Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Hongliu Wu is active.

Publication


Featured researches published by Hongliu Wu.


Materials Science and Engineering: C | 2015

Guided proliferation and bone-forming functionality on highly ordered large diameter TiO2 nanotube arrays.

Ruopeng Zhang; Hongliu Wu; Jiahua Ni; Changli Zhao; Yifan Chen; Chengjunyi Zheng; Xiaonong Zhang

The significantly enhanced osteoblast adhesion, proliferation and alkaline phosphatase (ALP) activity were observed on TiO2 nanotube surface in recent studies in which the scale of nanotube diameter was restricted under 100 nm. In this paper, a series of highly ordered TiO2 nanotube arrays with larger diameters ranging from 150 nm to 470 nm were fabricated via high voltage anodization. The behaviors of MC3T3-E1 cells in response to the diameter-controlled TiO2 nanotubes were investigated. A contrast between the trend of proliferation and the trend of cell elongation was observed. The highest cell elongation (nearly 10:1) and the lowest cell number were observed on the TiO2 nanotube arrays with 150 nm diameter. While, the lowest cell elongation and highest cell number were achieved on the TiO2 nanotube arrays with 470 nm diameter. Furthermore, the ALP activity peaked on the 150 nm diameter TiO2 nanotube arrays and decreased dramatically with the increase of nanotube diameter. Thus a narrow range of diameter (100-200 nm) that could induce the greatest bone-forming activity is determined. It is expected that more delicate design of orthopedic implant with regional abduction of cell proliferation or bone forming could be achieved by controlling the diameter of TiO2 nanotubes.


Biomedical Materials | 2016

Reduced antibacterial property of metallic magnesium in vivo.

Peng Hou; Changli Zhao; Pengfei Cheng; Hongliu Wu; Jiahua Ni; Shaoxiang Zhang; Tengfei Lou; Chunyang Wang; Pei Han; Xiaonong Zhang; Yimin Chai

Magnesium and its alloys have drawn interest as antibacterial biomaterials, owing to their ability to alkalize the surrounding medium during degradation. The antibacterial effect of pure Mg and Mg alloys in vitro has previously been reported. However, the antibacterial property of Mg in vivo might be different because of the apparently dissimilar corrosion characteristics. In this study, pure Mg rods were implanted and bacterial suspension were injected into rat femurs to investigate the antibacterial property of Mg in vivo. The results showed that contrary to the high antibacterial rate in vitro, Mg exhibited a dramatic drop in antibacterial effect in vivo. Bacteria proliferated on the surface of the Mg rods as well as in the femur. Inflammatory cells filled cavities in the cortical bone of the femur, which was demonstrated by histological and micro-CT examination after 2 and 4 weeks of implantation. It is suggested that a reduced corrosion rate in vivo would result in insufficient pH value. In addition, the deposition layer would prevent further corrosion of Mg and provide a favorite site for bacteria adhesion. Hence, the dramatically reduced antibacterial property of Mg needs to be noticed when it is used as a biomaterial.


Bioactive Materials | 2016

Research of a novel biodegradable surgical staple made of high purity magnesium.

Hongliu Wu; Changli Zhao; Jiahua Ni; Shaoxiang Zhang; Jingyi Liu; Jun Yan; Yigang Chen; Xiaonong Zhang

Surgical staples made of pure titanium and titanium alloys are widely used in gastrointestinal anastomosis. However the Ti staple cannot be absorbed in human body and produce artifacts on computed tomography (CT) and other imaging examination, and cause the risk of incorrect diagnosis. The bioabsorbable staple made from polymers that can degrade in human body environment, is an alternative. In the present study, biodegradable high purity magnesium staples were developed for gastric anastomosis. U-shape staples with two different interior angles, namely original 90° and modified 100°, were designed. Finite element analysis (FEA) showed that the residual stress concentrated on the arc part when the original staple was closed to B-shape, while it concentrated on the feet for the modified staple after closure. The in vitro tests indicated that the arc part of the original staple ruptured firstly after 7 days immersion, whereas the modified one kept intact, demonstrating residual stress greatly affected the corrosion behavior of the HP-Mg staples. The in vivo implantation showed good biocompatibility of the modified Mg staples, without inflammatory reaction 9 weeks post-operation. The Mg staples kept good closure to the Anastomosis, no leaking and bleeding were found, and the staples exhibited no fracture or severe corrosion cracks during the degradation.


Scientific Reports | 2017

Accelerating Corrosion of Pure Magnesium Co-implanted with Titanium in Vivo.

Peng Hou; Pei Han; Changli Zhao; Hongliu Wu; Jiahua Ni; Shaoxiang Zhang; Jingyi Liu; Yuanzhuang Zhang; Haidong Xu; Pengfei Cheng; Shen Liu; Yufeng Zheng; Xiaonong Zhang; Yimin Chai

Magnesium is a type of reactive metal, and is susceptible to galvanic corrosion. In the present study, the impact of coexistence of Ti on the corrosion behavior of high purity Mg (HP Mg) was investigated both in vitro and in vivo. Increased corrosion rate of HP Mg was demonstrated when Mg and Ti discs were not in contact. The in vivo experiments further confirmed accelerating corrosion of HP Mg screws when they were co-implanted with Ti screws into Sprague-Dawley rats’ femur, spacing 5 and 10 mm. Micro CT scan and 3D reconstruction revealed severe corrosion morphology of HP Mg screws. The calculated volume loss was much higher for the HP Mg screw co-implanted with Ti screw as compared to that co-implanted with another Mg screw. Consequently, less new bone tissue ingrowth and lower pullout force were found in the former group. It is hypothesized that the abundant blood vessels on the periosteum act as wires to connect the Mg and Ti screws and form a galvanic-like cell, accelerating the corrosion of Mg. Therefore, a certain distance is critical to maintain the mechanical and biological property of Mg when it is co-implanted with Ti.


ACS Applied Materials & Interfaces | 2017

High-Purity Magnesium Staples Suppress Inflammatory Response in Rectal Anastomoses

Jiazeng Xia; Hui Chen; Jun Yan; Hongliu Wu; Hao Wang; Jian Guo; Xiaonong Zhang; Shaoxiang Zhang; Changli Zhao; Yigang Chen

Magnesium-based materials are promising biodegradable implants, although the impact of magnesium on rectal anastomotic inflammation is poorly understood. Thus, we investigated the inflammatory effects of high-purity Mg staples in rectal anastomoses by in vivo luciferase reporter gene expression in transgenic mice, hematoxylin-eosin staining, immunohistochemistry, and Western blotting. As expected, strong IL-1β-mediated inflammation and inflammatory cell infiltration were observed 1 day after rectal anastomoses were stapled with high-purity Mg or Ti. However, inflammation and inflammatory cell infiltration decreased more robustly 4-7 days postoperation in tissues stapled with high-purity Mg. This rapid reduction in inflammation was confirmed by immunohistochemical analysis of IL-6 and TNF-α. Western blot also suggested that the reduced inflammatory response is due to suppressed TLR4/NF-κB signaling. In contrast, MCP-1, uPAR, and VEGF were abundantly expressed, in line with the notion that expression of these proteins is regulated by feedback between the VEGF and NF-κB pathways. In vitro expression of MCP-1, uPAR, and VEGF was also similarly high in primary rectal mucosal epithelial cells exposed to extracts from Mg staples, as measured by antibody array. Collectively, the results suggest that high-purity Mg staples suppress the inflammatory response during rectal anastomoses via TLR4/NF-κB and VEGF signaling.


Biomaterials | 2016

High-purity magnesium interference screws promote fibrocartilaginous entheses regeneration in the anterior cruciate ligament reconstruction rabbit model via accumulation of BMP-2 and VEGF

Pengfei Cheng; Pei Han; Changli Zhao; Shaoxiang Zhang; Hongliu Wu; Jiahua Ni; Peng Hou; Yuanzhuang Zhang; Jingyi Liu; Haidong Xu; Shen Liu; Xiaonong Zhang; Yufeng Zheng; Yimin Chai


Composites Science and Technology | 2017

Development of PLA/Mg composite for orthopedic implant: Tunable degradation and enhanced mineralization

Changli Zhao; Hongliu Wu; Jiahua Ni; Shaoxiang Zhang; Xiaonong Zhang


Progress in Natural Science: Materials International | 2014

Doping inorganic ions to regulate bioactivity of Ca-P coating on bioabsorbable high purity magnesium

Hongliu Wu; Ruopeng Zhang; Xiao Li; Jiahua Ni; Changli Zhao; Yang Song; Jiawei Wang; Shaoxiang Zhang; Yufeng Zheng; Xiaonong Zhang


Nano-micro Letters | 2016

Study of Cell Behaviors on Anodized TiO2 Nanotube Arrays with Coexisting Multi-Size Diameters

Yifan Chen; Jiahua Ni; Hongliu Wu; Ruopeng Zhang; Changli Zhao; Wenzhi Chen; Feiqing Zhang; Shaoxiang Zhang; Xiaonong Zhang


Materials Letters | 2016

Enhanced corrosion resistance and antibacterial property of Zn doped DCPD coating on biodegradable Mg

Changli Zhao; Hongliu Wu; Peng Hou; Jiahua Ni; Pei Han; Xiaonong Zhang

Collaboration


Dive into the Hongliu Wu's collaboration.

Top Co-Authors

Avatar

Changli Zhao

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Xiaonong Zhang

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Jiahua Ni

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Shaoxiang Zhang

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Pei Han

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Peng Hou

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Pengfei Cheng

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Ruopeng Zhang

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar

Yimin Chai

Shanghai Jiao Tong University

View shared research outputs
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge