Hua Miao

The study of transition on NiFe2O4 nanoparticles prepared by co-precipitation/calcination

In this study, the NiFe2O4 nanoparticles have been prepared by co-precipitation and calcination process. Using a vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive spectrometer of X-ray (EDX), and X-ray photoelectron spectroscopy (XPS), the samples obtained by co-precipitation and then by further calcination have been analyzed. The experimental results show that the precursor synthesized by co-precipitation is the composite of both amorphous FeOOH and Ni(OH)2, but has no amorphous NiFe2O4. The results of both EDX and XPS revealed that the FeOOH species is wrapped up by Ni(OH)2 species. In the calcination process, the amorphous composite is dehydrated and transformed gradually into crystalline NiFe2O4 nanoparticles, with the metal ions diffusing. The reaction is different from the one used to prepare other ferrite (e.g., CoFe2O4, MnFe2O4, Fe3O4, etc.) nanoparticles directly by co-precipitation. With increasing calcination temperature, the NiFe2O4 grains grow and the magnetization is enhanced.

Saturation Magnetization and Law of Approach to Saturation for Self-formed Ionic Ferrofluids Based on MnFe2O4 Nanoparticles

The magnetization curves of MnFe2O4 nanoparticles and self-formed ferrofluids based on these particles have been measured at room temperature. The median size of the particles is 13.67 nm. The specific saturation magnetization is less than the theoretical value for the ferrofluids. In the high field range from 5 kOe to 10 kOe, the higher the particle volume fraction is, the steeper the slope of the magnetization curves is when it approaches saturation. The behavior of the saturation magnetization and the law of approach to saturation are due to the presence of self-assembled aggregates of ring-like micelle structures which form in the absence of the magnetic field and field-induced aggregates, respectively. The field-induced aggregates have a dissipative structure, so that at high field, the law of approach to saturation magnetization is different from the one described using Langevin paramagnetism theory. The large particles in the ferrofluids result in apparent hysteresis.

Magnetisation behaviour of mixtures of ferrofluids and paramagnetic fluids with same particle volume fractions

In this study, γ-Fe2O3 ferrimagnetic nanoparticles and paramagnetic nanoparticles of p-MgFe2O4 (a hydroxide precursor for the preparation of magnesium ferrite materials) are produced by chemical precipitation technology. The γ-Fe2O3 ferrofluids and p-MgFe2O4 paramagnetic fluids are synthesised by Massarts method. The binary ferrofluids are obtained by mixing the ferrofluids and the paramagnetic fluids. There is insufficient magnetic interaction to aggregate the γ-Fe2O3 ferrimagnetic system and the p-MgFe2O4 paramagnetic system, so the magnetisation behaviour of the binary ferrofluids can be explored with reference to those of the single fluids. The magnetisation behaviour of single γ-Fe2O3 ferrofluids may be described by a model of gas-like compression. In the absence of a magnetic field, some particles can self-assemble into aggregates with a closed ring-like structure which make no contribution to the magnetisation of the γ-Fe2O3 ferrofluids. These ring-like aggregates result in the measured saturation magnetisation of the γ-Fe2O3 ferrofluids being smaller than the theoretical value calculated from the particles. During the magnetisation process, the polarised p-MgFe2O4 particles gas can orient the rings towards the direction of the field, so that the rings may fragment. Therefore, the measured saturation magnetisation of the γ-Fe2O3 ferrofluid component of the binary ferrofluids strengthens and the magnetisation process becomes easier than for pure γ-Fe2O3 ferrofluids.

Preparation of γ-Fe2O3/Ni2O3/FeCl3(FeCl2) Composite Nanoparticles by Hydrothermal Process Useful for Ferrofluids

Using a hydrothermal process in FeCl2 solution, γ-Fe2O3/Ni2O3/FeCl3(FeCl2) composite nanoparticles were obtained from the FeOOH/Ni(OH)2 precursor prepared by coprecipitation. The precursor and the as-prepared nanoparticles were investigated by vibrating sample magnetometer (VSM), X-ray diffraction (XRD), energy disperse X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The experimental results showed that the paramagnetic amorphous precursor, in which Ni(OH)2 is formed outside FeOOH, is transformed to ferrimagnetic γ-Fe2O3/Ni2O3 composite when it is processed in FeCl2 solution (0.25, 0.50, 1.00 M) in an autoclave at 100°C for 1 hr. In addition, the dismutation reaction of FeCl2 produces FeCl3 and Fe. Some FeCl3 and little FeCl2 can be absorbed to form γ-Fe2O3/Ni2O3/FeCl3(FeCl2) composite nanoparticles in which Ni2O3 forms outside the γ-Fe2O3 core and the outermost layer is FeCl3 (FeCl2). The content of FeCl3 (FeCl2) in the particles increased, and the magnetization of the particles decreased with the concentration of FeCl2 solution increasing in the hydrothermal process. The FeCl3 (FeCl2) surface is chemically passive and nonmagnetic (paramagnetic). Accordingly, the composite nanoparticles are chemically stable, and their aggregation is prevented. The specific saturation magnetization of such composite nanoparticles can get to 57.4–62.2 emu/g and could be very suitable for synthesizing ferrofluids.

ZnFe2O4 Modified by Fe(NO3)3 for the Synthesis of Ionic Ferrofluids

Weak magnetic ZnFe2O4 nanoparticles were prepared by coprecipitation and treated with different concentrations of Fe(NO3)3 solution. Untreated and treated particles were studied using a vibrating sample magnetometer, transmission electron microscope, by X-ray diffraction, X-ray energy dispersive spectroscopy and X photoelectron spectroscopy. The results showed that, after treatment, the ZnFe2O4/γ-Fe2O3 forms disphase nanoparticles, with enlarged size, enhanced magnetic properties and with a surface parceled with Fe(NO3)3. The size of the particles and their magnetic properties are related to the concentration of the treatment solution. The particle size and magnetic properties could be controlled by controlling the concentration of treating solution, therefore nanoparticles can be more widely used.