Hüseyin Alkan

Equilibrium and thermodynamic studies on biosorption of Pb(II) onto Candida albicans biomass.

Biosorption of Pb(II) ions from aqueous solutions was studied in a batch system by using Candida albicans. The optimum conditions of biosorption were determined by investigating the initial metal ion concentration, contact time, temperature, biosorbent dose and pH. The extent of metal ion removed increased with increasing contact time, initial metal ion concentration and temperature. Biosorption equilibrium time was observed in 30min. The Freundlich and Langmuir adsorption models were used for the mathematical description of biosorption equilibrium and isotherm constants were also evaluated. The maximum biosorption capacity of Pb(II) on C. albicans was determined as 828.50+/-1.05, 831.26+/-1.30 and 833.33+/-1.12mgg(-1), respectively, at different temperatures (25, 35 and 45 degrees C). Biosorption showed pseudo second-order rate kinetics at different initial concentration of Pb(II) and different temperatures. The activation energy of the biosorption (Ea) was estimated as 59.04kJmol(-1) from Arrhenius equation. Using the equilibrium constant value obtained at different temperatures, the thermodynamic properties of the biosorption (DeltaG degrees , DeltaH degrees and DeltaS degrees ) were also determined. The results showed that biosorption of Pb(II) ions on C. albicans were endothermic and spontaneous. The optimum initial pH for Pb(II) was determined as pH 5.0. FTIR spectral analysis of Pb(II) adsorbed and unadsorbed C. albicans biomass was also discussed.

Production of Lipase by a Newly Isolated Bacillus coagulans Under Solid-State Fermentation Using Melon Wastes

SummaryAn extracellular lipase was produced by Bacillus coagulans by solid-state fermentation. Solid waste from melon was used as the basic nutrient source and was supplemented with olive oil. The highest lipase production (78,069 U/g) was achieved after 24h of cultivation with 1% olive oil enrichment. Enzyme had an optimal activity at 37°C and pH 7.0, and sodium dodecyl sulfate increased lipase activity. NH 4NO3 increased enzyme production, whereas organic nitrogen had no effect. The effect of the type of carbon sources on lipolytic enzyme production was also studied. The best results were obtained with starch and maltose (148,932 and 141,629 U/g, respectively), whereas a rather low enzyme activity was found in cultures grown on glucose and galactose (approx 118,769 and 123,622 U/g, respectively). Enzyme was inhibited with Mn+2 and Ni+2 by 68 and 74%, respectively. By contrast, Ca+2 enhanced enzyme production by 5%.

Production of Extracellular Alkaline α‐Amylase by Solid State Fermentation with a Newly Isolated Bacillus sp.

Abstract Production of alkaline α‐amylase employing our laboratory isolate, Bacillus sp., under solid state fermentation, was optimized. The effect of wheat bran and lentil husk was examined. Lentil husk exhibited the highest enzyme production. The appropriate incubation time, inoculum size, moisture level, and buffer solution level were determined. Maximum yields of 216,000 and 172,800 U/g were achieved by employing lentil husk and wheat bran as substrates in 0.1 M carbonate/bicarbonate buffer at pH 10.0 with 30% initial moisture level at 24 h. Inoculum size and buffer solution level were found to be 20% and 1:0.5 for two solid substrates.

Adsorption of Ni(II) from aqueous solution by Bacillus subtilis

Abstract This work reports the application of Bacillus subtilis as adsorbent for the removal of Ni(II) from aqueous solution. Batch experiments were conducted to study the effects of several parameters such as, contact time, initial concentration of adsorbate (25–200 mg L−1), temperature (298–318 K), and adsorbent dose (0.05–0.4 g) on Ni(II) adsorption. Equilibrium adsorption isotherms and kinetics were also investigated. The equilibrium experimental data were analyzed by Freundlich and Langmuir models. The kinetic data obtained with different initial concentration and temperature were analyzed using a pseudo-first-order, pseudo-second-order, and intraparticle diffusion equations. The results showed that this novel adsorbent had a high adsorption capacity, making it suitable for use in the treatment of Ni(II)-enriched wastewater.

Cu2+-attached pumice particles embedded composite cryogels for protein purification.

Abstract In this study, chromatographic performance of Cu2+-attached pumice particles embedded to monolithic cryogels (Cu2+-APPsEMC) for human serum albumin (HSA) was investigated. Monolithic composite cryogels were prepared by means of polymerization of gel-forming precursors at sub-zero temperatures. The chemical composition of pumice and surface of composite cryogels were determined by X-ray fluorescence spectrometer and scanning electron microscopy, respectively. The highest adsorption capacity (549.5 mg/g pumice) of cryogels was achieved at phosphate buffer of pH 8.0 with initial HSA solution of 3 mg/ml. SDS-PAGE analysis was performed for the samples studied on human serum to determine HSA adsorption/desorption performance of cryogel qualitatively.

Molecularly imprinted cryogel as a pH-responsive delivery system for doxorubicin

ABSTRACT In this study, implantable and degradable molecularly imprinted cryogel was prepared for pH-responsive delivery of doxorubicin. Cryogel discs were synthesized using amino acid-based functional monomer with HEMA and gelatin. The molecularly imprinted discs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, degradation and swelling tests. In vitro delivery experiments were carried out in order to examine the effects of medium pH and drug content. The degree of degradation of composite cryogels was found to be 83.45±1.86% after 56 days. The release profiles of DOX from molecularly imprinted cryogel discs exhibit a biphasic delivery. It was observed that an initial burst release step from 0 to 12 h was followed by a slower and sustained release. Release rate of DOX from cryogel discs increased in more acidic conditions. Kinetic studies showed that a combination of diffusion and erosion control is mainly responsible from the general release behaviors of molecularly imprinted cryogel discs.