Huagang Ni

Solvent effect on the film formation and the stability of the surface properties of poly(methyl methacrylate) end-capped with fluorinated units.

The surface structure and stability (the resistance to surface reconstruction) of end-capped poly(methyl methacrylate) films were greatly affected by the solvents used for film preparation. Films of end-capped PMMA with about four 2-perfluorooctylethyl methacrylate units cast with benzotrifluoride solution exhibited excellent stability and resistance to polar environments compared with those cast with cyclohexanone and toluene solutions. The observed difference in stability between these fluorinated surfaces is attributed to their surface microstructures formed during the film formation processes, which are closely related to the associative behavior of the end-capped PMMA in the solution. A relatively perfect close-packed and well-ordered structure of the perfluoroalkyl side chains at the surface of the PMMA(857)-ec-FMA(3.3) film was formed when the film was cast with benzotrifluoride solution, in which only unimers existed. This study indicates that such a solvent effect may be used to promote the formation of a well-ordered packing structure of the fluorinated moieties at the film surface. The ordering of the packing structure is to a certain extent more important than the content of the fluorinated moieties at the surface for improving the surface stability.

Surface segregation of fluorinated moieties on poly(methyl methacrylate-ran-2-perfluorooctylethyl methacrylate) films during film formation: Entropic or enthalpic influences

The effects of solvents, fluorinated monomer content and film-formation methods on the surface structures of random copolymers composed of methyl methacrylate (MMA) and 2-perfluorooctylethyl methacrylate (FMA) were investigated by contact angle goniometry, X-ray photoelectron spectroscopy, sum frequency generation (SFG) vibrational spectroscopy and surface tension measurement. It is found that, with cyclohexanone as the solvent, there is a critical FMA content of 9mol%, below which the copolymer films by spin coating have a more surface segregation extent of fluorinated moieties than those by solution casting; above which the copolymer films by solution casting have a more surface segregation extent of fluorinated moieties than those by spin coating. However, with toluene as solvent, the critical FMA content lowers down to 3mol%. We believe that the solvent nature and the content of fluorinated moieties in the random copolymer have the great effect because the combined effect of these two factors can determine the random copolymer chain conformations and their thermodynamic dominating factors in the solution and at the solution-air interface. A thermodynamic analysis combining the entropic and enthalpic effects is suggested to explain the observed phenomenon. This research is believed to obtain an enhanced understanding of the surface formation mechanism of the polymer films and thus demonstrate how to promote the segregation of fluorinated moieties at the polymer film surfaces.

Studies on the effects of the alkyl group on the surface segregation of poly(n-alkyl methacrylate) end-capped 2-perfluorooctylethyl methacrylate films.

The effects of the alkyl group on the surface segregation of poly(n-alkyl methacrylate) end-capped with various numbers of units of 2-perfluorooctylethyl methacrylate (FMA) (PnAMA-ec-PFMA) were investigated by differential scanning calorimetry, angle-resolved XPS analysis, contact angle measurements, and X-ray diffraction (XRD). The results show that with similar numbers of FMA units at the polymer chain end the extent of fluorine segregation (Q) increased with increasing the number of carbon atoms in the side n-alkyl chains of poly(n-alkyl methacrylate). The surface fluorine content within 5 nm deep of the film of poly(n-octadecyl methacrylate) end-capped with one FMA unit (PODMA(160)-ec-PFMA(1.0)) was 208-fold higher than that of the bulk level. These observed differences in Q values were found due to the aggregate structure of the end-capped polymers in the solution, the flexibility, and the crystallinity of the n-alkyl side chains. When the nonfluorinated block was completely amorphous, the molecular aggregate structure of the end-capped polymers in the solution played an important role in the surface segregation of the fluorinated moieties on the resulting film. However, when the nonfluorinated block was crystalline, crystallinity would enhance greatly the segregation of the fluorinated moieties.

Protein-resistance performance enhanced by formation of highly-ordered perfluorinated alkyls on fluorinated polymer surfaces.

In this paper, the relationship between the surface structure of fluorinated polymers and their protein-resistant property was studied by preparing films of poly(n-alkyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate (FMA) (PFMA(y)-ec-PnAMA(x)-ec-PFMA(y)) with various ordered structures of perfluorinated alkyls. These fluorinated polymers were synthesized via a controlled/living atom-transfer radical polymerization (ATRP) method. Both the surface free energy and the CF(3)/CF(2) ratio obtained by X-ray photoelectron spectroscopy (XPS) were employed to scale the ordered structures of the perfluorinated alkyls. Protein adsorption studies using fibrinogen as a test molecule were undertaken on the various films by XPS. The results show that the adsorbed mass of fibrinogen decreased linearly with increasing CF(3)/CF(2) ratio on the fluorinated polymer surfaces. When the CF(3)/CF(2) ratio reaches 0.26, there was almost no fibrinogen adsorption. This work not only demonstrates the design of a fluorinated copolymer film on glass substrate with desirable protein-resistant performance, but also provides a fundamental understanding of how the orientation of perfluoroalkyl side chains affects protein-resistant behavior on fluorinated surfaces.

Enhanced surface segregation of poly(methyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate by introduction of a second block

New fluorinated copolymers of poly(methyl methacrylate)-b-poly(butyl methacrylate) or poly(n-octadecyl methacrylate) end-capped with 2-perfluorooctylethyl methacrylate (PMMA(x)-b-PBMA(y)-ec-PFMA(z) or PMMA(x)-b-PODMA(y)-ec-PFMA(z)) were synthesized by living atom transfer radical polymerization. Thin films made of PMMA(230)-b-PODMA(y)-ec-PFMA(1) were characterized by differential scanning calorimetry, angle-resolved X-ray photoelectron spectroscopy and X-ray diffraction. These films were found to exhibit robust surface segregation of the end groups. Furthermore, the fluorine enrichment factor at the film surface was found to increase linearly with increasing degree of polymerization of poly(n-octadecyl methacrylate) and its increasing fusion enthalpy in the second block, which enhances the segregation of the fluorinated moieties.

Metalloporphyrin-based porous polymers prepared via click chemistry for size-selective adsorption of protein

Abstract Zinc porphyrin-based porous polymers (PPs-Zn) with different pore sizes were prepared by controlling the reaction condition of click chemistry, and the protein adsorption in PPs-Zn and the catalytic activity of immobilized enzyme were investigated. PPs-Zn-1 with 18 nm and PPS-Zn-2 with 90 nm of pore size were characterized by FTIR, NMR and nitrogen absorption experiments. The amount of adsorbed protein in PPs-Zn-1 was more than that in PPs-Zn-2 for small size proteins, such as lysozyme, lipase and bovine serum albumin (BSA). And for large size proteins including myosin and human fibrinogen (HFg), the amount of adsorbed protein in PPs-Zn-1 was less than that in PPs-Zn-2. The result indicates that the protein adsorption is size-selective in PPs-Zn. Both the protein size and the pore size have a significant effect on the amount of adsorbed protein in the PPs-Zn. Lipase and lysozyme immobilized in PPs-Zn exhibited excellent reuse stability.