio method. The results showed that 1:1 and 2:1 Al-morin complexes formed.

Solid phase extraction of magnetic carbon doped Fe3O4 nanoparticles.

Carbon decorated Fe3O4 nanoparticles (Fe3O4/C) are promising magnetic solid-phase extraction (MSPE) sorbents in environmental and biological analysis. Fe3O4/C based MSPE method shows advantages of easy operation, rapidness, high sensitivity, and environmental friendliness. In this paper, the MSPE mechanism of Fe3O4/C nanoparticles has been comprehensively investigated, for the first time, through the following three efforts: (1) the comparison of extraction efficiency for polycyclic aromatic hydrocarbons (PAHs) between the Fe3O4/C sorbents and activated carbon; (2) the chromatographic retention behaviors of hydrophobic and hydrophilic compounds on Fe3O4/C nanoparticles as stationary phase; (3) related MSPE experiments for several typical compounds such as pyrene, naphthalene, benzene, phenol, resorcinol, anisole and thioanisole. It can be concluded that there are hybrid hydrophobic interaction and hydrogen bonding interaction or dipole-dipole attraction between Fe3O4/C sorbents and analytes. It is the existence of carbon and oxygen-containing functional groups coated on the surface of Fe3O4/C nanoparticles that is responsible for the effective extraction process.