Ignacio Giner

Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) yields better Hydrolytical Stability of Biocompatible SiOx Thin Films on Implant Alumina Ceramics compared to Rapid Thermal Evaporation Physical Vapor Deposition (PVD)

Densely sintered aluminum oxide (α-Al2O3) is chemically and biologically inert. To improve the interaction with biomolecules and cells, its surface has to be modified prior to use in biomedical applications. In this study, we compared two deposition techniques for adhesion promoting SiOx films to facilitate the coupling of stable organosilane monolayers on monolithic α-alumina; physical vapor deposition (PVD) by thermal evaporation and plasma enhanced chemical vapor deposition (PE-CVD). We also investigated the influence of etching on the formation of silanol surface groups using hydrogen peroxide and sulfuric acid solutions. The film characteristics, that is, surface morphology and surface chemistry, as well as the film stability and its adhesion properties under accelerated aging conditions were characterized by means of X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and tensile strength tests. Differences in surface functionalization were investigated via two model organosilanes as well as the cell-cytotoxicity and viability on murine fibroblasts and human mesenchymal stromal cells (hMSC). We found that both SiOx interfaces did not affect the cell viability of both cell types. No significant differences between both films with regard to their interfacial tensile strength were detected, although failure mode analyses revealed a higher interfacial stability of the PE-CVD films compared to the PVD films. Twenty-eight day exposure to simulated body fluid (SBF) at 37 °C revealed a partial delamination of the thermally deposited PVD films whereas the PE-CVD films stayed largely intact. SiOx layers deposited by both PVD and PE-CVD may thus serve as viable adhesion-promoters for subsequent organosilane coupling agent binding to α-alumina. However, PE-CVD appears to be favorable for long-term direct film exposure to aqueous solutions.

An efficient PE-ALD process for TiO2 thin films employing a new Ti-precursor

An efficient plasma-enhanced atomic layer deposition (PE-ALD) process was developed for TiO2 thin films of high quality, using a new Ti-precursor, namely tris(dimethylamido)-(dimethylamino-2-propanolato)titanium(IV) (TDMADT). The five-coordinated titanium complex is volatile, thermally stable and reactive, making it a potential precursor for ALD and PE-ALD processes. Process optimization was performed with respect to plasma pulse length and reactive gas flow rate. Besides an ALD window, the application of the new compound was investigated using in situ quartz-crystal microbalance (QCM) to monitor surface saturation and growth per cycle (GPC). The new PE-ALD process is demonstrated to be an efficient procedure to deposit stoichiometric titanium dioxide thin films under optimized process conditions with deposition temperatures as low as 60 °C. Thin films deposited on Si(100) and polyethylene-terephthalate (PET) exhibit a low RMS roughness of about 0.22 nm. In addition, proof-of-principle studies on TiO2 thin films deposited on PET show promising results in terms of barrier performance with oxygen transmission rates (OTR) found to be as low as 0.12 cm3 × cm−2 × day−1 for 14 nm thin films.

Molecular Arrangement in Langmuir and Langmuir―Blodgett Films of a Mesogenic Bent-Core Carboxylic Acid

A different alternative to previous research on Langmuir and Langmuir-Blodgett (LB) films of bent-core liquid crystals is reported in this work. A bent-shaped molecule wearing a terminal carboxylic group has been used to obtain monomolecular films with their long molecular axis almost perpendicular to the aqueous surface. Langmuir films at the air-liquid interface (pH=9) have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. A condensed phase is reached at surface pressures up to 20 mN x m-1. In this condensed phase, molecules are packed forming H-aggregates with a well-defined molecular orientation. Langmuir films have been transferred onto quartz and silicon substrates and characterized by means of UV-vis spectroscopy and XRR. The transference is Z-type, with a constant deposition of the monolayers. The total LB monolayer film thickness is evaluated to be about 5.8 nm, which is in good agreement with the deduced orientation at the air-liquid interface as well as with the lamellar order observed within the solid obtained by cooling the sample from the mesophase.

Temperature dependence of surface tension of 2-methyl-1-propanol and 2-methyl-2-propanol+n-hexane mixtures

Surface tensions of binary mixtures of 2-methyl-1-propanol or 2-methyl-2-propanol with n-hexane have been measured in the temperature range 283.15 K–313.15 K for mixtures containing 2-methyl-1-propanol and from 298.15 K to 313.15 K for mixtures formed by 2-methyl-2-propanol, with a drop volume tensiometer. The corresponding surface tension deviations have been calculated and correlated. Using the temperature dependence of surface tensions, the entropy and enthalpy of surface formation per unit area were evaluated at the studied temperatures.

Structure and corrosion resistance of cerium-oxide films on AZ31 as deposited by high-power ultrasound supported conversion chemistry

In the present study a conversion layer mainly composed by ceria oxide was prepared by means of a novel ultrasound assisted coating process. The formation of a conversion layer on top of the Mg alloy provides physical barrier properties improving the corrosion protection. In addition the incorporation of cerium oxide within the coating enables the formation of a protective layer on the pores and defect inhibiting localized corrosion. The chemical composition of the conversion layer was evaluated by means of Raman spectros-copy, FT-IR spectroscopy and XPS. The prepared porous films were rich in Ce4+ and featured a very low content of oxygen deficient cerium oxide. FE-SEM measurements were performed in order to assess the morphology of the prepared coating revealing homogeneous and uniform surfaces. Self-repair ability was verified by monitoring capacitance of the system after polarization by means of electrochemical impedance spectroscopy. Additional, Raman spectroscopic measurements showed presence of cerium ions in defect sites which may suggest self-repair mechanism.

Influence of the liquid crystal behaviour on the Langmuir and Langmuir–Blodgett film supramolecular architecture of an ionic liquid crystal

A new luminescent ionic liquid crystal, called Ipz-2, has been synthesised and its mesophase behaviour and also at the air-liquid interface has been studied and compared with Ipz, another ionic pyrazole derivative, with a similar molecular structure, previously studied. The X-ray diffraction pattern shows that Ipz-2 exhibits hexagonal columnar mesomorphism, while Ipz adopts lamellar mesophases. Langmuir films of both compounds are flat and homogeneous at large areas per molecule, but create different supramolecular structures under further compression. Ipz-2 Langmuir films have been transferred onto solid substrates, and Atomic Force Microscopy (AFM) images of the Langmuir-Blodgett films have shown that large columnar structures hundreds of nm in diameter are formed on top of the initial monolayer, in contrast with well-defined trilayer LB films obtained for Ipz. Our results show that Ipz-2 has a tendency to stack in columnar arrangements both in liquid crystalline bulk and in Langmuir and Langmuir-Blodgett films.

Air-water interfacial behavior of linear-dendritic block copolymers containing PEG and azobenzene chromophores.

Fabrication of Langmuir films at the air-water interface of four linear-dendritic block copolymers (LDBCs) is described. The LDBCs are composed of a linear hydrophilic chain of poly(ethylene glycol) (PEG) and the first four generations of hydrophobic aliphatic polyester dendrons functionalized at the periphery with cyanoazobenzene chromophores. Langmuir films of the LDBCs, coded as PEG-AZOn (n indicates the number of cyanoazobenzene units at the periphery of the dendritic block), have been characterized by a combination of surface pressure versus area per molecule isotherms, UV-vis reflection spectroscopy and Brewster angle microscopy. The observed PEG-AZOn Langmuir film behavior depends strongly on the hydrophilic/hydrophobic ratio. A typical transition, related to PEG chains desorption from the air-water interface into the water subphase is observed for all the LDBCs, except for PEG-AZO16. In addition, PEG-AZO2 and PEG-AZO4 show a second transition whose nature has been studied in detail. Azobenzene chromophore interactions have been shown to be relevant in the organization of PEG-AZOn (n=4, 8 and 16) Langmuir films. Moreover, for PEG-AZO16 the orientation of the azobenzene units has been determined, revealing the formation of a well organized structure of azobenzene moieties at the air-water interface.

Refractive indices and molar refractions of binary mixtures formed by some cyclic ethers and isomeric chlorobutanes

Refractive indices of binary mixtures formed by a cyclic ether (tetrahydrofuran or tetrahydropyran) and each of the isomeric chlorobutanes (1-chlorobutane, 2-chlorobutane, 1-chloro-2-methylpropane and 2-chloro-2-methylpropane) have been measured at two temperatures, 298.15 K and 313.15 K. From experimental data, refractive index deviations and molar refractions have been calculated. Furthermore, several common mixing rules have been used to predict refractive indices of the mixtures from their experimental densities reported previously.

Self-Assembly, Dynamics, and Polymorphism of hIAPP(20-29) Aggregates at Solid-Liquid Interfaces.

The misfolding and subsequent assembly of proteins and peptides into insoluble amyloid structures play important roles in the development of numerous diseases. The dynamics of self-assembly and the morphology of the resulting aggregates critically depend on various environmental factors and especially on the presence of interfaces. Here, we show in detail how the presence of surfaces with different physicochemical properties influences the assembly dynamics and especially the aggregate morphology of hIAPP(20-29), an amyloidogenic fragment of the peptide hormone human islet amyloid polypeptide (hIAPP), which is involved in the development of type 2 diabetes. Time-lapse atomic force microscopy is employed to study the assembly dynamics of hIAPP(20-29) and the morphology of the resulting aggregates in bulk solution as well as at hydrophilic and hydrophobic model surfaces. We find that the presence of hydrophilic mica surfaces promotes fibrillation when compared with the assembly in bulk solution and results in a more pronounced polymorphism. Three fibrillar species are found to coexist on the mica surface, that is, straight, coiled, and ribbon-like fibrils, whereas only the straight and coiled fibrils are observed in bulk solution after comparable incubation times. In addition, the straight and coiled fibrils assembled at the mica surface have significantly different dimensions compared with those assembled in bulk solution. The three fibrillar species found on the mica surface most likely form independently by lateral association of arbitrary numbers of protofibrils with about 2 nm height. On hydrophobic hydrocarbon surfaces, fibrillation is retarded but not completely suppressed, in contrast to previous observations for full-length hIAPP(1-37). Our results show that peptide-surface interactions may induce diverse, peptide-specific alterations of amyloid assembly dynamics and fibrillar polymorphism. They may therefore contribute to a deeper understanding of the molecular processes that govern amyloid aggregation at different surfaces.

Unearthing [3‐(Dimethylamino)propyl]aluminium(III) Complexes as Novel Atomic Layer Deposition (ALD) Precursors for Al2O3: Synthesis, Characterization and ALD Process Development

Identification and synthesis of intramolecularly donor-stabilized aluminium(III) complexes, which contain a 3-(dimethylamino)propyl (DMP) ligand, as novel atomic layer deposition (ALD) precursors has enabled the development of new and promising ALD processes for Al2 O3 thin films at low temperatures. Key for this promising outcome is the nature of the ligand combination that leads to heteroleptic Al complexes encompassing optimal volatility, thermal stability and reactivity. The first ever example of the application of this family of Al precursors for ALD is reported here. The process shows typical ALD like growth characteristics yielding homogeneous, smooth and high purity Al2 O3 thin films that are comparable to Al2 O3 layers grown by well-established, but highly pyrophoric, trimethylaluminium (TMA)-based ALD processes. This is a significant development based on the fact that these compounds are non-pyrophoric in nature and therefore should be considered as an alternative to the industrial TMA-based Al2 O3 ALD process used in many technological fields of application.