Hsiao-Fan Tseng

Asymmetric Polymer Particles with Anisotropic Curvatures by Annealing Polystyrene Microspheres on Poly(vinyl alcohol) Films

Anisotropic polymer particles such as Janus particles have attracted significant attention in recent years because of their unique properties and unusual self-assembly behavior. Most anisotropic polymer particles synthesized so far, however, only have different chemical regions compartmentalized on the particles. It remains a great challenge to fabricate anisotropic polymer particles with different shapes within a single particle. A novel approach is developed to prepare anisotropic polymer particles that contain two hemispheres with different curvatures by annealing polystyrene microspheres on poly(vinyl alcohol) films. During the annealing process, the polymer microspheres gradually sink into the polymer films and transform to asymmetric polymer particles, driven by the surface and interfacial tensions of the polymers. Selective removal techniques are also used to confirm the morphologies of the asymmetric particles.

Plateau–Rayleigh Instability Morphology Evolution (PRIME): From Electrospun Core–Shell Polymer Fibers to Polymer Microbowls

Electrospun core-shell fibers have great potentials in many areas, such as tissue engineering, drug delivery, and organic solar cells. Although many core-shell fibers have been prepared and studied, the morphology transformation of core-shell fibers have been rarely studied. In this work, the morphology evolution of electrospun core-shell polymer fibers driven by the Plateau-Rayleigh instability is investigated. Polystyrene/poly(methyl methacrylate) (PS/PMMA) core-shell fibers are first prepared by using blend solutions and a single axial electrospinning setup. After PS/PMMA core-shell fibers are annealed on a PS film, the fibers undulate and sink into the polymer film, forming core-shell hemispheres. The evolution process, which can be observed in situ by optical microscopy, is mainly driven by achieving lower surface and interfacial energies. The morphologies of the transformed structures can be confirmed by a selective removal technique, and polymer microbowls can be obtained.

Fabrication and Thermal Insulation Properties of Bamboo-Shaped Polymer Fibers by Selective Solvent Vapor Annealing

Fibrillar materials have gained much attention recently because of their unique properties and potential applications. Although many methods have been developed to fabricate materials, it remains challenging to prepare fibrillar materials containing multicomponent materials or even with complex structures. Here, a facile strategy is developed to fabricate bamboo-shaped fibers by treating electrospun polymer core-shell fibers with solvent vapor annealing. Electrospun polystyrene (PS)/poly(methyl methacrylate) (PMMA) core-shell fibers are first prepared by electrospinning PS/PMMA blend solutions via a phase separation process. When the PS/PMMA core-shell fibers are annealed with the vapor of cyclohexane, which swells and delocalizes the PS domains selectively, the fibers transform into bamboo-shaped structures. The bamboo-shaped structures can be further examined by swelling and delocalizing the PMMA domains selectively, revealing the undulated PS structures. The thermal insulation properties of the fibers with bamboo-shaped structures are observed to be enhanced compared with the original polymer core-shell fibers.

Hierarchical Polymer Structures Using Templates and the Modified Breath Figure Method

Hierarchical structures are commonly observed in nature and possess unique properties. The fabrication of hierarchical structures with well-controlled sizes in different length scales, however, is still a great challenge. To further understand the morphologies and properties of the hierarchical structures, here we present a novel strategy to prepare hierarchical polymer structures by combining the modified breath figure method and the template method. Poly(methyl methacrylate) (PMMA) honeycomb films with regular micropores are first prepared using the modified breath figure method by dipping PMMA films into mixtures of chloroform and methanol. The polymer chains on the honeycomb films are then annealed and wetted into the nanopores of anodic aluminum oxide templates via capillary forces, resulting in the formation of hierarchical polymer structures. The morphologies of the polymer structures, which can be controlled by the molecular weights of the polymers and the concentrations of the polymer solutions, are characterized by scanning electron microscopy. The surface wettabilities of the polymer structures are also examined by water contact angle measurements, and the hierarchical structures are observed to be more hydrophobic than the flat films and honeycomb films. This work not only provides a feasible approach to fabricate hierarchical polymer structures with controlled sizes but also gives a better understanding of the relationship between surface morphologies and properties.

Solvent-Induced Shape Recovery of Anisotropic Polymer Particles Prepared by a Modified Thermal Stretching Method

Anisotropic polymer particles have attracted great attention because of their unique properties and potential applications in various areas, such as microelectronics, drug delivery, and medical imaging. The fabrication and morphology control, especially the shape recovery, of anisotropic polymer particles, however, remains a challenging task. In this work, we develop a novel strategy to fabricate anisotropic polymer particles by thermally stretching poly(vinyl alcohol) (PVA) films embedding polystyrene (PS) microspheres using a weight. Depending on the preannealing condition, anisotropic PS particles with two different shapes, sharp-headed and blunt-headed PS particles, can be obtained. The PVA films can be selectively removed by isopropanol/water, releasing the anisotropic PS particles. By adding tetrahydrofuran (THF), a good solvent for PS, into the PS particle-containing solutions, the anisotropic particles gradually transform back to spheres to reduce the total interfacial energies. The shape recovery rates of the polymer particles can be controlled by the amount of the added THF. This work not only provides a simple and feasible route to fabricate anisotropic polymer particles but also contributes to a deeper understanding in the solvent-induced shape recovery process from anisotropic polymer particles to polymer spheres.

Thermal-Annealing-Induced Self-Stretching: Fabrication of Anisotropic Polymer Particles on Polymer Films

Designing anisotropic particles of various shapes draws great attention to scientists nowadays. We develop a facile and simple method to fabricate anisotropic polymer particles from spherical polymer particles. Poly(vinyl alcohol) (PVA) films spin-coated with polystyrene (PS) microspheres are confined on both sides using binder clips and are heated above the glass-transition temperatures of the polymers. During the thermal annealing process, the PS particles sink into the PVA films and transform to anisotropic particles. Depending on the distances to the bound regions, oblate spheroid PS particles or prolate spheroid particles with different aspect ratios can be obtained. The transformation of the particles is mainly driven by the stretching forces and the squeezing forces. The main advantage of this method is that anisotropic particles with different shapes can be fabricated simultaneously on a single film. We expect that this novel method can be helpful to various fields including colloids science, suspension rheology, and drug delivery.