Huang-Hao Yang

Interaction of a novel red-region fluorescent probe, Nile Blue, with DNA and its application to nucleic acids assay

A novel fluorimetric method was developed for the rapid determination of DNA and RNA based on their quenching effect on the cationic red-region fluorescent dye Nile Blue (NB). In the investigation of the interaction of NB with DNA by steady-state polarization measurements, thermal denaturing study, determination of absorption and fluorescence characteristics, salt effect study and electrophoresis experiments, the results supported the suggestion that NB served as an intercalator to the stack base pairs of nucleic acids. Further evidence showed that the quenching could be ascribed to the static quenching mode. A binding constant of about 10(6) M-1 and a binding site size of about three base pairs were obtained by spectral methods. Under optimum conditions, the calibration curves for the determination of calf thymus DNA (CT DNA) and yeast RNA were linear over the ranges 3.0 ng mL-1-2.0 micrograms mL-1 and 27 ng mL-1-10 micrograms mL-1, respectively. The detection limits were 3.0 ng mL-1 for CT DNA and 27 ng mL-1 for RNA. The relative standard deviation (n = 6) was within 2.1% in the middle of the linear range. Interferences from some interesting co-existing substances in the determination of DNA were also examined.

Preparation of pH-sensitive polymer by thermal initiation polymerization and its application in fluorescence immunoassay

A fluorescence immunoassay for human IgG (Ag) was developed using a pH-sensitive polymer prepared by thermal initiation or redox initiation polymerization as a carrier. In the competitive immunoassay, appropriate quantity of Ag was immobilized on the polymer and the standard Ag (or sample) solution, and a constant amount of fluorescein isothiocyanate labeled goat anti-human IgG antibody (Ab-FITC) was added. Immobilized Ag and the standard (or sample) Ag competed for binding to the Ab-FITC in 37 degrees C in homogeneous format. After changing the pH to separate the polymer-immune complex precipitate, it was re-dissolved and determined by fluorescence method. The results showed that the immobilization efficiency, immunological reaction activities of immobilized Ag and phase transition pH range were improved as Ag was immobilized by thermal initiation instead of redox initiation polymerization. Under optimum conditions, the calibration graphs for the Ag in both methods, thermal initiation and redox initiation, were linear over the concentration range of 0.0-1000ngmL(-1), with detection limits 8 (thermal initiation) and 12ngmL(-1) (redox initiation), respectively. Moreover, some pH-sensitive polymer prepared only in organic solvent or under high temperature could also be used as an immunoreaction carrier by thermal initiation polymerization. Thermal initiation polymerization was a better immobilization mode.

Nanometer fluorescent hybrid silica particle as ultrasensitive and photostable biological labels

Nanometer-sized fluorescent hybrid silica (NFHS) particles were prepared for use as sensitive and photostable fluorescent probes in biological staining and diagnostics. The first step of the synthesis involves the covalent modification of 3-aminopropyltrimethoxysilane with an organic fluorophore, such as fluorescein isothiocyanate, under N2 atmosphere for getting a fluorescent silica precursor. Then the NFHS particles, with a diameter of well below 40 nm, were prepared by controlled hydrolysis of the fluorescent silica precursor with tetramethoxysilane (TMOS) using the reverse micelle technique. The fluorophores are dispersed homogeneously in the silica network of the NFHS particles and well protected from the environmental oxygen. Furthermore, since the fluorophores are covalently bound to the silica network, there is no migration, aggregation and leakage of the fluorophores. In comparison with common single organic fluorophores, these particle probes are brighter, more stable against photobleaching and do not suffer from intermittent on/off light emission (blinking). We have used these newly developed NFHS particles as a fluorescent marker to label antibodies, using silica immobilization method, for the immunoassay of human alpha-fetoprotein (AFP). The detection limit of this method was down to 0.05 ng mL(-1) under our current experimental conditions. We think this material would attract much attention and be applied widely in biotechnology.

Flow injection fluorescence immunoassay for gentamicin using sol-gel-derived mesoporous biomaterial

Sol-gel-derived mesoporous biomaterials were used for the first time in the flow-injection fluorescence immunoassay system. Anti-gentamicin antibody was immobilized in a mesoporous sol-gel material using tetramethoxysilane as a precursor and poly(ethylene glycol) as a template. The sol-gel glass was used to develop an immunoaffinity column for the flow-injection immunoassay of gentamicin. Little unspecific adsorption of gentamicin on the sol-gel and no antibody leaching under harsh elution conditions were found. The immunoassay is based on the competition between gentamicin and fluorescein isothiocyanate-labeled gentamicin for a limited number of encapsulated antibody binding sites. NaOH solution of 5 x 10(-3)mol/L is used for the regeneration of encapsulated antibody binding sites after each measurement, which allows the immunoreactor to be used for up to 20 times without any loss of reactivity. Sample preconcentration is not needed and a single assay can be performed within 10 min. The calibration for gentamicin has a working range of 250-5000 ng/mL with a detection limit of 200 ng/mL, which is close to that of the fluorescence immunoassay and fluorescence polarization immunoassay using the same reactants. Comparison of the results from this method with that obtained from HPLC showed an excellent correlation.

Novel spectrofluorimetric method for the determination of thiamine with iron(III) tetrasulfonatophthalocyanine as a catalyst

A sensitive, selective and rapid spectrofluorimetric method is proposed for the determination of thiamine by using mimetic enzyme iron(III) tetrasulfonatophthalocyanine (FeTSPc) as a catalyst for the oxidation reaction between thiamine and hydrogen peroxide. It is based on the oxidation of thiamine in alkaline medium to give an intensively fluorescent compound, which has an excitation wavelength of 375 nm and an emission wavelength of 440 nm. The determination was found to be activated by fluorogenic substrates with a p-hydroxyphenyl structure such as L-tyrosine, tyramine and p-hydroxyphenylpropionic acid. Under optimum conditions, the responses for thiamine were linear from 1.0 × 10–8 to 1.0 × 10–4 mol L–1, with a detection limit of 4.3 × 10–9 mol L–1. The relative standard deviation was 2.2% for 2.0 × 10–7 mol L–1 thiamine (n = 6). The activation of the p-hydroxyphenyl substrates, the effects of some experimental conditions and the influence of foreign substances were investigated. The potential application of the method was tested by selectively determining thiamine in commercial vitamin B1, vitamin B complex and rice.

Determination of proteins at nanogram levels by a resonance light-scattering technique with tetra-substituted sulphonated aluminum phthalocyanine

This is the first report on the determination of proteins with tetra-substituted sulphonated aluminum phthalocyanine (AlS(4)Pc) by resonance light-scattering (RLS). At pH 3.0, the weak RLS of AlS(4)Pc can be enhanced by the addition of proteins. Based on this, a novel quantitative method has been developed for the determination of proteins in aqueous solutions. Under optimal conditions, the linear ranges of the calibration curves were 0.050-2.0 mug ml(-1) for both human serum albumin (HSA) and human r-IgG. The detection limits were 12.7 ng ml(-1) for HSA and 16.1 ng ml(-1) for human r-IgG. The method has been applied to the analysis of total protein in human serum samples collected from the hospital and the results were in good agreement with those reported by the hospital, which indicates that the method presented here is not only sensitive, simple, but also reliable and suitable for practical applications.

A new red-region substrate, tetra-substituted amino aluminium phthalocyanine, for the fluorimetric determination of H2O2 catalyzed by mimetic peroxidases

A new red-region fluorogenic substrate, tetra-substituted amino aluminium pthalocyanine, was developed for the selective determination of H2O2 based on the catalytic effect of mimetic peroxidases, viz., hemin or iron tetrasulfonatophthalocyanine (FeTSPc). Under the optimum conditions, the linearity of the calibration graph for the determination of H2O2 with hemin (or FeTSPc) as the catalyst was in the range from 0.0 to 3.0 x 10(-7) mol L-1 (or from 0.0 to 2.0 x 10(-6) mol L-1). The detection limits were 3.7 x 10(-9) and 4.9 x 10(-9) mol L-1 H2O2, respectively. The relative standard deviation (n = 7) was within 1.5% in the middle of the linear range. The peroxidase activity of the mimetic enzymes hemin and FeTSPc, the effects of some experimental conditions and the influence of foreign substances were investigated. With this substrate, 0.0-7.5 x 10(-8) mol L-1 hemin and 0.0-2.0 x 10(-6) mol L-1 FeTSPc can be determined with an accuracy and precision of about 1.3%. The potential application of the reagent was tested by the determination of H2O2 in rainwater.

Temperature modulated solubility and activity alteration for oligo-(N-isopropylacrylamide)-iron tetrasulfonatophthalocyanine conjugates as a new mimetic peroxidase

Iron tetrasulfonatophthalocyanine (FeTSPc) was covalently bound to the terminus of a temperature sensitive oligomer, oligo-N-isopropylacrylamide (ONIPAAm), to form a new mimetic enzyme (ONIPAAm–FeTSPc) to mimic the peroxidase activity of horseradish peroxidase. This FeTSPc-based mimetic enzyme exhibits a lower critical solution temperature (LCST) of 32 °C in neutral solution. It precipitates from water above the LCST and redissolves when the solution temperature is lowered below the LCST. The peroxidase activity of this mimetic enzyme was studied based on its catalytic effect on the reaction of p-hydroxyphenylpropionic acid and H2O2. The results show that the peroxidase activity of the new mimetic enzyme is higher than that of the free FeTSPc. The possibility of its application in the analytical field was also tested by the determination of H2O2 and ONIPAAm–FeTSPc; the detection limits are 8.2 × 10−9 and 1.7 × 10−9 mol L−1, respectively.

A Novel Flow‐Injection Analysis Method of Glucose Based on Template‐Synthesized Sol–Gel Nanotube Array Enzyme Membrane Reactor

Abstract A synthetic enzyme‐loading nanotube membrane was developed and used in flow‐injection analysis (FIA) for the first time. The membrane was based on an anodic alumina oxide (AAO) film that has cylindrical pores with monodisperse nanoscopic diameters, and silica nanotubes (SNTs) were chemically synthesized within the pores of this film through sol–gel chemistry. Horseradish peroxidase (HRP) was immobilized on the inner walls of the SNTs. The fabrication and initial testing of a flow‐through membrane reactor design for heterogeneous enzyme reactions were presented and applied to the determination of glucose in real samples. This novel immobilized enzyme membrane reactor possesses some advantages over both open‐tubular and packed‐bed reactors often used in FIA. The present work shows that the membrane containing SNTs offers considerable potential and new perspectives for the use of such nanomaterials.

Exploitation of reversed micelles as a medium in mimetic peroxidase-catalyzed fluorogenic reaction between hydrogen peroxide and l-tyrosine.

The peroxidase activity of mimetic enzyme, iron tetrasulfonatophthalocyanine (FeTSPc), was characterized in reversed micelles of hexadecyltrimethylammonium bromide (CTAB) formed in n-heptane-n-pentanol solution (2:1, V:V). The assay is based on its catalytic effect on the oxidation reaction of l-tyrosine (l-tyr) by hydrogen peroxide. The influences of environmental factors, such as the water content, CTAB concentration and pH, on the peroxidase activity of FeTSPc were investigated. It was observed that the reaction rate was distinctly enhanced in CTAB reversed micelles as compared with the rate in aqueous solution. Under optimum conditions, application of the FeTSPc-catalyzed fluorescence system in reversed micelles to the determination of H(2)O(2) and FeTSPc led to a highly sensitive system compared with that in aqueous solution, permitting detection limits of 5x10(-9) mol l(-1) H(2)O(2) and 2.3x10(-9) mol l(-1) FeTSPc. The advantages and limitations of employing the reversed micellar media in such mimetic peroxidase-catalyzed fluorescent detection schemes were discussed.