Ian Bennion
Aston University
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Ian Bennion.
Journal of Lightwave Technology | 2002
Xuewen Shu; Lin Zhang; Ian Bennion
We present a detailed investigation into the sensitivity of long-period fiber gratings (LPFGs) as a function of temperature, strain, and surrounding refractive index, with particular attention to the higher order cladding modes and the possibilities for ultrasensitive sensors. From a general theoretical analysis, we identify a general sensitivity factor which offers new physical insight into LPFG behavior and represents a useful design aid in conjunction with a set of measurand-specific sensitivity factors. Our analysis reveals the existence of turning points in the mode dispersion characteristics at which ultrasensitive operation may be obtained. In an extensive set of coordinated experiments, we verify the theoretical predictions with close agreement and provide demonstrations of the device behavior close to the turning points. Alternative sensor schemes for temperature, strain, and refractive index based, respectively, on measurement of the dual resonance characteristic of the modes and on the transmission characteristics close to the turning points, utilizing higher order modes of the LPFG, are presented. For two variables at least, we record the highest LPFG sensitivities yet reported.
IEEE Photonics Technology Letters | 1996
J. Chow; G. Town; Benjamin J. Eggleton; M. Ibsen; Kate Sugden; Ian Bennion
Simultaneous continuous wave multiwavelength operation of an erbium-doped fiber laser has been demonstrated using two types of recently developed in-fiber grating comb filters. The lasing wavelengths and linewidths were determined by the comb filter, which was inserted in a ring cavity with a single inhomogeneously broadened gain medium.
optical fiber communication conference | 2007
Y. Liu; E. Tangdiongga; Z. Li; H. de Waardt; A.M.J. Koonen; G.D. Khoe; Xuewen Shu; Ian Bennion; H.J.S. Dorren
We demonstrate error-free wavelength conversion at 320 Gb/s by employing a semiconductor optical amplifier that fully recovers in 56 ps. Error-free operation is achieved without using forward error correction technology. We employ optical filtering to select the blue sideband of the spectrum of the probe light, to utilize fast chirp dynamics introduced by the amplifier, and to overcome the slow gain recovery. This leads to an effective recovery time of less than 1.8 ps for the wavelength converter. The wavelength converter has a simple configuration and is implemented by using fiber-pigtailed components. The concept allows photonic integration
Optics Letters | 2001
Xuewen Shu; B.A.L. Gwandu; Y. Liu; Lin Zhang; Ian Bennion
We present a novel scheme for simultaneous measurement of temperature and refractive index by use of a single sampled fiber Bragg grating (SFBG). The intrinsic nature of a SFBG that possesses both fiber Bragg grating and long-period grating spectral responses permits the temperature effect to the measured solely from the former, whereas the refractive-index information is extracted from the latter. Using such a dual-parameter sensor, we successfully demonstrated measurement of the dependence on temperature of the refractive index of an aqueous solution of sucrose.
IEEE Photonics Technology Letters | 2000
Y. Liu; J.A.R. Williams; Ian Bennion
We report an effective new method of realizing optical bend sensing based on the measurement of bending-curvature encoded resonance mode splitting of long-period fiber grating. The bending induced mode splitting exhibits a near-linear response and the bending sensitivity achieved by this method is nearly four times higher than the previously reported wavelength shift detection method. The evolution of the transmission loss under bending appears dependent on the initial mode coupling strength.
Optics Letters | 2003
Gordon M. H. Flockhart; William N. MacPherson; James S. Barton; Julian D. C. Jones; Lin Zhang; Ian Bennion
We describe what is to our knowledge the first use of fiber Bragg gratings written into three separate cores of a multicore fiber for two-axis curvature measurement. The gratings act as independent, but isothermal, fiber strain gauges for which local curvature determines the difference in strain between cores, permitting temperature-independent bend measurement.
Optical and Quantum Electronics | 1996
Ian Bennion; J.A.R. Williams; Lin Zhang; Kate Sugden; Nick Doran
The techniques for fabrication and the properties of periodic and aperiodic fibre Bragg gratings produced by UV exposure in photosensitive optical fibres are reviwwed with an emphasis on applications.
Review of Scientific Instruments | 2002
Thomas D.P. Allsop; R. Reeves; David J. Webb; Ian Bennion; Ron Neal
A low cost interrogation scheme is demonstrated for a refractometer based on an in-line fiber long period grating (LPG) Mach–Zehnder interferometer. Using this interrogation scheme the minimum detectable change in refractive index of ?n ~ 1.8×10-6 is obtained, which is the highest resolution achieved using a fiber LPG device, and is comparable to precision techniques used in the industry including high performance liquid chromatography and ultraviolet spectroscopy.
Journal of Lightwave Technology | 1999
Alessandro Iocco; Hans Georg Limberger; René Paul Salathé; L.A. Everall; Karen E. Chisholm; J.A.R. Williams; Ian Bennion
A Bragg grating fast tunable filter prototype working over a linear tuning range of 45 nm with a maximum tuning speed of 21 nm/ms has been realized. The tunable filter system is based on two piezoelectric stack actuators moving a mechanical device thus compressing an apodized fiber Bragg grating. The filter allows both traction and compression and can work in transmission and in reflection. It is designed to work with a channel spacing of 100 GHz according to the ITU specifications for wavelength division multiplexing systems.
Optics Letters | 2005
Kaiming Zhou; George Simpson; Xianfeng F. Chen; Lin Zhang; Ian Bennion
We report a near-ideal in-fiber polarizer implemented by use of 45° tilted fiber Bragg grating structures that are UV inscribed in hydrogenated Ge-doped fiber. We demonstrate a polarization-extinction ratio of 33?dB over a 100-nm operation range near 1550?nm. We further show an achievement of 99.5% degree of polarization for unpolarized light with these gratings. We also theoretically investigate tilted grating structures based on the Greens function calculation, therein revealing the unique polarization characteristics, which are in excellent agreement with experimental data.