Hyun Hee Ahn

In Vivo Osteogenic Differentiation of Human Adipose-Derived Stem Cells in an Injectable In Situ–Forming Gel Scaffold

The sol-to-gel transition occurring at around body temperature makes the MPEG-PCL diblock copolymer an ideal candidate material for use as an injectable in situ-forming gel containing human adipose tissue-derived stem cells (hADSCs). The sol can be prepared at room temperature, and the gel forms at body temperature. Solutions of the copolymer containing hADSCs and osteogenic factors injected into rats formed gel scaffolds at the injection sites. The gels thus formed showed the interconnective pore structure required to support growth, proliferation, and differentiation of hADSCs. Bromodeoxyuridine-labeled hADSCs were confirmed to be present in gels formed in vivo. Bone formation was observed only in gel implants containing both hADSCs and osteogenic factors. Subcutaneous implantation of the in situ-forming gel scaffold demonstrated that hADSCs embedded in the gel stimulated much lower host tissue responses than did the gel alone, probably because of the unique immunomodulatory properties of hADSCs. In conclusion, our data on hADSCs embedded in an in situ gel scaffold suggest that this formulation may provide numerous benefits as a noninvasive alternative for tissue-engineered bone formation.

Polyethyleneimine-mediated gene delivery into human adipose derived stem cells.

In this study, we examined the use of polyethyleneimine (PEI) as a carrier for gene delivery in human adipose tissue-derived stem cells (hADSCs). These multipotent cells can form bone, cartilage, adipose, and other connective tissues. In primary culture, hADSCs are fibroblastic in appearance in primary culture, and they show a high rate of proliferation for at least five passages. Immunophenotyping showed that these cells are positive for the mesenchymal stem cell markers CD29 and CD44 but negative for the hematopoietic cell surface markers CD34, CD45, and c-kit. PEI and Lipofectamine were compared as gene carriers for hADSCs. DNA completely bound PEI at a negative-to-positive (N/P) charge ratio of 4. The PEI-DNA complexes were spherical with smooth surfaces. As the proportion of PEI was increased, the size of the PEI-DNA complexes decreased from 990 to 130nm, the positive surface charge decreased, and the cytotoxicity increased. Flow cytometry revealed that the transfection efficiency using PEI at N/P charge ratios of 4 and 8 was higher than that of Lipofectamine. The highest transfection efficiency (19%) was obtained at an N/P charge ratio of 8. After transfection, the enhanced green fluorescent protein (EGFP) started to localize in the nuclei of hADSCs at 4h 30m and localize over cytoplasm from 9h 30m. In conclusion, PEI acts as an effective gene carrier for hADSCs.

The osteogenic differentiation of rat muscle-derived stem cells in vivo within in situ-forming chitosan scaffolds.

We herein examined the bone formation from rat muscle-derived stem cells (rMDSCs) using an injectable in situ-forming chitosan gel in vivo. The rMDSCs were easily isolated from rat muscle tissue. The osteogenic factors caused differentiation of rMDSCs toward the osteogenic lineage. The rMDSCs survived well on the scaffold created by the in vitro and in vivo in situ-forming chitosan gel, indicating that in situ gel-forming chitosan was a suitable substrate for the attachment and proliferation of rMDSCs. Bone formation was observed only in chitosan gel containing both rMDSCs and osteogenic factors. Subcutaneous implantation of the in situ-forming chitosan gel demonstrated that rMDSCs-containing chitosan gel induced much lower host tissue responses than did the chitosan gel alone, probably due to the immunosuppression of the transplanted rMDSCs.

Cellular Behavior of Human Adipose-Derived Stem Cells on Wettable Gradient Polyethylene Surfaces

Appropriate surface wettability and roughness of biomaterials is an important factor in cell attachment and proliferation. In this study, we investigated the correlation between surface wettability and roughness, and biological response in human adipose-derived stem cells (hADSCs). We prepared wettable and rough gradient polyethylene (PE) surfaces by increasing the power of a radio frequency corona discharge apparatus with knife-type electrodes over a moving sample bed. The PE changed gradually from hydrophobic and smooth surfaces to hydrophilic (water contact angle, 90º to ~50º) and rough (80 to ~120 nm) surfaces as the power increased. We found that hADSCs adhered better to highly hydrophilic and rough surfaces and showed broadly stretched morphology compared with that on hydrophobic and smooth surfaces. The proliferation of hADSCs on hydrophilic and rough surfaces was also higher than that on hydrophobic and smooth surfaces. Furthermore, integrin beta 1 gene expression, an indicator of attachment, and heat shock protein 70 gene expression were high on hydrophobic and smooth surfaces. These results indicate that the cellular behavior of hADSCs on gradient surface depends on surface properties, wettability and roughness.

Polyethyleneimine‐mediated gene delivery into rat pheochromocytoma PC‐12 cells

In this study, we examined the use of polyethyleneimine (PEI) as a non‐viral gene carrier and lipofectamine™ 2000 as control for rat pheochromocytoma PC‐12 cells. The complex formation of PEI and DNA or lipofectamine and DNA was characterized by gel electrophoresis and measurement of particle size and surface charge. A gradual increase in surface charge (from 0.7 to 43 mV) and a gradual decrease in particle size (from 900 to 130 nm) was observed in the PEI–DNA complex with higher PEI concentrations. The cytotoxicity of PC‐12 cells for lipofectamine–DNA complex was similar to PEI–DNA complex at N:P charge ratios of 4 and 8. Transfection efficiency was 14% for lipofectamine and 15% for PEI. At low N:P ratio, DNA condenses poorly, so the particle size tends to be large and polydispersed, resulting in poor transfection efficiency. Meanwhile, a high N:P ratio results in high transfection efficiency and cytotoxicity. Transfected PC‐12 cells showed the generation of neurites from transfected PC‐12 cells in the presence of NGF, indicating the differentiation of PC‐12 cells. NGF‐differentiated PC‐12 cells were transfected by PEI–DNA complex of N:P charge ratio 8. From real‐time imaging for transfection, the enhanced green fluorescent protein (EGFP) started to localize in the nuclei of PC‐12 cells at 5 h and localized in the cytoplasm from 15 h. Our study demonstrates that PEI or lipofectamine may be applied as an effective gene carrier for PC‐12 cells. Copyright

Induction of neurogenesis in rat bone marrow mesenchymal stem cells using purine structure-based compounds

Rat bone marrow stem cells (rBMSCs) in the presence of chemical molecules were differentiated into neurons.

Release Profile of BSA or BDNF from Temperature Sensitive Hydrogels

Methoxy poly(ethylene glycol) (MPEG)-b-poly(ε-caprolactone) (PCL) diblock copolymer was synthesized by ring-opening of ε-caprolactone (ε-CL) in the presence of a monomer activator with the terminal alcohol of MPEG as an initiator. The temperature sensitive behavior of the prepared MPEG-PCL diblock copolymer solution was examined. The polymer solution formed translucent sol at the room temperature. As the temperature increased from room temperature, the sol became gel, indicating that the diblock copolymer solution at room temperature can form gel at body temperature. Brain-derived neurotrophic factor (BDNF) loaded MPEG-PCL diblock copolymer solution and Pluronic solution for comparison were prepared to examine the release behavior of BDNF. Pluronic gel exhibited nearly complete release of BDNF even at 2 day, while the release of BDNF in MPEG-PCL gel showed the prolonged release profile for 21 days. In this study, we confirmed that thermosensitive MPEG-PCL diblock copolymer in this work could utilize as a potential carrier of BDNF.

Preparation and Release Profile of BDNF-Loaded PLGA/SIS Scaffold

The goal of this study was to investigate release tendency of brain-derived neurotrophic factor (BDNF) from poly(L-lactide-co-glycolide) (PLGA) and small intestine submucosa (SIS) scaffold prepared by ice-leaching method. A porous scaffold consisting of PLGA and SIS as carrier of BDNF has been prepared in the presence of ice particle. SEM image of the PLGA/SIS scaffold showed an interconnected pore structure. The release behavior of BDNF loaded PLGA/SIS scaffold was examined for 4 weeks period at phosphate buffered saline (PBS, pH 7.4) at 37 oC. The sustained release of BDNF over 4 weeks was observed from the PLGA/SIS scaffold. These results indicate that the sustained release of BDNF from PLGA/SIS scaffold can be very useful for application in the tissue engineering.