I. A. Chelnokova

Simultaneous voltammetric determination of dopamine and ascorbic acid at an electrode modified with the gold-palladium binary system

The catalytic activities of gold, palladium, and rhodium particles and their binary systems electrodeposited on the surface of a glassy-carbon electrode in the oxidation of dopamine and ascorbic acid are compared. As compared to individual noble metals, the Au-Pd binary system exhibits a higher catalytic activity that manifests itself in a multiple increase in the oxidation current of the mediator and in a decrease in the oxidation potential of the substrate. It is found that dopamine and ascorbic acid can be simultaneously determined by voltammetry at an electrode modified with the Au-Pd binary system. The catalytic currents of substrate oxidation are linear functions of the concentrations in the ranges from (1 × 10−3 to 1 × 10−7) M for dopamine and from (5 × 10−3 to 1 × 10−6) M for ascorbic acid.

Electrocatalytic oxidation and flow-injection determination of ascorbic acid at a graphite electrode modified with a polyaniline film containing electrodeposited palladium

A method for forming a composite film on the surface of a graphite electrode is proposed. Conditions for detecting the maximum catalytic current under batch and flow conditions are determined. A procedure for the electrocatalytic determination of ascorbic acid at the graphite electrode modified with a polyaniline film containing palladium particles is proposed. The catalytic effect of this electrode manifests itself by a ∼300-mV decrease in the peak potential of ascorbic acid oxidation and by a multiple increase in the peak current of ascorbic acid oxidation as compared to the unmodified electrode. The linear dependence of the electrocatalytic response of the composite electrode on the concentration of ascorbic acid is observed down to 1 × 10−8 M and 2.5 nmol of ascorbic acid under batch and flow-injection analysis conditions, respectively.

Electrooxidation of oxalic acid at a carbon-paste electrode with deposited palladium nanoparticles

Palladium nanoparticles deposited on the surface of a carbon-paste electrode exhibit electrocatalytic activity in the oxidation of oxalic acid. The surface topography of modified carbon-paste electrodes (CPEs) and the shapes of the metal crystallite particles were studied with atomic-force microscopy. These data were correlated with the voltammetric parameters of the electrooxidation of palladium and oxalic acid. As the dispersity of palladium nanoparticles electrodeposited on the CPE surface increased and their size diminished, the peak current of the catalytic oxidation of oxalic acid decreased, whereas the increment of this current increased as compared to the limiting current of metal oxidation. Evidently, this was due to an increase in the catalytic activity of the metal. The use of CPE modified with palladium nanoparticles instead of CPE containing palladium macrocrystals lowered the detection limit for the analyte by one order of magnitude (down to 2 × 10−5 M).

Joint voltammetric determination of dopamine and uric acid

Electrocatalytic activities of gold particles deposited onto an electrode unmodified and modified with a self-organized monolayer of cystamine in oxidation of dopamine and uric acid were compared. The possibility of joint determination of dopamine and uric acid on an electrode modified with self-organized monolayer of cystamine with gold nanoparticles was examined.

Voltammetry determination of dopamine by the electrocatalytic response of an electrode modified by a polyaniline film with an inclusion of copper(II) tetrasulfophthalocyanine

A polyaniline composite film with an inclusion of copper(II) tetrasulfophthalocyanine, applied on a glassy-carbon electrode (GC) has demonstrated a mediatory activity in the oxidation of dopamine in acidic and neutral media. The conditions for the formation of a polymer film on the surface of a glassy-carbon electrode for registering the maximum electrocatalytic effect in the oxidation of dopamine are found. A method of voltammetric and amperometric detection of dopamine on the composite film electrode under static and flow conditions is proposed. The use of a polyaniline composite with an inclusion of copper(II) tetrasulfophthalocyanine, coated with a Nafion film, made possible the reduction of the detection limit for dopamine to 1 × 10−8 M under static conditions and to 5.0 nmol under the conditions of flow-injection analysis.

Selective voltammetric and flow-injection determination of guanine and adenine on a glassy carbon electrode modified by a ruthenium hexachloroplatinate film

An inorganic film of ruthenium hexachloroplatinate (RuPtCl6), deposited on the surface of a glassy carbon electrode, exhibits electrocatalytic activity in the oxidation of purine bases, such as adenine and guanine. Appropriate working conditions are found for fabricating a polymer film on the surface of glassy carbon and for recording the maximum electrocatalytic effect for the modified electrode. A method is developed for the selective voltammetric determination of guanine and adenine in their simultaneous presence on an electrode modified by a RuPtCl6 film. A procedure is proposed for the amperometric detection of purine bases with this modified electrode under the conditions of flow-injection analysis. The dependence of the analytical signal on the concentration of guanine and adenine is linear up to 5 × 10−6 and 5 × 10−7 M in the stationary mode and to 5 × 10−7 and 5 × 10−8 M under flow conditions, respectively. The proposed method was tested in the analysis of calf thymus DNA for the concentrations of guanine and adenine.

Electrochemical behavior and voltammetric determination of cysteine and cystine at carbon-paste electrodes modified with metal phthalocyanines

The electrochemical behavior of cysteine and cystine on carbon-paste electrodes modified with Fe(II), Co(II), Ni(II), and Cu(II) phthalocyanines is studied. Metal phthalocyanines exhibit catalytic activity in the electrooxidation of cysteine and cystine and in the reduction of cystine. The best catalyst is the cobalt complex. In the electrooxidation of cysteine, the catalysts are electrogenerated complex species of Co(II)Pc or Co(III)Pc+, and in the oxidation of cystine, oxidized or reduced forms of the coordinated ligand. Various versions of the determination of cysteine and cystine by the electrocatalytic reactions on the modified electrodes are proposed.

Electrocatalytic oxidation and flow-injection determination of sulfur amino acids on a glassy carbon electrode modified by a nickel(II) polytetrasulfophthalocyanine film

The electrochemical oxidation of sulfur amino acids, i.e., cysteine, cystine, and methionine, is studied on a glassy carbon electrode modified by a film of nickel(II) polytetrasulfophthalocyanine (poly-NiTsPc). Poly-NiTsPc demonstrates a selective mediator activity in the oxidation of sulfur amino acids, depending on the pH of solution. The proper conditions for fabricating a polymer film on the surface of glassy carbon are found and the conditions of registering the maximal electrocatalytic effect on the modified electrode are determined. A procedure is proposed for the voltammetric determination and amperometric detection of cysteine, cystine, and methionine on an electrode coated by a poly-NiTsPc film under the conditions of flow-injection analysis (FIA). The linear relation of the electrocatalytic response of a composite electrode to amino acid concentration is observed to the level n × 10−6 M in the static mode and n × 10−9 M under FIA conditions.

Voltammetric Determination of Acyclovir in Drugs Using an Electrode Modified by Ruthenium Hexachloroplatinate or Hexacyanocobaltate Film

A voltammetric method for determining acyclovir using a chemically modified electrode with catalytic properties was developed. The catalytic properties for acyclovir oxidation of glassy-carbon electrodes modified by inorganic films of Ru(III) hexachloroplatinate or hexacyanocobaltate were compared. The catalytic effect was manifested as a decreased potential and multiply increased oxidation current at the proposed film electrodes. The greatest catalytic effect was observed using an electrode with a film of Ru(III) hexachloroplatinate. The catalytic current depended linearly on the analyte concentration in the range from 0.5 μM to 5 mM. The proposed method was used to determine acyclovir in drugs.

Electrocatalytic Response of a Glassy-Carbon Electrode Modified with a Polyvinylpyridine Film with Electrodeposited Palladium in the Oxidation of Oxalic Acid

The electrochemical properties of a glassy-carbon electrode modified with a polyvinylpyridine film with electrodeposited palladium were studied. Conditions were selected for preparing a composite film on a glassy-carbon surface. It was found that palladium particles deposited on the polyvinylpyridine film exhibited electrocatalytic activity in the oxidation of H2C2O4. Compared to an unmodified electrode, the oxidation potential of oxalic acid decreased and the current of its oxidation multiply increased. The catalytic current of oxalic acid oxidation was a linear function of its concentration in the range from 1 × 10–2 to 1 × 10–6 M.