Hudson Zanin

Graphene and carbon nanotube nanocomposite for gene transfection

Graphene and carbon nanotube nanocomposite (GCN) was synthesised and applied in gene transfection of pIRES plasmid conjugated with green fluorescent protein (GFP) in NIH-3T3 and NG97 cell lines. The tips of the multi-walled carbon nanotubes (MWCNTs) were exfoliated by oxygen plasma etching, which is also known to attach oxygen content groups on the MWCNT surfaces, changing their hydrophobicity. The nanocomposite was characterised by high resolution scanning electron microscopy; energy-dispersive X-ray, Fourier transform infrared and Raman spectroscopies, as well as zeta potential and particle size analyses using dynamic light scattering. BET adsorption isotherms showed the GCN to have an effective surface area of 38.5m(2)/g. The GCN and pIRES plasmid conjugated with the GFP gene, forming π-stacking when dispersed in water by magnetic stirring, resulting in a helical wrap. The measured zeta potential confirmed that the plasmid was connected to the nanocomposite. The NIH-3T3 and NG97 cell lines could phagocytize this wrap. The gene transfection was characterised by fluorescent protein produced in the cells and pictured by fluorescent microscopy. Before application, we studied GCN cell viability in NIH-3T3 and NG97 line cells using both MTT and Neutral Red uptake assays. Our results suggest that GCN has moderate stability behaviour as colloid solution and has great potential as a gene carrier agent in non-viral based therapy, with low cytotoxicity and good transfection efficiency.

Fast preparation of nano-hydroxyapatite/superhydrophilic reduced graphene oxide composites for bioactive applications

A method for the direct electrodeposition of globular nano-hydroxyapatite (nHAp) onto reduced graphene oxide (RGO) is presented and a model for the specific growth preference is discussed. Results show that the carboxyl (carboxylic acid)/carboxylate functional groups attached directly to the RGO after oxygen plasma treatment were essential to accelerate the OH- formation and the deposition of globular nHAp crystals. High resolution scanning electron microscopy, energy dispersive X-ray and X-ray diffraction showed that homogeneous, highly crystalline, stoichiometric nHAp crystals, with preferential growth in the (002) plane direction, were formed without any thermal treatment. The nHAp/RGO composites were shown to be an appropriate surface for mesenchymal stem cell adhesion with active formation of membrane projections.

Effect of ultrasound irradiation on the production of nHAp/MWCNT nanocomposites

Large amounts of nanohydroxyapatite (nHAp)-multiwall carbon nanotube (MWCNT) nanocomposites are produced by two different aqueous precipitation methods. The ultrasonic irradiation (UI) and slow-drip addition under continuous magnetic stirring (DMS) methods were used to investigate the precipitation of nHAp acicular crystals. Calcium-nitrate, diammonium hydrogen phosphate, and ammonium hydroxide were used as precursor reagents. Superhydrophilic MWCNT were also employed. XPS analysis evidences that the functionalized MWCNTs are composed of 18 to 20 at.% of oxygen and that this property influences the nHAp formation. The high surface area of the MWCNT decreases the mean free path of ions, favoring the nHAp formation assisted by UI. The crystallinity was evaluated using the Scherrer equation. Semi-qualitative energy dispersive spectroscopy (EDS) analysis showed that the main components of HAp powders were calcium and phosphorus in the ratio Ca/P around of 1.67. Bioactivity properties of the nHAp/MWCNT-UI nanocomposites could be evaluated after 14 days soaking in simulated body fluid medium. Scanning electron microscopy, EDS, Fourier transform infrared attenuated total reflection spectroscopy, and X-ray diffraction techniques proved that the apatites formed on the surface and to points that the nHAp/MWCNT-UI have potential biological applications.

Fast preparation of free-standing nanohydroxyapatite–vertically aligned carbon nanotube scaffolds

We present a simple, low cost, and fast method to produce free-standing nanohydroxyapatite/carbon-based scaffolds. We electrodeposited nanohydroxyapatite onto vertically aligned carbon nanotube flakes and reticulated vitreous carbon bars. We prepared a highly crystalline and homogeneous thin film without any post-thermal treatment, and our results evidence that we can control the nanohydroxyapatite crystal formation according to the substrate employed. Immersion tests using simulated body fluid showed that these new nanobiomaterials had in vitro bioactivity. The free-standing nanohydroxyapatite/carbon-based scaffolds have been shown to be a suitable surface for mesenchymal stem cell adhesion with active formation of membrane projections and cell monolayer formation.

Absence of mutagenic and recombinagenic activity of multi-walled carbon nanotubes in the Drosophila wing-spot test and Allium cepa test

In order to assess the safety of the carbon nanotubes to human health and the environment, we investigated the potential toxicity and ability of multi-walled carbon nanotubes (NT), to induce DNA damage by employing the Allium cepa genotoxicity/mutagenicity test and the Somatic Mutation and Recombination Test (SMART) in the fruitfly, Drosophila melanogaster. The results demonstrated that NT did not significantly induce genotoxic or mutagenic effects in the Allium cepa test. All concentrations evaluated in the SMART assay showed survival rates higher than 90percent, indicating the absence of chronic toxicity for NT. Furthermore, the various treatments showed no significant increase in the NT mutation and recombination frequencies in mwh/flr(3) genotype compared to respective negative controls, demonstrating the absence of DNA damage caused by NT.

Carbon nanoparticles for gene transfection in eukaryotic cell lines

For the first time, oxygen terminated cellulose carbon nanoparticles (CCN) was synthesised and applied in gene transfection of pIRES plasmid. The CCN was prepared from catalytic of polyaniline by chemical vapour deposition techniques. This plasmid contains one gene that encodes the green fluorescent protein (GFP) in eukaryotic cells, making them fluorescent. This new nanomaterial and pIRES plasmid formed π-stacking when dispersed in water by magnetic stirring. The frequencies shift in zeta potential confirmed the plasmid strongly connects to the nanomaterial. In vitro tests found that this conjugation was phagocytised by NG97, NIH-3T3 and A549 cell lines making them fluorescent, which was visualised by fluorescent microscopy. Before the transfection test, we studied CCN in cell viability. Both MTT and Neutral Red uptake tests were carried out using NG97, NIH-3T3 and A549 cell lines. Further, we use metabolomics to verify if small amounts of nanomaterial would be enough to cause some cellular damage in NG97 cells. We showed two mechanisms of action by CCN-DNA complex, producing an exogenous protein by the transfected cell and metabolomic changes that contributed by better understanding of glioblastoma, being the major finding of this work. Our results suggested that this nanomaterial has great potential as a gene carrier agent in non-viral based therapy, with low cytotoxicity, good transfection efficiency, and low cell damage in small amounts of nanomaterials in metabolomic tests.

Electrochemical Performance of Porous Diamond-like Carbon Electrodes for Sensing Hormones, Neurotransmitters, and Endocrine Disruptors

Porous diamond-like carbon (DLC) electrodes have been prepared, and their electrochemical performance was explored. For electrode preparation, a thin DLC film was deposited onto a densely packed forest of highly porous, vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the carbon nanotubes to clump together to form a microstructured surface with an enlarged surface area. DLC:VACNT electrodes show fast charge transfer, which is promising for several electrochemical applications, including electroanalysis. DLC:VACNT electrodes were applied to the determination of targeted molecules such as dopamine (DA) and epinephrine (EP), which are neurotransmitters/hormones, and acetaminophen (AC), an endocrine disruptor. Using simple and low-cost techniques, such as cyclic voltammetry, analytical curves in the concentration range from 10 to 100 μmol L(-1) were obtained and excellent analytical parameters achieved, including high analytical sensitivity, good response stability, and low limits of detection of 2.9, 4.5, and 2.3 μmol L(-1) for DA, EP, and AC, respectively.

Graphene and carbon nanotube composite enabling a new prospective treatment for trichomoniasis disease

We report the synthesis and application of novel graphene oxide and carbon nanotube oxide (GCN-O) composite. First, pristine multi-walled carbon nanotube was prepared by chemical vapour deposition furnace and then exfoliated and oxidised simultaneously by oxygen plasma etching. The superficial and volumetric compositions of GCN-O were measured by XPS spectroscopy and EDX spectroscopy, respectively. Both XPS and EDX analyses evidence that the GCN-O is composed of up to 20% of oxygen atoms. As a result, GCN-O forms a stable colloidal aqueous solution and shows to have strong interaction with the cell membrane of Tritrichomonas foetus protozoa, making easy its application as a drug carrier. Trichomoniasis infection of cattle is a devastating disease for cattle producers, causing some damages to females and fetus, and the abortion is the most serious result of this disease. There is no effective treatment for trichomoniasis infection yet. Therefore, new treatment, especially one with no collateral effects in animals, is required. With this goal in mind, our results suggest that water dispersible composite is a novel nanomaterial, promising for Trichomoniasis infection treatment and as therapeutic delivery agent as well.

Freestanding Aligned Multi-walled Carbon Nanotubes for Supercapacitor Devices

We report on the synthesis and electrochemical properties of multi-walled carbon nanotubes (MWCNTs) for supercapacitor devices. Freestanding vertically-aligned MWCNTs and MWCNT powder were grown concomitantly in a one-step chemical vapour deposition process. Samples were characterized by scanning and transmission electron microscopies and Fourier transform infrared and Raman spectroscopies. At similar film thicknesses and surface areas, the freestanding MWCNT electrodes showed higher electrochemical capacitance and gravimetric specific energy and power than the randomly-packed nanoparticle-based electrodes. This suggests that more ordered electrode film architectures facilitate faster electron and ion transport during the charge–discharge processes. Energy storage and supply or supercapacitor devices made from these materials could bridge the gap between rechargeable batteries and conventional high-power electrostatic capacitors.

Promising electrochemical performance of high-surface-area boron-doped diamond/carbon nanotube electroanalytical sensors

Porous boron-doped diamond (p-BDD) electrodes of high-surface-area have been prepared on vertically aligned carbon nanotube substrates, and their electrochemical performance has demonstrated promising results for application in electroanalysis. The electrochemical features of the p-BDD electrodes were investigated and compared with those of a conventional flat BDD electrode (f-BDD). From cyclic voltammetry studies performed for the electrochemical probes [Fe(CN)6]3− and N,N,N′,N′-tetramethyl-para-phenylenediamine (TMPD), a fast charge transfer was observed at the p-BDD/electrolyte interface. For the [Fe(CN)6]3− redox probe, the heterogeneous electron-transfer rate constant (k0) value obtained for p-BDD was 10.9 times higher than that obtained using a f-BDD electrode. Moreover, the p-BDD electrodes also gave a smaller peak potential separation, ΔEp, and larger analytical signal magnitude for different biomolecules, such as dopamine (DA), acetaminophen (AC), and epinephrine (EP). These set of results demonstrated that the p-BDD electrode is a suitable candidate for applications in electroanalytical chemistry.