Hwi Jin Ko

Cell-based olfactory biosensor using microfabricated planar electrode

The initial event in olfactory perception is the binding of odorant molecules to specific receptor proteins in the human nose. The interaction between odorant and receptor initiates olfactory signal transduction that leads to a cation influx and change in the membrane potential of the olfactory sensory neuron. In this study, a microfabricated planar electrode was used to measure the generated membrane potential in a heterologous olfactory system. Human embryonic kidney (HEK)-293 cells expressing the olfactory receptor I7 were transfected with the gustatory cyclic nucleotide gated (CNG) channel to amplify the membrane potential. A microfabricated planar electrode was used to measure the electrical responses of odorant-receptor binding. Stimulation of the olfactory receptor with its specific odorant caused an intracellular Ca(2+) influx, which was quantitatively measured using a planar electrode. The extracellular field potential generated by the Ca(2+) influx through the CNGgust channel of the cells was approximately 10 mV. This cell-based olfactory biosensor, which uses a microfabricated planar electrode for detection, would be useful for screening specific ligands for binding to orphan olfactory receptors.

Real-time monitoring of odorant-induced cellular reactions using surface plasmon resonance

Surface plasmon resonance (SPR) is a powerful technique for measuring molecular interaction in real-time. SPR can be used to detect molecule to cell interactions as well as molecule to molecule interactions. In this study, the SPR-based biosensing technique was applied to real-time monitoring of odorant-induced cellular reactions. An olfactory receptor, OR I7, was fused with a rho-tag import sequence at the N-terminus of OR I7, and expressed on the surface of human embryonic kidney (HEK)-293 cells. These cells were then immobilized on a SPR sensor chip. The intensity of the SPR response was linearly dependent on the amount of injected odorant. Among all the aldehyde containing odorants tested, the SPR response was specifically high for octanal, which is the known cognate odorant for the OR I7. This SPR response is believed to have resulted from intracellular signaling triggered by the binding of odorant molecules to the olfactory receptors expressed on the cell surface. This SPR system combined with olfactory receptor-expressed cells provides a new olfactory biosensor system for selective and quantitative detection of volatile compounds.

Nanovesicle-Based Bioelectronic Nose for the Diagnosis of Lung Cancer from Human Blood

A human nose-mimetic diagnosis system that can distinguish the odor of a lung cancer biomarker, heptanal, from human blood is presented. Selective recognition of the biomarker is mimicked in the human olfactory system. A specific olfactory receptor recognizing the chemical biomarker is first selected through screening a library of human olfactory receptors (hORs). The selected hOR is expressed on the membrane of human embryonic kidney (HEK)-293 cells. Nanovesicles containing the hOR on the membrane are produced from these cells, and are then used for the functionalization of single-walled carbon nanotubes. This strategy allows the development of a sensitive and selective nanovesicle-based bioelectronic nose (NvBN). The NvBN is able to selectively detect heptanal at a concentration as low as 1 × 10(-14) m, a sufficient level to distinguish the blood of a lung cancer patient from the blood of a healthy person. In actual experiments, NvBN could detect an extremely small increase in the amount of heptanal from human blood plasma without any pretreatment processes. This result offers a rapid and easy method to analyze chemical biomarkers from human blood in real-time and to diagnose lung cancer.

Real-time monitoring of geosmin and 2-methylisoborneol, representative odor compounds in water pollution using bioelectronic nose with human-like performance.

A bioelectronic nose for the real-time assessment of water quality was constructed with human olfactory receptor (hOR) and single-walled carbon nanotube field-effect transistor (swCNT-FET). Geosmin (GSM) and 2-methylisoborneol (MIB), mainly produced by bacteria, are representative odor compounds and also indicators of contamination in the water supply system. For the screening of hORs which respond to these compounds, we performed CRE-luciferase assays of the two odorants in heterologous cell system. Human OR51S1 for GSM and OR3A4 for MIB were selected, and nanovesicles expressing the hORs on surface were produced from HEK-293 cell. Carbon nanotube field-effect transistor was functionalized with the nanovesicles. The bioelectronic nose was able to selectively detect GSM and MIB at concentrations as low as a 10 ng L(-1). Furthermore, detection of these compounds from the real samples such as tap water, bottled water and river water was available without any pretreatment processes.

Cell-based high-throughput odorant screening system through visualization on a microwell array.

The development of a cell-based high-throughput screening system has attracted much attention from researchers who study drug screening mechanisms and characterization of G-protein coupled receptors (GPCRs). Although olfactory receptors (ORs) constitute the largest group of GPCRs that play a critical role recognizing and discriminating odorants, only a few ORs have been characterized, and most remain orphan. The conventional cell-based assay system for characterizing GPCRs, including ORs, is very laborious, time consuming, and requires an expensive assay system. In this study, we developed a simple, low-cost miniaturized odorant screening method by combining Micro-Electro-Mechanical system (MEMs) technique and visualization technique for detecting an odorant response. We fabricated PEG microwell from a photocrosslinkable polyethylene glycol diacrylate (PEGDA) solution and applied it to cell culture and a reverse transfection platform for cell-based high-throughput screening. For the first time, the olfactory receptors were expressed on the microwell platform using reverse transfection technique. The various olfactory receptors can be expressed simultaneously using this technique and the microwell spotted with olfactory receptor genes can be used as a high-throughput screening platform. The odorant response was detected via fluorescence analysis on the microwell using a cAMP response element (CRE) reporter assay. We tested this platform using four de-orphaned ORs. This new cell-based screening method not only reduced numerous time-consuming steps but also allowed for simple, efficient, and quantitative screening and patterning of large numbers of GPCRs including ORs, which can help to visualize the OR response to odorants on a microwell.

Specificity of odorant-binding proteins: a factor influencing the sensitivity of olfactory receptor-based biosensors

Odorant-binding proteins (OBPs) primarily function in the transport of hydrophobic odorants. In this study, OBPs originating from rat and pig were cloned into a mammalian expression vector, pcDNA3, and expressed in HEK-293 cells, and their specificity for odorants and olfactory receptors was examined. Results suggest that OBPs have a high affinity for the olfactory receptors when both the OBP and receptor originate from the same species. The rat OBPs were bound not only to the rat olfactory receptor I7 but also to the odorant specific to I7. The solubility of the odorant was increased by both OBP2 and OBP3, which originate from rat, but with different efficiencies. These results demonstrate that OBPs specifically interact with odorants as well as olfactory receptors, and these interactions can influence the sensitivity of olfactory receptor-based biosensors.

A portable and multiplexed bioelectronic sensor using human olfactory and taste receptors

A multiplexed bioelectronic sensor was developed for the purpose of rapid, on-site, and simultaneous detection of various target molecules. Olfactory and taste receptors were produced in Escherichia coli, and the reconstituted receptors were immobilized onto a multi-channel type carbon nanotube field-effect transistor. This device mimicked the human olfactory/taste system and simultaneously measured the conductance changes with high sensitivity and selectivity following treatment with various odor and taste molecules commonly known to be indicators of food contamination. Various pattern recognition of odorants and tastants was available with a customized platform for the simultaneous measurement of electrical signals. The simple portable bioelectronic device was suitable for efficient monitoring of food freshness and is expected to be used as a rapid on-site sensing platform with various applications.

Bioelectronic Nose: An Emerging Tool for Odor Standardization

Odors are perceived differently as a function of individual human experience, and communicating about odors between individuals is therefore very difficult. There is a need to classify and standardize odors, but appropriate tools have not yet been developed. A bioelectronic nose mimics human olfaction and detects target molecules with high sensitivity and selectivity. This new tool has great potential in many applications and is expected to accelerate odor classification and standardization. In particular, a multiplexed bioelectronic nose can provide complex odor information using pattern recognition techniques, and could even reproduce odors via an integrated olfactory display system. We expect that a bioelectronic nose will be a useful tool for odor standardization by providing codes for odors that enable us to communicate odor information.

Coupling of olfactory receptor and ion channel for rapid and sensitive visualization of odorant response

In the human smell sensing system, there are about 390 kinds of olfactory receptors (ORs) which bind to various odorants with different affinities and specificities. Characterization and odorant binding pattern analysis of the ORs are essential for understanding of human olfaction and to mimic the olfactory system in various applications. Although various cell-based odorant screening systems have been developed for this purpose, many human ORs (hORs) still remain orphan because of the time-consuming and labor-intensive experimental procedures of the available screening methods. In this study, we constructed an ion channel-coupled hOR for simple odorant detection by rapidly visualizing the odorant response to overcome the limitations of conventional screening systems. The hORs were coupled to the Kir6.2 potassium channel and the fusion proteins were expressed in HEK293 cells. In this system, when an odorant binds to the hORs coupled to the ion channel, a conformational change in the OR occurs, which consequently opens the ion channel to result in ion influx into the cell. This ion influx was then visualized using a membrane potential dye. Cells expressing ion channel-coupled hORs showed high sensitivity and selectivity to their specific odorants, and the odorant-hOR binding pattern was visualized to identify the response of individual hORs to various odorants, as well as the response of various hORs to various odorants. These results indicate that the ion channel-coupled hOR system can be effectively used not only for simple and fast high-throughput odorant screening, but also to visualize the odorant-hOR response pattern.

Recent Update of Nanobiosensors Using Olfactory Sensing Elements andNanomaterials

Various biomaterials such as antibody, aptamer, enzyme, DNA and sensory receptor can be used for recognizing ligands by nanobiosensor. Especially, olfactory sensing elements with olfactory receptor are most promising one to develop the nanobiosensor with high performance because they can discriminate target molecules with high selectivity and also detect numerous odorant molecules, for example over ten thousands of odorants at very low concentration can be detected by human nose. There have been increasing many efforts to develop the nanobiosensor using various olfactory sensing elements. Recently, several olfactory sensing elements were integrated with nanomaterials, which greatly improve the sensitivity of the nanobiosensor, to enhance the performance of nanobiosenor. In this paper, olfactory sensing elements were briefly introduced for the development of the nanobiosensor with high performance.