Hyunhoon Choi

Residual Drift Response of SMRFs and BRB Frames in Steel Buildings Designed according to ASCE 7-05

A recent study has shown that residual drifts after earthquakes that are greater than 0.5% in buildings may represent a complete loss of the structure from an economic perspective. To study the comparative residual drift response of special moment-resisting frames (SMRFs) and buckling-restrained braced (BRB) frames, buildings between 2 and 12 stories in height are designed according to ASCE 7-05 and investigated numerically. This investigation includes pushover analyses as well as two-dimensional nonlinear time-history analyses for two ground motion hazard levels. The two systems show similar peak drifts and drift concentration factors. The BRB frames experience larger residual drifts than the SMRFs; however, the scatter in the residual drift results is large. Expressions are proposed to estimate the residual drifts of these systems as a function of the expected peak drifts, the initial recoverable elastic drift, and the drift concentration factor of each system. When subjected to a second identical earth...

PERFORMANCE-BASED DESIGN OF ADDED VISCOUS DAMPERS USING CAPACITY SPECTRUM METHOD

The conventional practice of carrying out a series of trial and error process for design of supplemental dampers requires a lot of computation time and labour. In this study a straightforward design procedure for viscous dampers was developed based on capacity spectrum method in the context of performance based seismic design. The required amount of viscous damping to satisfy given performance acceptance criteria was evaluated from the difference between the overall demand for effective damping and the inherent damping plus the equivalent damping capacity of the structure originated from plastic deformation of each structural member. The proposed method was applied to single-degree-of-freedom systems with various design parameters such as natural period, yield strength, and the stiffness after the first yield. The procedure was also implemented to 10- and 20-storey steel frames for verification of the proposed method. According to the earthquake time history analysis results, the maximum displacements of the model structures with viscous dampers supplied in accordance with the proposed method correspond well with the given target displacements.

New installation scheme for viscoelastic dampers using cables

Passive energy dissipation devices, such as, viscous, viscoelastic, and friction devices are generally installed in buildings using diagonal or chevron braces. To increase the effective damping force and to reduce the damper volume, various magnifying system of the damper displacement, such as, toggle brace system and scissor-jack-damper configuration have been developed with increase in installation cost. In this study, new installation scheme for passive dampers was proposed using cables installed in such a way that relative displacement equal to storey displacement occurs between the cable and the structure when the structure is subjected to lateral load. The cables can be installed continuously or discretely between base and top storey of the structure. To verify the validity of the proposed method nonlinear dynamic analysis of model structures with viscoelastic dampers installed using the proposed configuration scheme was carried out using three earthquake records and two sinusoidal forces. According...

Inelastic Seismic Response of Asymmetric-Plan Self-Centering Energy Dissipative Braced Frames

A self-centering energy-dissipative(SCED) bracing system has recently been developed as a new seismic force resistant bracing system. The advantage of the SCED brace system is that, unlike other comparable advanced bracing systems that dissipate energy such as the buckling restrained brace(BRB) system, it has a self-centering capability that reduces or eliminates residual building deformations after major seismic events. In order to investigate the effects of torsion on the SCED brace and BRB systems, nonlinear time history analyses were used to compare the responses of 3D model structures with three different amounts of frame eccentricity. The results of the analysis showed that the interstory drifts of SCED braced frames are more uniform than those of BRB frames, without regard to irregularity. The residual drift and residual rotation responses tended to decrease as irregularity increased. For medium-rise structures, the drift concentration factors(DCFs) for SCED systems were lower than those for BRB frames. This means that SCED-braced frames deform in a more uniform manner with respect to building height. The effect of the torsional irregularity on the magnitude of the DCFs was small.

Seismic Energy Demand of Buckling‐Restrained Braced Frames

In this study seismic analyses of steel structures were carried out to examine the effect of ground motion characteristics and structural properties on energy demands using 60 earthquake ground motions recorded in different soil conditions, and the results were compared with those of previous works. Analysis results show that ductility ratios and the site conditions have significant influence on input energy. The ratio of hysteretic to input energy is considerably influenced by the ductility ratio and the strong motion duration. It is also observed that as the predominant periods of the input energy spectra are significantly larger than those of acceleration response spectra used in the strength design, the strength demand on a structure designed based on energy should be checked especially in short period structures. For that reason framed structures with buckling-restrained-braces (BRBs) were designed in such a way that all the input energy was dissipated by the hysteretic energy of the BRBs, and the results were compared with those designed by conventional strength-based design procedure.

Seismic Energy Demand of Structures Depending on Ground Motion Characteristics and Structural Properties

The energy-based seismic design method Is more rational in comparison with current seismic design code in that it can directly account for the effects of cumulative damage by earthquake and hysteretic behavior of the structure. However there are research results that don`t reach a consensus depending on the ground motion characteristic and structural properties. For that reason in this study the influences of ground motion characteristics and structural properties on energy demands were evaluated using 100 earthquake ground motions recorded in different soil conditions, and the results obtained were compared with those of previous works. Results show that ductility ratios and sue conditions have significant influence on input energy. The results show that the ratio of hysteretic to input energy is considerably influenced by the ductility ratio, damping ratio, and strong motion duration, while the effect of site condition is insignificant.