Ibrahim Abd El Malik Shehata

Strength of short concrete columns confined with CFRP sheets

The confinement of concrete columns provided by carbon fibre reinforced plastic (CFRP) sheets can be an efficient technique for their structural strengthening. The principal advantages of this technique are the high strength-to-weight ratio, good fatigue properties, non-corroding characteristics of the CFRP, and the facility of its application.An experimental research program, that included tests on 54 short column specimens, was carried out to investigate the gain in strength and ductility of concrete columns externally confined by CFRP wrapping. The variables studied were the column cross section shape (circular, square and rectangular) and the amount of confinement expressed in the number of CFRP sheet layers applied to the models (one or two layers).On the basis of the obtained results, equations were proposed to calculate the confined concrete strength and the ultimate confined concrete strain as a function of the confining lateral stress for each of the cross section geometry used, circular, square and rectangular. The estimations given by these equations and by those from formulas encountered in the literature were compared with the experimental ones and general conclusions were, finally, drawn.RésuméLe confinement de colonnes de béton assuré par des feuilles de plastique renforcé par des fibres de carbone (CFRP) peut être une technique efficace pour leur comportement structural. Les principaux avantages de cette technique sont la haute relation résistance-poids, des bonnes propriétés de fatigue, les caractéristiques non-corrosives du CFRP, et la facilité de leur application.Un programme expérimental comprenant des essais sur 54 colonnes courtes fut entrepris en vue de déterminer le gain de résistance et de ductilité de colonnes en béton confinées sur le plan externe en les recouvrant de feuilles de CFRP. Les variables étudiées étaient la forme de la section transversale (circulaire, carrée et rectangulaire), et la quantité de renforcement, mesurée par le nombre de feuilles de CFRP appliquées aux modèles (une ou deux couches).En prenant comme base les résultats obtenus, des équations ont été proposées pour calculer la résistance du béton confiné et sa déformation spécifique ultime en fonction de la contrainte latérale de confinement, pour chaque forme de section transversale utilisée, circulaire, carrée et rectangulaire. Les estimations données par ces équations et celles données par des formules trouvées dans la litérature ont été comparées avec les résultats expérimentaux et des conclusions générales ont finalement été établies.

Curvas de correlação para caracterizar concretos usados no Rio de Janeiro por meio de ensaios não destrutivos

Non-destructive tests give information about the properties of the concrete of a structure, but the reliability of the evaluation of those properties depends on the experience of the professional that carries out the tests and the curves employed to correlate the measured values with the properties of the investigated concrete. The main objective of this study was to supply engineers with correlation curves that make it possible to evaluate, by using non-destructive test results, the compressive strength and the modulus of elasticity of ready-mixed concretes used in Rio de Janeiro. Test specimens cast with concretes used in several constructions and supplied by different ready-mixed concrete producers were tested. These concretes had, in general, nominal fck value of 25 MPa or 30 MPa. Aiming to include concretes with strength varying within a wider range and made with the two types of typical coarse aggregates of Rio de Janeiro, test specimens cast in the laboratories of two readymixed concrete producers were tested. In these concretes, the water-cement ratio (0.40 to 0.60) and the petrographic characteristic of the coarse aggregate were varied. Compressive strength and modulus of elasticity tests, ultrasonic pulse velocity, rebound hammer and penetration resistance tests were carried out, at the ages of 3, 7, 14, 28 and 90 days. The correlation curves obtained from the analysis of the results of all those tests are presented here. When only one non-destructive test was used, the rebound hammer was the one that led to the best estimation of compressive strength and the combination of that test with the penetration resistance test improved the accuracy of the evaluation. If modulus of elasticity tests cannot be carried out, the ultrasonic pulse velocity test can be an interesting option to evaluate that property.

Compressive strength of concrete elements with variable dimensions

A semi=empirical method of evaluating the compressive strength of concrete elements that are under axial compression and have variable dimensions is suggested. In this method, the bearing strength of the elements is related to the longitudinal average stress gradient in the zone of failure. The results given by the method are shown to correlate well with test results.