I. De Michelis

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

Bioassessment of a combined chemical-biological treatment for synthetic acid mine drainage

In this work, ecotoxicological characteristics of synthetic samples of acid mine drainage (AMD) before and after a combined chemical-biological treatment were investigated by using Lepidium sativum and Daphnia magna. AMD treatment was performed in a two-column apparatus consisting of chemical precipitation by limestone and biological refinement by sulphate reducing bacteria. Synthetic samples of AMD before treatment were toxic for both L. sativum (germination index, G, lower than 10%) and D. magna (100% immobility) due to acid pH and presence of copper and zinc. Chemical treatment (raising pH to 5-6 and eliminating copper) generated effluents with reduced toxicity for L. sativum (G=33%), while 100% immobility was still observed for D. magna. Dynamic trends of toxicity for the first and fifth outputs of the biological column denoted a gradual improvement leading to hormesis for Lepidium (after the initial release of organic excess), while a constant residual toxicity remained for Daphnia (probably due to H(2)S produced by sulphate reducing bacteria).