Indranath Chakraborty

The superstable 25 kDa monolayer protected silver nanoparticle: measurements and interpretation as an icosahedral Ag152(SCH2CH2Ph)60 cluster.

A cluster obtained in high yield from the reduction of a silver-thiolate precursor, Ag-SCH(2)CH(2)Ph, exhibited a single sharp peak near 25 kDa in the matrix-assisted laser desorption mass spectrum (MALDI MS) and a well-defined metal core of ~2 nm measured with transmission electron microscopy (TEM). The cluster yields a single fraction in high-performance liquid chromatography (HPLC). Increased laser fluence fragments the cluster until a new peak near 19 kDa predominates, suggesting that the parent cluster-Ag(152)(SCH(2)CH(2)Ph)(60)-evolves into a stable inorganic core-Ag(152)S(60). Exploiting combined insights from investigations of clusters and surface science, a core-shell structure model was developed, with a 92-atom silver core having icosahedral-dodecahedral symmetry and an encapsulating protective shell containing 60 Ag atoms and 60 thiolates arranged in a network of six-membered rings resembling the geometry found in self-assembled monolayers on Ag(111). The structure is in agreement with small-angle X-ray scattering (SAXS) data. The protective layer encapsulating this silver cluster may be the smallest known three-dimensional self-assembled monolayer. First-principles electronic structure calculations show, for the geometry-optimized structure, the development of a ~0.4 eV energy gap between the highest-occupied and lowest-unoccupied states, originating from a superatom 90-electron shell-closure and conferring stability to the cluster. The optical absorption spectrum of the cluster resembles that of plasmonic silver nanoparticles with a broad single feature peaking at 460 nm, but the luminescence spectrum shows two maxima with one attributed to the ligated shell and the other to the core.

Luminescent sub-nanometer clusters for metal ion sensing: A new direction in nanosensors

We describe the application of a recently discovered family of materials called quantum clusters, which are sub-nanometer particles composed of a few atoms with well-defined molecular formulae, exhibiting intense absorption and emission in the visible region in metal ion sensing, taking Ag(25) as an example. The changes in the optical properties of the cluster, in both absorption and emission upon exposure to various metal ions in aqueous medium are explored. The cluster can detect Hg(2+) down to ppb levels. It can also detect 5d block ions (Pt(2+), Au(3+) and Hg(2+)) down to ppm limits. Hg(2+) interacts with the metal core as well as the functional groups of the capping agents and the interaction is concentration-dependent. To understand the mechanism behind this type of specific interaction, we have used spectroscopic and microscopic techniques such as UV-vis spectroscopy, luminescence spectroscopy, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). Specific reasons responsible for the interaction of Hg(2+) have been proposed.

Intercluster Reactions between Au25(SR)18 and Ag44(SR)30

We present the first example of intercluster reactions between atomically precise, monolayer protected noble metal clusters using Au25(SR)18 and Ag44(SR)30 (RS- = alkyl/aryl thiolate) as model compounds. These clusters undergo spontaneous reaction in solution at ambient conditions. Mass spectrometric measurements both by electrospray ionization and matrix assisted laser desorption ionization show that the reaction occurs through the exchange of metal atoms and protecting ligands of the clusters. Intercluster alloying is demonstrated to be a much more facile method for heteroatom doping into Au25(SR)18, as observed by doping up to 20 Ag atoms. We investigated the thermodynamic feasibility of the reaction using DFT calculations and a tentative mechanism has been presented. Metal core-thiolate interfaces in these clusters play a crucial role in inducing these reactions and also affect rates of these reactions. We hope that our work will help accelerate activities in this area to establish chemistry of monolayer protected clusters.

Ag44(SeR)30: A Hollow Cage Silver Cluster with Selenolate Protection

Selenolate protected, stable and atomically precise, hollow silver cluster was synthesized using solid state as well as solution state routes. The optical absorption spectrum shows multiple and sharp features similar to the thiolated Ag44 cluster, Ag44(SR)30 whose experimental structure was reported recently. High-resolution electrospray ionization mass spectrometry (HRESI MS) shows well-defined molecular ion features with two, three, and four ions with isotopic resolution, due to Ag44(SePh)30. Additional characterization with diverse tools confirmed the composition. The closed-shell 18 electron superatom electronic structure, analogous to Ag44(SR)30 stabilizes the dodecahedral cage with a large HOMO-LUMO gap of 0.71 eV. The time-dependent density functional theory (TDDFT) prediction of the optical absorption spectrum, assuming the Ag44(SR)30 structure, matches the experimental data, confirming the structure.

Sunlight mediated synthesis and antibacterial properties of monolayer protected silver clusters

Glutathione protected, silver clusters were synthesized within gel cavities, using sunlight. Compared to the conventional chemical reduction process, this method is cheaper and environmentally friendly as it involves the use of natural resources. The as-synthesized silver quantum clusters in aqueous medium show a distinct step-like behavior in their absorption profile. They have been characterized with various spectroscopic and microscopic techniques such as UV/Vis Spectroscopy, Luminescence Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), High Resolution Transmission Electron Microscopy (HRTEM), and X-ray Photoelectron Spectroscopy (XPS). Polyacrylamide gel cavities seemingly control the growth of the particles. The cluster synthesis is scalable by increasing the amount of reagents yielding hundreds of milligrams in a single step. The antibacterial properties of the as-synthesized Ag clusters were studied against a Gram negative and Gram positive organism, Escherichia coli and Staphylococcus aureus, respectively.

In Situ Single‐Nanoparticle Spectroscopy Study of Bimetallic Nanostructure Formation

Bimetallic nanostructures (NSs), with utility in catalysis, are typically prepared using galvanic exchange (GE), but the final catalyst morphology is dictated by the dynamics of the process. In situ single nanoparticle (NP) optical scattering spectroscopy, coupled with ex situ electron microscopy, is used to capture the dynamic structural evolution of a bimetallic NS formed in a GE reaction between Ag and [PtCl6 ](2-) . We identify an early stage involving anisotropic oxidation of Ag to AgCl concomitant with reductive deposition of small Pt clusters on the NS surface. At later stages of GE, unreacted Ag inclusions phase segregate from the overcoated AgCl as a result of lattice strain between Ag and AgCl. The nature of the structural evolution elucidates why multi-domain Ag/AgCl/Pt NSs result from the GE process. The complex structural dynamics, determined from single-NP trajectories, would be masked in ensemble studies due to heterogeneity in the response of different NPs.

Isolation and Tandem Mass Spectrometric Identification of a Stable Monolayer Protected Silver-Palladium Alloy Cluster.

A selenolate-protected Ag-Pd alloy cluster was synthesized using a one-pot solution-phase route. The crude product upon chromatographic analyses under optimized conditions gave three distinct clusters with unique optical features. One of these exhibits a molecular peak centered at m/z 2839, in its negative ion mass spectrum assigned to Ag5Pd4(SePh)12(-), having an exact match with the corresponding calculated spectrum. Tandem mass spectrometry of the molecular ion peak up to MS(9) was performed. Complex isotope distributions in each of the mass peaks confirmed the alloy composition. We find the Ag3Pd3(-) core to be highly stable. The composition was further supported by scanning electron microscopy, energy-dispersive spectroscopy, and X-ray photoelectron spectroscopy.

Quantitative uptake of colloidal particles by cell cultures.

The use of nanotechnologies involving nano- and microparticles has increased tremendously in the recent past. There are various beneficial characteristics that make particles attractive for a wide range of technologies. However, colloidal particles on the other hand can potentially be harmful for humans and environment. Today, complete understanding of the interaction of colloidal particles with biological systems still remains a challenge. Indeed, their uptake, effects, and final cell cycle including their life span fate and degradation in biological systems are not fully understood. This is mainly due to the complexity of multiple parameters which need to be taken in consideration to perform the nanosafety research. Therefore, we will provide an overview of the common denominators and ideas to achieve universal metrics to assess their safety. The review discusses aspects including how biological media could change the physicochemical properties of colloids, how colloids are endocytosed by cells, how to distinguish between internalized versus membrane-attached colloids, possible correlation of cellular uptake of colloids with their physicochemical properties, and how the colloidal stability of colloids may vary upon cell internalization. In conclusion three main statements are given. First, in typically exposure scenarios only part of the colloids associated with cells are internalized while a significant part remain outside cells attached to their membrane. For quantitative uptake studies false positive counts in the form of only adherent but not internalized colloids have to be avoided. pH sensitive fluorophores attached to the colloids, which can discriminate between acidic endosomal/lysosomal and neutral extracellular environment around colloids offer a possible solution. Second, the metrics selected for uptake studies is of utmost importance. Counting the internalized colloids by number or by volume may lead to significantly different results. Third, colloids may change their physicochemical properties along their life cycle, and appropriate characterization is required during the different stages.

Cluster-Mediated Crossed Bilayer Precision Assemblies of 1D Nanowires

Highly organized crossed bilayer assemblies of nanowires (NWs) are made using directed hydrogen bonding between the protecting ligand shells of atomically precise cluster molecules anchored on NWs. Layers of quantum clusters remain sandwiched between two neighboring NWs at a defined distance, dictated by the core-size of the cluster, while the orientation of the ligands in space dictates the interlayer geometry.

Atomically precise and monolayer protected iridium clusters in solution

The first atomically precise and monolayer protected iridium cluster in solution, Ir9(PET)6 (PET – 2-phenyethanethiol) was synthesized via a solid state method. The absence of a plasmonic band at ∼350 nm, expected in the UV/Vis spectra for spherical Ir particles of 10 nm size indicated that the synthesized cluster is smaller than this dimension. Small angle X-ray scattering (SAXS) showed that the cluster has a particle size of ∼2 nm in solution which was confirmed by transmission electron microscopy (TEM). The blue emission of the cluster is much weaker than many noble metal clusters investigated so far. X-ray photoelectron spectroscopy (XPS) measurements showed that all Ir atoms of the cluster are close to the zero oxidation state. The characteristic S–H vibrational peak of PET at 2560 cm−1 was absent in the FT-IR spectrum of the cluster indicating RS–Ir bond formation. The molecular formula of the cluster, Ir9(PET)6 was assigned based on the most significant peak at m/z 2553 in the matrix assisted laser desorption ionization mass spectrum (MALDI MS), measured at the threshold laser intensity. Density functional theory calculations on small Ir@SCH3 and Ir@PET clusters and comparison of the predictions with the IR and 1H-NMR spectra of Ir9(PET)6 suggested that the PET ligands have two distinct structural arrangements and are likely to be present as bridging thiolates –(Ir–SR–Ir)– and singly attached thiolates –(Ir–SR).