Hubert Rauscher

Micro-stamped surfaces for the patterned growth of neural stem cells

We present a method for patterning neural stem cells based on pre-patterning polypeptides on a cell-repellent surface (poly(ethylene) oxide-like, PEO-like, plasma-deposited films). The method ensures cell attachment and stability for several weeks, as well as it allows cell migration and differentiation. Various patterns of approximately 1 nm thick cell adhesive poly-L-lysine (PLL) have been created on a cell-repellent PEO-like matrix by microcontact printing using different array configurations and printing conditions. The cell-repellent property of PEO-like film determined the confinement of the cells on the printed patterns. Optimization of the printing method showed that the most homogeneous patterns over large areas were obtained using PLL diluted in carbonate buffer (100mM) at pH 8.4. Neural stem cells cultured on the PLL patterns in low serum and in differentiating medium over 20 days exhibited a good confinement to the polypeptide domains. The number of cells attached increased linearly with the micro-stamped PLL area. The cells were able to extend random axon-like projections to the outside of the patterns and presented high amount of ramifications when cultured in differentiating medium. Migration and axon-like outgrowth have been successfully guided by means of an interconnected squares configuration. The surfaces are suitable for controlling the patterning of stem cells and provide a platform for the assessment of the way how different cell arrangements and culture conditions influence cell interactions and cell developmental processes.

Low pressure plasma discharges for the sterilization and decontamination of surfaces

The mechanisms of sterilization and decontamination of surfaces are compared in direct and post discharge plasma treatments in two low-pressure reactors, microwave and inductively coupled plasma. It is shown that the removal of various biomolecules, such as proteins, pyrogens or peptides, can be obtained at high rates and low temperatures in the inductively coupled plasma (ICP) by using Ar/O2 mixtures. Similar efficiency is obtained for bacterial spores. Analysis of the discharge conditions illustrates the role of ion bombardment associated with O radicals, leading to a fast etching of organic matter. By contrast, the conditions obtained in the post discharge lead to much lower etching rates but also to a chemical modification of pyrogens, leading to their de-activation. The advantages of the two processes are discussed for the application to the practical case of decontamination of medical devices and reduction of hospital infections, illustrating the advantages and drawbacks of the two approaches.

Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries

Nanotechnology has the potential to innovate the agricultural, feed and food sectors (hereinafter referred to as agri/feed/food). Applications that are marketed already include nano-encapsulated agrochemicals or nutrients, antimicrobial nanoparticles and active and intelligent food packaging. Many nano-enabled products are currently under research and development, and may enter the market in the near future. As for any other regulated product, applicants applying for market approval have to demonstrate the safe use of such new products without posing undue safety risks to the consumer and the environment. Several countries all over the world have been active in examining the appropriateness of their regulatory frameworks for dealing with nanotechnologies. As a consequence of this, different approaches have been taken in regulating nano-based products in agri/feed/food. The EU, along with Switzerland, were identified to be the only world region where nano-specific provisions have been incorporated in existing legislation, while in other regions nanomaterials are regulated more implicitly by mainly building on guidance for industry. This paper presents an overview and discusses the state of the art of different regulatory measures for nanomaterials in agri/feed/food, including legislation and guidance for safety assessment in EU and non-EU countries.

PtxRu1−x/Ru(0001) surface alloys—formation and atom distribution

The formation of PtRu surface alloys by deposition of submonolayer Pt films on a Ru(0001) substrate and subsequent annealing to about 1350 K and the distribution of the Pt atoms in the surface layer were investigated by scanning tunneling microscopy. Quantitative statistical analysis reveals (i) negligible losses of Pt into subsurface regions up to coverages close below 1 monolayer, (ii) a homogeneous distribution of the Pt atoms over the surface, and (iii) the absence of a distinct long-range or short-range order in the surface layer. In addition, the density of specific adsorption ensembles is analyzed as a function of Pt surface content. Possible conclusions on the process for surface alloy formation are discussed. The results are compared with the properties of PtRu bulk alloys and the findings in previous adsorption studies on similar surface alloys (H. Rauscher, T. Hager, T. Diemant, H. Hoster, F. Bautier de Mongeot and R. J. Behm, Surf. Sci., 2007, 601, 4608; T. Diemant, H Rauscher and R. J. Behm, J. Phys. Chem. C, in press).

Techniques and Protocols for Dispersing Nanoparticle Powders in Aqueous Media—Is there a Rationale for Harmonization?

Selecting appropriate ways of bringing engineered nanoparticles (ENP) into aqueous dispersion is a main obstacle for testing, and thus for understanding and evaluating, their potential adverse effects to the environment and human health. Using different methods to prepare (stock) dispersions of the same ENP may be a source of variation in the toxicity measured. Harmonization and standardization of dispersion methods applied in mammalian and ecotoxicity testing are needed to ensure a comparable data quality and to minimize test artifacts produced by modifications of ENP during the dispersion preparation process. Such harmonization and standardization will also enhance comparability among tests, labs, and studies on different types of ENP. The scope of this review was to critically discuss the essential parameters in dispersion protocols for ENP. The parameters are identified from individual scientific studies and from consensus reached in larger scale research projects and international organizations. A step-wise approach is proposed to develop tailored dispersion protocols for ecotoxicological and mammalian toxicological testing of ENP. The recommendations of this analysis may serve as a guide to researchers, companies, and regulators when selecting, developing, and evaluating the appropriateness of dispersion methods applied in mammalian and ecotoxicity testing. However, additional experimentation is needed to further document the protocol parameters and investigate to what extent different stock dispersion methods affect ecotoxicological and mammalian toxicological responses of ENP.

Adsorption and decomposition of hydrazine on Ru(001)

Abstract The adsorption and decomposition of hydrazine on Ru(001) have been investigated in the temperature range 150–1000 K utilizing HREELS, thermal desorption and reaction spectroscopy, LEED and ΔΦ measurements. N2H4 multilayers desorb in one peak at ≈ 190 K. After desorption of these multilayers, a chemisorption layer consisting mainly of molecular hydrazine remains. Decomposition of monolayer hydrazine starts approximately at 220 K. The thermal evolution of this reactive chemisorption layer has been investigated in detail. NN bond and NH bond scission proceed essentially in parallel, with the first being complete at lower T. In monolayer TPD, the desorption products N2, NH3 and H2, but not N2H4, are observed. In the course of the complex N2H4 thermal decomposition, several intermediate species can be identified in different temperature ranges, among them surface NH2 (220…280 K) and surface NH (280…≈480 K). The latter is the fast intermediate containing an NH bond. The final decomposition product on the surface is atomic N for T > 480 K which desorbs recombinatively between 570 and 1000 K. The decomposition routes and reaction mechanisms leading to these intermediate and final products are discussed.

Reference materials and representative test materials: the nanotechnology case

An increasing number of chemical, physical and biological tests are performed on manufactured nanomaterials for scientific and regulatory purposes. Existing test guidelines and measurement methods are not always directly applicable to or relevant for nanomaterials. Therefore, it is necessary to verify the use of the existing methods with nanomaterials, thereby identifying where modifications are needed, and where new methods need to be developed and validated. Efforts for verification, development and validation of methods as well as quality assurance of (routine) test results significantly benefit from the availability of suitable test and reference materials. This paper provides an overview of the existing types of reference materials and introduces a new class of test materials for which the term ‘representative test material’ is proposed. The three generic concepts of certified reference material, reference material(non-certified) and representative test material constitute a comprehensive system of benchmarks that can be used by all measurement and testing communities, regardless of their specific discipline. This paper illustrates this system with examples from the field of nanomaterials, including reference materials and representative test materials developed at the European Commission’s Joint Research Centre, in particular at the Institute for Reference Materials and Measurements (IRMM), and at the Institute for Health and Consumer Protection (IHCP).

pH-Dependent Immobilization of Proteins on Surfaces Functionalized by Plasma-Enhanced Chemical Vapor Deposition of Poly(acrylic acid)-and Poly(ethylene oxide)-like Films

The interaction of the proteins bovine serum albumin (BSA), lysozyme (Lys), lactoferrin (Lf), and fibronectin (Fn) with surfaces of protein-resistant poly(ethylene oxide) (PEO) and protein-adsorbing poly(acrylic acid) (PAA) fabricated by plasma-enhanced chemical vapor deposition has been studied with quartz crystal microbalance with dissipation monitoring (QCM-D). We focus on several parameters which are crucial for protein adsorption, i.e., the isoelectric point (pI) of the proteins, the pH of the solution, and the charge density of the sorbent surfaces, with the zeta-potential as a measure for the latter. The measurements reveal adsorption stages characterized by different segments in the plots of the dissipation vs frequency change. PEO remains protein-repellent for BSA, Lys, and Lf at pH 4-8.5, while weak adsorption of Fn was observed. On PAA, different stages of protein adsorption processes could be distinguished under most experimental conditions. BSA, Lys, Lf, and Fn generally exhibit a rapid initial adsorption phase on PAA, often followed by slower processes. The evaluation of the adsorption kinetics also reveals different adsorption stages, whereas the number of these stages does not always correspond to the structurally different phases as revealed by the D- f plots. The results presented here, together with information obtained in previous studies by other groups on the properties of these proteins and their interaction with surfaces, allow us to develop an adsorption scenario for each of these proteins, which takes into account electrostatic protein-surface and protein-protein interaction, but also the pH-dependent properties of the proteins, such as shape and exposure of specific domains.

Morphological transformation induced by multiwall carbon nanotubes on Balb/3T3 cell model as an in vitro end point of carcinogenic potential

Abstract In this work we investigated the toxicological effects of nude and chemically functionalised (-NH2, -OH and -COOH groups) multiwall carbon nanotubes (mwCNTs) using immortalised mouse fibroblasts cell line (Balb/3T3) as in vitro model, alternative to the use of animals, to assess basal cytotoxicity, carcinogenic potential, genotoxicity and cell interaction of nanomaterials (NM). Combining in vitro tests such as cell transformation assay and micronucleus with physicochemical and topological analysis, we obtained results showing no cytotoxicity and genotoxicity. Carcinogenic potential and mwCNTs interaction with cells were instead evident. We stressed the importance that different toxicological end points have to be considered when studying NM, therefore, assays able to detect long-term effects, such as carcinogenicity, must be taken into account together with a panel of tests able to detect more immediate effects like basal cytotoxicity or genotoxicity.

Elimination of biological contaminations from surfaces by plasma discharges: chemical sputtering.

Plasma treatment of surfaces as a sterilisation or decontamination method is a promising approach to overcome limitations of conventional techniques. The precise characterisation of the employed plasma discharges, the application of sensitive surface diagnostic methods and targeted experiments to separate the effects of different agents, have led to rapid progress in the understanding of different relevant elementary processes. This contribution provides an overview of the most relevant and recent results, which reveal the importance of chemical sputtering as one of the most important processes for the elimination of biological residuals. Selected studies on the interaction of plasmas with bacteria, proteins and polypeptides are highlighted, and investigations employing beams of atoms and ions confirming the prominent role of chemical sputtering are presented. With this knowledge, it is possible to optimize the plasma treatment for decontamination/sterilisation purposes in terms of discharge composition, density of active species and UV radiation intensity.