Ilaria Fortunati

Dissipative self-assembly of vesicular nanoreactors

Dissipative self-assembly is exploited by nature to control important biological functions, such as cell division, motility and signal transduction. The ability to construct synthetic supramolecular assemblies that require the continuous consumption of energy to remain in the functional state is an essential premise for the design of synthetic systems with lifelike properties. Here, we show a new strategy for the dissipative self-assembly of functional supramolecular structures with high structural complexity. It relies on the transient stabilization of vesicles through noncovalent interactions between the surfactants and adenosine triphosphate (ATP), which acts as the chemical fuel. It is shown that the lifetime of the vesicles can be regulated by controlling the hydrolysis rate of ATP. The vesicles sustain a chemical reaction but only as long as chemical fuel is present to keep the system in the out-of-equilibrium state. The lifetime of the vesicles determines the amount of reaction product produced by the system.

Evaluation of gold nanoparticles toxicity towards human endothelial cells under static and flow conditions.

A new in vitro model system, adding advection and shear stress associated with a flowing medium, is proposed for the investigation of nanoparticles uptake and toxicity towards endothelial cells, since these processes are normally present when nanoparticles formulations are intravenously administered. In this model system, mechanical forces normally present in vivo, such as advection and shear stress were applied and carefully controlled by growing human umbilical vein endothelial cells inside a microfluidic device and continuously infusing gold nanoparticle (Au NPs) solution in the device. The tests performed in the microfluidic device were also run in multiwells, where no flow is present, so as to compare the two model systems and evaluate if gold nanoparticles toxicity differs under static and flow culture conditions. Full characterization of Au NPs in water and in culture medium was accomplished by standard methods. Two-photon fluorescence correlation spectroscopy was also employed to map the flow speed of Au NPs in the microfluidic device and characterize Au NPs before and after interactions with the cells. Au NPs uptake in both in vitro systems was investigated through electron and fluorescence microscopy and ICP-AES, and NPs toxicity measured through standard bio-analytical tests. Comparison between experiments run in multiwells and in microfluidic device plays a pivotal role for the investigation of nanoparticle-cell interaction and toxicity assessment: our work showed that administration of equal concentrations of Au NPs under flow conditions resulted in a reduced sedimentation of nanoparticle aggregates onto the cells and lower cytotoxicity with respect to experiments run in ordinary static conditions (multiwells).

Effective two-photon absorption cross section of heteroaromatic quadrupolar dyes: dependence on measurement technique and laser pulse characteristics.

The linear and nonlinear optical properties of the heteroaromatic push-pull-push two-photon absorbing dye N-methyl-2,5-bis[1-(N-methylpyrid-4-yl)ethen-2-yl]-pyrrole ditriflate (PEPEP) are reported. The determination of the two-photon absorption (TPA) cross-section spectrum has been performed with different techniques: femtosecond TPA-white light continuum probe experiments, two-photon-induced fluorescence, and open aperture Z-scan measurements using both nanosecond and femtosecond laser pulses. The measured TPA cross sections and their wavelength dispersion show a marked dependence on the parameters of the laser pulses and on the measurement technique employed. These properties are discussed in terms of the different microscopic mechanisms that can contribute to the multiphoton absorption processes, with different weight depending on the measurement conditions and on the photophysical parameters of the dye.

Spectroscopic Insights into Carbon Dot Systems

The controversial nature of the fluorescent properties of carbon dots (CDs), ascribed either to surface states or to small molecules adsorbed onto the carbon nanostructures, is an unresolved issue. To date, an accurate picture of CDs and an exhaustive structure-property correlation are still lacking. Using two unconventional spectroscopic techniques, fluorescence correlation spectroscopy (FCS) and time-resolved electron paramagnetic resonance (TREPR), we contribute to fill this gap. Although electron micrographs indicate the presence of carbon cores, FCS reveals that the emission properties of CDs are based neither on those cores nor on molecular species linked to them, but rather on free molecules. TREPR provides deeper insights into the structure of carbon cores, where C sp2 domains are embedded within C sp3 scaffolds. FCS and TREPR prove to be powerful techniques, characterizing CDs as inherently heterogeneous systems, providing insights into the nature of such systems and paving the way to standardization of these nanomaterials.

An easy-to-handle microfluidic device suitable for immunohistochemical procedures in mammalian cells grown under flow conditions

Microfluidics, the technology that manipulates small amount of fluids in microscale complex devices, has undergone a remarkable development during the last decade, by targeting a significant range of applications, including biological tests and single-cell analysis, and by displaying many advantages such as reduced reagent consumption, decreased costs and faster analysis. Furthermore, the introduction of microfluidic tools has revolutionized the study of vascular functions, because the controlled three-dimensional environment and the continuous perfusion provided by the microdevice allow simulating the physiological characteristics of the circulatory system. Researchers interested in the study of vascular physiology, however, are often hampered by the difficulty in handling reduced number of cells after growth in these devices. This work shows how to apply different protocols commonly used in biology, such as the immunofluorescence technique, to cells grown in reversibly-bound microfluidic devices, obtaining results comparable to those retrieved under static conditions in multiwells. In this way, we are able to combine the advantages of microfluidic, i.e., application of continuous flow and shear stress, with classical protocols for the study of endothelial cells.

Engineering of Semiconductor Nanocrystals for Light Emitting Applications

Semiconductor nanocrystals are rapidly spreading into the display and lighting markets. Compared with liquid crystal and organic LED displays, nanocrystalline quantum dots (QDs) provide highly saturated colors, wide color gamut, resolution, rapid response time, optical efficiency, durability and low cost. This remarkable progress has been made possible by the rapid advances in the synthesis of colloidal QDs and by the progress in understanding the intriguing new physics exhibited by these nanoparticles. In this review, we provide support to the idea that suitably engineered core/graded-shell QDs exhibit exceptionally favorable optical properties, photoluminescence and optical gain, while keeping the synthesis facile and producing QDs well suited for light emitting applications. Solid-state laser emitters can greatly profit from QDs as efficient gain materials. Progress towards fabricating low threshold, solution processed DFB lasers that are optically pumped using one- and two-photon absorption is reviewed. In the field of display technologies, the exploitation of the exceptional photoluminescence properties of QDs for LCD backlighting has already advanced to commercial levels. The next big challenge is to develop the electroluminescence properties of QD to a similar state. We present an overview of QLED devices and of the great perspectives for next generation display and lighting technologies.

Temporal Control over Transient Chemical Systems using Structurally Diverse Chemical Fuels

The next generation of adaptive, intelligent chemical systems will rely on a continuous supply of energy to maintain the functional state. Such systems will require chemical methodology that provides precise control over the energy dissipation process, and thus, the lifetime of the transiently activated function. This manuscript reports on the use of structurally diverse chemical fuels to control the lifetime of two different systems under dissipative conditions: transient signal generation and the transient formation of self-assembled aggregates. The energy stored in the fuels is dissipated at different rates by an enzyme, which installs a dependence of the lifetime of the active system on the chemical structure of the fuel. In the case of transient signal generation, it is shown that different chemical fuels can be used to generate a vast range of signal profiles, allowing temporal control over two orders of magnitude. Regarding self-assembly under dissipative conditions, the ability to control the lifetime using different fuels turns out to be particularly important as stable aggregates are formed only at well-defined surfactant/fuel ratios, meaning that temporal control cannot be achieved by simply changing the fuel concentration.

High-Purity Hybrid Organolead Halide Perovskite Nanoparticles Obtained by Pulsed-Laser Irradiation in Liquid

Nanoparticles of hybrid organic-inorganic perovskites have attracted a great deal of attention due to their variety of optoelectronic properties, their low cost, and their easier integration into devices with complex geometry, compared with microcrystalline, thin-film, or bulk metal halides. Here we present a novel one-step synthesis of organolead bromide perovskite nanocrystals based on pulsed-laser irradiation in a liquid environment (PLIL). Starting from a bulk CH3 NH3 PbBr3 crystal, our PLIL procedure does not involve the use of high-boiling-point polar solvents or templating agents, and runs at room temperature. The resulting nanoparticles are characterized by high crystallinity and are completely free of any microscopic product or organic coating layer. We also demonstrate the straightforward inclusion of laser-generated perovskite nanocrystals in a polymeric matrix to form a nanocomposite with single- and two-photon luminescence properties.

Photopolymerization of hybrid organic/inorganic materials based on nanostructured units for photonic applications

In this work we report on the study of the photopolymerization process in hybrid organic-inorganic films containing photopolymerizable acrylic and methacrylic groups and. The films are doped with a proper photo-initiator for radical polymerization of (meth)acrylic units and are prepared using the sol-gel technique. The photo-initiator is activated by using continuum (single-photon polymerization) or pulsed (two-photon polymerization) laser sources at different wavelengths. After the development of the unexposed regions with a suitable solvent, the photopolymerized structures are observed with microscopy techniques. The effects of the composition of the photopolymerizable mixture, the irradiation parameters (laser power and exposure time) and the external atmosphere in which the photopolymerization is performed are investigated. The fabrication of 3D microstructures using multiphoton absorption processes is a promising technique that involves low amount of incident exposure dose with potentially high spatial resolution.

One- and two-photon pumped soft lithographed DFB laser systems based on semiconductor core-shell quantum dots

In the last years inorganic semiconductor (particularly CdSe and CdS) quantum dots (QDs) have received great attention for their important optical properties. The possibility to tune the emission wavelength, together with their high fluorescence quantum efficiency and photostability, can be exploited in photonic and optoelectronic technological applications. The design of DFB devices, based on QDs as active optical material, leads to the realization of compact laser systems. In this work we explore the use of an inorganic/organic hybrid material composed of CdSe-ZnS semiconductor quantum dots doped into a zirconia sol-gel matrix for optical gain applications. Through the use of soft lithography on a sol-gel germania-silica hybrid, large scale distributed feedback gratings can be created. Used in conjunction with the CdSe-ZnS/ZrO2 hybrids, these gratings can act as microcavities and allow for the realization of true lasing action. The lasing properties within these devices are characterized in the femtosecond regime by both one- and two-photon excitation. From experimental data the value of the optical gain of the core-shell quantum dot samples has been estimated. Moreover, one- and two-photon lasing threshold and stability are reported.