Il Hee Kim

Low Temperature CO oxidation over Iron Oxide Nanoparticles Decorating Internal Structures of a Mesoporous Alumina

Using a chemical vapor deposition method with regulated sample temperatures under ambient pressure conditions, we were able to fully decorate the internal structure of a mesoporous Al2O3 bead (~1 mm in particle diameter) with iron oxide nanoparticles (with a mean lateral size of less than 1 nm). The iron oxide-decorated Al2O3 showed a high CO oxidation reactivity, even at room temperature. Very little deactivation of the CO oxidation activity was observed with increasing reaction time at ~100 °C. Additionally, this catalyst showed high CO oxidation activity, even after annealing at ~900 °C under atmospheric conditions (i.e., the structure of the catalysts could be maintained under very harsh treatment conditions). We show that our catalysts have potential for application as oxidation catalysts in industrial processes due to the simplicity of their fabrication process as well as the high and stable catalytic performance.

Structural Effect of Thioureas on the Detection of Chemical Warfare Agent Simulants

The ability to rapidly detect, identify, and monitor chemical warfare agents (CWAs) is imperative for both military and civilian defense. Since most CWAs and their simulants have an organophosphonate group, which is a hydrogen (H)-bond acceptor, many H-bond donors have been developed to effectively bind to the organophosphonate group. Although thioureas have been actively studied as an organocatalyst, they are relatively less investigated in CWA detection. In addition, there is a lack of studies on the structure-property relationship for gas phase detection. In this study, we synthesized various thioureas of different chemical structures, and tested them for sensing dimethylmethylphosphonate (DMMP), a CWA simulant. Molecular interaction between DMMP and thiourea was measured by 1H NMR titration and supported by density functional theory (DFT) calculations. Strong H-bond donor ability of thiourea may cause self-aggregation, and CH-π interaction can play an important role in the DMMP detection. Gas-phase adsorption of DMMP was also measured using a quartz crystal microbalance (QCM) and analyzed using the simple Langmuir isotherm, showing the importance of structure-induced morphology of thioureas on the surface.

Dynamic secondary ion mass spectroscopy of Au nanoparticles on Si wafer using Bi3+ as primary ion coupled with surface etching by Ar cluster ion beam: The effect of etching conditions on surface structure

Wet-chemically synthesized Au nanoparticles were deposited on Si wafer surfaces, and the secondary ions mass spectra (SIMS) from these samples were collected using Bi3+ with an energy of 30 keV as the primary ions. In the SIMS, Au cluster cations with a well-known, even-odd alteration pattern in the signal intensity were observed. We also performed depth profile SIMS analyses, i.e., etching the surface using an Ar gas cluster ion beam (GCIB), and a subsequent Bi3+ SIMS analysis was repetitively performed. Here, two different etching conditions (Ar1600 clusters of 10 keV energy or Ar1000 of 2.5 keV denoted as “harsh” or “soft” etching conditions, respectively) were used. Etching under harsh conditions induced emission of the Au-Si binary cluster cations in the SIMS spectra of the Bi3+ primary ions. The formation of binary cluster cations can be induced by either fragmentation of Au nanoparticles or alloying of Au and Si, increasing Au-Si coordination on the sample surface during harsh GCIB etching. Alterna...

Synthesis and Catalytic Activity of Electrospun NiO/NiCo 2 O 4 Nanotubes for CO and Acetaldehyde Oxidation

NiO/NiCo2O4 nanotubes with a diameter of approximately 100 nm are synthesized using Ni and Co precursors via electro-spinning and subsequent calcination processes. The tubular structure is confirmed via transmission electron microscopy imaging, whereas the structures and elemental compositions of the nanotubes are determined using x-ray diffraction, energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy. N2 adsorption isotherm data reveal that the surface of the nanotubes consists of micropores, thereby resulting in a significantly higher surface area (∼20 m2 g-1) than expected for a flat-surface structure (<15 m2 g-1). Herein, we present a study of the catalytic activity of our novel NiO/NiCo2O4 nanotubes for CO and acetaldehyde oxidation. The catalytic activity of NiO/NiCo2O4 is superior to Pt below 100 °C for CO oxidation. For acetaldehyde oxidation, the total oxidation activity of NiO/NiCo2O4 for acetaldehyde is comparable with that of Pt. Coexistence of many under-coordinated Co and Ni active sites in our structure is suggested be related to the high catalytic activity. It is suggested that our novel NiO/NiCo2O4 tubular structures with surface microporosity can be of interest for a variety of applications, including the catalytic oxidation of harmful gases.

Use of NiO/SiO2 catalysts for toluene total oxidation: Catalytic reaction at lower temperatures and repeated regeneration

Abstract We deposited NiO via atomic layer deposition on mesoporous SiO2 particles with diameters of several hundred micrometers and a mean mesopore size of ∼14 nm. NiO was deposited within the shell region of mesoporous SiO2 particles with a shell thickness of ∼11 mm. We annealed the as-prepared NiO/SiO2 at 450 and 600 °C, respectively. These two samples were used as catalysts for the uptake of toluene molecules and their oxidative conversion to CO2. The sample annealed at 450 °C was generally more reactive in toluene uptake and its subsequent conversion to CO2. When the NiO/SiO2 annealed at 450 °C was exposed to toluene vapor at 160 °C and then heated to 450 °C, CO2 was emitted with almost no toluene desorption. We suggest that our catalysts can be used as building blocks for odor removal devices that operate below 200 °C. These catalysts can be regularly regenerated at ∼450 °C.