Honghua Jia

Effect of acclimatization on hexavalent chromium reduction in a biocathode microbial fuel cell.

A simple acclimatization method for the reduction of hexavalent chromium (Cr(VI)) at a biocathode by first enriching an exoelectrogenic biofilm on a microbial fuel cell (MFC) anode, followed by direct inversion of the anode to function as the biocathode, has been established. This novel method significantly enhanced the Cr(VI) reduction efficiency of the MFC, which was mainly attributed to the higher microbial density and less resistive Cr(III) precipitates on the cathode when compared with a common biocathode acclimatization method (control). The biocathode acclimatization period was shortened by 19days and the Cr(VI) reduction rate was increased by a factor of 2.9. Microbial community analyses of biocathodes acclimatized using different methods further verified the feasibility of this electrode inversion method, indicating similar dominant bacteria species in biofilms, which mainly consist of Gamma-proteobacteria and Bacteria.

Biogas production and microbial community shift through neutral pH control during the anaerobic digestion of pig manure.

Laboratory-scale reactors, in which the pH could be auto-adjusted, were employed to investigate the mesophilic methane fermentation with pig manure (7.8% total solids) at pH 6.0, 7.0, and 8.0. Results showed that the performance of anaerobic digestion was strongly dependent on pH value. Biogas production and methane content at neutral pH 7.0 were significantly higher (16,607mL, 51.81%) than those at pH 6.0 (6916mL, 42.9%) and 8.0 (9739mL, 35.6%). Denaturing gradient gel electrophoresis fingerprinting and Shannons index indicated that the samples contained highly diverse microbial communities. The major genus at pH 7.0 was Methanocorpusculum, compared with that was Methanosarcina at both pH 6.0 and 8.0. Our research revealed that cultures maintained at pH 7.0 could support increased biogas production, which has significant implications for the scale-up biogas engineering.

Effect of NaX zeolite-modified graphite felts on hexavalent chromium removal in biocathode microbial fuel cells

Two kinds of NaX zeolite-modified graphite felts were used as biocathode electrodes in hexavalent chromium (Cr(VI))-reducing microbial fuel cells (MFCs). The one was fabricated through direct modification, and the other one processed by HNO3 pretreatment of graphite felt before modification. The results showed that two NaX zeolite-modified graphite felts are excellent bio-electrode materials for MFCs, and that a large NaX loading mass, obtained by HNO3 pretreatment (the HNO3-NaX electrode), leads to a superior performance. The HNO3-NaX electrode significantly improved the electricity generation and Cr(VI) removal of the MFC. The maximum Cr(VI) removal rate increased to 10.39±0.28 mg/L h, which was 8.2 times higher than that of the unmodified control. The improvement was ascribed to the strong affinity that NaX zeolite particles, present in large number on the graphite felt, have for microorganisms and Cr(VI) ions.

Bio-Electron-Fenton (BEF) process driven by microbial fuel cells for triphenyltin chloride (TPTC) degradation

The intensive use of triphenyltin chloride (TPTC) has caused serious environmental pollution. In this study, an effective method for TPTC degradation was proposed based on the Bio-Electron-Fenton process in microbial fuel cells (MFCs). The maximum voltage of the MFC with graphite felt as electrode was 278.47% higher than that of carbon cloth. The electricity generated by MFC can be used for in situ generation of H2O2 to a maximum of 135.96μmolL-1 at the Fe@Fe2O3(*)/graphite felt composite cathode, which further reacted with leached Fe2+ to produce hydroxyl radicals. While 100μmolL-1 TPTC was added to the cathodic chamber, the degradation efficiency of TPTC reached 78.32±2.07%, with a rate of 0.775±0.021μmolL-1h-1. This Bio-Electron-Fenton driving TPTC degradation might involve in SnC bonds breaking and the main process is probably a stepwise dephenylation until the formation of inorganic tin and CO2. This study provides an energy saving and efficient approach for TPTC degradation.

Effect of steam explosion pretreatment on the anaerobic digestion of rice straw

Rice straw pretreated under various conditions of temperature, ranging from 200 to 220 °C, and time, from 60 to 240 s, was used as the substrate in an anaerobic biogas recovery process. Steam explosion-pretreated rice straw displayed a significant improvement in physicochemical properties compared to untreated rice straw. The biogas production rate increased in all pretreated rice straw systems with shortened start-up periods, and the highest biogas production rate reached 328.7 mL g−1 TS (total solid content) under steam explosion pretreatment conditions of 200 °C/120 s, corresponding to a 51% increase. In addition, upon pretreatment at 200 °C/120 s, the degradation rates of cellulose and hemicellulose in the system reached 53.46% and 49.54%, which were 13.72% and 16.79% higher than in the control, respectively. PCR-DGGE analysis showed that the distributions of specific species of bacteria and archaea varied among different samples. There were clear differences in the bacterial population between pretreated and untreated groups during the set-up period and early stage. During the mid and final stages, pretreated systems had more diverse communities in the digester than the untreated system. Steam explosion pretreatment of the rice straw also led to the earlier presence of cellulolytic bacteria. Furthermore, the species of cellulolytic bacteria in pretreated systems were Clostridium sp. while those in the untreated reactor were Pseudomonas sp. The succession of archaea in the microbial community at different stages in the pretreated and untreated systems was not as obvious as that of bacteria. The results indicate that the physicochemical properties of rice straw were altered by the steam explosion pretreatment, which led to more efficient biogas production due to changes in the bacterial and archaeal species in the pretreated system.

An integrated aerobic-anaerobic strategy for performance enhancement of Pseudomonas aeruginosa-inoculated microbial fuel cell

Microbial fuel cell (MFC) is a promising device for energy generation and organic waste treatment simultaneously by electrochemically active bacteria (EAB). In this study, an integrated aerobic-anaerobic strategy was developed to improve the performance of P. aeruginosa-inoculated MFC. With an aerobic start-up and following an anaerobic discharge process, the current density of MFC reached a maximum of 99.80µA/cm2, which was 91.6% higher than the MFC with conventional constant-anaerobic operation. Cyclic voltammetry and HPLC analysis showed that aerobic start-up significantly increased electron shuttle (pyocyanin) production (76% higher than the constant-anaerobic MFC). Additionally, enhanced anode biofilm formation was also observed in the integrated aerobic-anaerobic MFC. The increased pyocyanin production and biofilm formation promoted extracellular electron transfer from EAB to the anode and were the underlying mechanism for the MFC performance enhancement. This work demonstrated the integrated aerobic-anaerobic strategy would be a practical strategy to enhance the electricity generation of MFC.

Different organic loading rates on the biogas production during the anaerobic digestion of rice straw: A pilot study

The aim of this work was to investigate the mesophilic methane fermentation of rice straw at different organic loading rates (OLRs) in a 300m3 bioreactor. It was found that biogas production increased when the OLR was below 2.00kg VSsubstrate/(m3·d). The average volumetric biogas production reached 0.86m3/(m3·d) at an OLR of 2.00kg VSsubstrate/(m3·d). Biogas production rate was 323m3/t dry rice straw over the whole process. The pH, chemical oxygen demand, volatile fatty acid, and NH4+-N concentrations were all in optimal range at different OLRs. High-throughput sequencing analysis indicated that Firmicutes, Fibrobacteres, and Spirochaetes predominated in straw samples. Chloroflexi, Proteobacteria, and Planctomycetes were more abundant in the slurry. The hydrogenotrophic pathway was the main biochemical pathway of methanogenesis in the reactor. This study provides new information regarding the OLR and the differences in the spatial distribution of specific microbiota in a rice straw biogas plant.

Effects of different biofilm carriers on biogas production during anaerobic digestion of corn straw

This study investigated the performance of anaerobic digestion systems using four types of fibrous biofilm carriers, a polypropylene, a polyester, a polyamide, and a polyurethane fiber material. The biogas and methane production, pH, chemical oxygen demand, total solids content, volatile solids content, residual coenzyme F420, and microbial community compositions were determined during the experimental runs. Furthermore, scanning electron microscopy was employed to identify the microbial consortium and examine their attachment onto the surface of the four fibrous biofilm carriers. The polypropylene fiber system maintained the highest biogas and methane production in the reactor, which was 44.80% and 49.84% higher than that noted in the control, respectively, during the entire anaerobic fermentation cycle. Meanwhile, the polypropylene fiber system exhibited the highest TS, VS, and COD removal efficiency. The results of high-throughput sequencing indicated that the dominant species in the polypropylene fiber system were Methanoregula and Methanobacterium.

Ultrasonic and thermal pretreatments on anaerobic digestion of petrochemical sludge: Dewaterability and degradation of PAHs

Effects of different pretreatment methods on sludge dewaterability and polycyclic aromatic hydrocarbons (PAHs) degradation during petrochemical sludge anaerobic digestion were studied. Results showed that the total biogas production volume in the thermal pretreatment system was 4 and 5 times higher than that in the ultrasound pretreatment and in the control system, and the corresponding volatile solid removal efficiencies reached 28%, 15%, and 8%. Phenanthrene, paranaphthalene, fluoranthene, benzofluoranthene, and benzopyrene removal rates reached 43.3%, 55.5%, 30.6%, 42.9%, and 41.7%, respectively, in the thermal pretreatment system, which were much higher than those in the ultrasound pretreatment and in the control system. Moreover, capillary suction time (CST) of sludge increased after pretreatment, and then reduced after 20 days of anaerobic digestion, indicating that sludge dewaterability was greatly improved after anaerobic digestion. The decrease of protein and polysaccharide in the sludge could improve sludge dewaterability during petrochemical sludge anaerobic digestion. This study suggested that thermal pretreatment might be a promising enhancement method for petrochemical sludge solubilization, thus contributing to degradation of the PAHs, biogas production, and improvement of dewaterability during petrochemical sludge anaerobic digestion.

Effects of different carriers on biogas production and microbial community structure during anaerobic digestion of cassava ethanol wastewater

ABSTRACT In this study, an anaerobic bioreactor (AB) with no added fillers (ABWF), a packed-bed bioreactor with a porous ceramic filler (ABCF), and another packed-bed bioreactor filled with graphite felt (ABGF) were established for anaerobic digestion of cassava ethanol wastewater. The results showed that ABCF exhibited excellent wastewater treatment performance in a stable process that was superior to ABWF and ABGF, with the following characteristics: a high chemical oxygen demand removal efficiency of 98.06% and maximum biogas production of 3200 mL/d at a total reactor volume of 3.46 L. Illumina MiSeq sequencing analysis revealed that differences existed among the microbial communities of the three ABs that were in accordance with the operational characteristics. The ABCF system displayed maximum bacterial diversity, whereas the ABWF system exhibited moderate richness and the ABGF system possessed the lowest species richness. The ABCF system was more stable than the ABWF and ABGF systems during anaerobic digestion of cassava ethanol wastewater. Different functional microbial communities that are responsible for the degradation of certain compounds were also identified in the ABCF and ABGF systems. Our results demonstrate that ceramic materials should be considered an appropriate support for the immobilization of cells.