Inês Santos Ferreira

Improvement of the antibacterial activity of daptomycin-loaded polymeric microparticles by Eudragit RL 100: an assessment by isothermal microcalorimetry.

The aim of the present study was to develop novel daptomycin-loaded acrylic microparticles with improved release profiles and antibacterial activity against two clinically relevant methicillin-susceptible and methicillin-resistant Staphylococcus aureus strains (MSSA and MRSA, respectively). Daptomycin was encapsulated into poly(methyl methacrylate) (PMMA) and PMMA-Eudragit RL 100 (EUD) microparticles by a double emulsion-solvent evaporation method. For comparison purposes similar formulations were prepared with vancomycin. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties, in vitro release and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. The addition of EUD to the formulation caused a shift in the surface charge of the particles from negative zeta potential values (100% PMMA formulations) to strongly positive. It also improved daptomycin encapsulation efficiency and release, whereas vancomycin encapsulation and release were strongly hindered. Plain and antibiotic-loaded particles presented comparable biocompatibility profiles. The antibacterial activity of the particles was assessed by isothermal microcalorimetry against both MSSA and MRSA. Daptomycin-loaded PMMA-EUD particles presented the highest antibacterial activity against both strains. The addition of 30% EUD to the daptomycin-loaded PMMA particles caused a 40- and 20-fold decrease in the minimum inhibitory (MIC) and bactericidal concentration (MBC) values, respectively, when compared to the 100% PMMA formulations. On the other hand, vancomycin-loaded microparticles presented the highest antibacterial activity in PMMA particles. Unlike conventional methods, isothermal microcalorimetry proved to be a real-time, sensitive and accurate method for assessment of antibacterial activity of antibiotic-loaded polymeric microparticles. Finally, the addition of EUD to formulations proved to be a powerful strategy to improve daptomycin encapsulation efficiency and release, and consequently improving the microparticles activity against two relevant S. aureus strains.

Activity of daptomycin- and vancomycin-loaded poly-epsilon-caprolactone microparticles against mature staphylococcal biofilms.

The aim of the present study was to develop novel daptomycin-loaded poly-epsilon-caprolactone (PCL) microparticles with enhanced antibiofilm activity against mature biofilms of clinically relevant bacteria, methicillin-resistant Staphylococcus aureus (MRSA) and polysaccharide intercellular adhesin-positive Staphylococcus epidermidis. Daptomycin was encapsulated into PCL microparticles by a double emulsion-solvent evaporation method. For comparison purposes, formulations containing vancomycin were also prepared. Particle morphology, size distribution, encapsulation efficiency, surface charge, thermal behavior, and in vitro release were assessed. All formulations exhibited a spherical morphology, micrometer size, and negative surface charge. From a very early time stage, the released concentrations of daptomycin and vancomycin were higher than the minimal inhibitory concentration and continued so up to 72 hours. Daptomycin presented a sustained release profile with increasing concentrations of the drug being released up to 72 hours, whereas the release of vancomycin stabilized at 24 hours. The antibacterial activity of the microparticles was assessed by isothermal microcalorimetry against planktonic and sessile MRSA and S. epidermidis. Regarding planktonic bacteria, daptomycin-loaded PCL microparticles presented the highest antibacterial activity against both strains. Isothermal microcalorimetry also revealed that lower concentrations of daptomycin-loaded microparticles were required to completely inhibit the recovery of mature MRSA and S. epidermidis biofilms. Further characterization of the effect of daptomycin-loaded PCL microparticles on mature biofilms was performed by fluorescence in situ hybridization. Fluorescence in situ hybridization showed an important reduction in MRSA biofilm, whereas S. epidermidis biofilms, although inhibited, were not eradicated. In addition, an important attachment of the microparticles to MRSA and S. epidermidis biofilms was observed. Finally, all formulations proved to be biocompatible with both ISO compliant L929 fibroblasts and human MG63 osteoblast-like cells.

Incorporation of tocopherol acetate-containing particles in acrylic bone cement

Acrylic bone cement (BC) is used in orthopaedic surgery to anchor cemented prostheses to bone. Association of antioxidant molecules to BC may suppress reactive species injury which contributes to implant failure. Tocopherol acetate (ATA)-loaded polymethylmethacrylate (PMMA) particles (ATA(PMMA)) were prepared by single emulsion solvent evaporation technique and were incorporated into BC. An encapsulation efficiency of 84% (w/w) was obtained and drug release studies showed distinct ATA release profiles and mechanisms before and after particle incorporation into BC. Experimental data, analysed using first-order, Higuchi and Korsmeyer-Peppas models revealed that ATA was released from particles by a Fickian diffusion mechanism while a non-Fickian transport was observed upon particle incorporation in BC. There were no changes in the mechanical properties of BC specimens containing ATA(PMMA) particles, in contrast to what was observed when ATA was loaded directly into BC. Overall, ATA(PMMA) particles are potential carriers for the incorporation of an antioxidant drug into BC.

Lipoamino acid-based micelles as promising delivery vehicles for monomeric amphotericin B

Lipoamino acid-based micelles have been developed as delivery vehicles for the hydrophobic drug amphotericin B (AmB). The micellar solubilisation of AmB by a gemini lipoamino acid (LAA) derived from cysteine and its equimolar mixtures with the bile salts sodium cholate (NaC) and sodium deoxycholate (NaDC), as well as the aggregation sate of the drug in the micellar systems, was studied under biomimetic conditions (phosphate buffered-saline, pH 7.4) using UV-vis spectroscopy. Pure surfactant systems and equimolar mixtures were characterized by tensiometry and important parameters were determined, such as critical micelle concentration (CMC), surface tension at the CMC (γCMC), maximum surface excess concentration (Γmax), and minimum area occupied per molecule at the water/air interface (Amin). Rheological behaviour from viscosity measurements at different shear rates was also addressed. Solubilisation capacity was quantified in terms of molar solubilisation ratio (χ), micelle-water partition coefficient (KM) and Gibbs energy of solubilisation (ΔGs°). Formulations of AmB in micellar media were compared in terms of drug loading, encapsulation efficiency, aggregation state of AmB and in vitro antifungal activity against Candida albicans. The LAA-containing micellar systems solubilise AmB in its monomeric and less toxic form and exhibit in vitro antifungal activity comparable to that of the commercial formulation Fungizone.

Microcalorimetric detection of staphylococcal biofilm growth on various prosthetic biomaterials after exposure to daptomycin

Primary aim of this in vitro study was to test the efficacy of daptomycin to eradicate staphylococcal biofilms on various orthopedic implant materials. Secondary aim was to quantitatively estimate the formation of staphylococcal biofilm. We tested six clinically important biomaterials: Cobalt chrome, pure titanium, grid‐blasted titanium, porous plasma‐coated titanium with/without hydroxyapatite, and polyethylene. Biofilms of S. aureus and S. epidermidis were formed on the samples and thereafter exposed to daptomycin. Samples were subsequently sonicated in order to detect dislodged biofilm bacteria and transferred to a microcalorimeter for real‐time measurement of growth‐related heat flow. Minimal biofilm eradication concentration (MBEC) was determined as the lowest concentration of daptomycin required to eradicate biofilm bacteria on the sample. Median MBEC of S. aureus biofilm on smooth metallic surfaces was lower than the rough metallic surfaces. In experiments with S. epidermidis, no pattern was seen in relation to the surface roughness. Regarding the quantitative estimation of staphylococcal biofilm formation on the sample, we found a significantly higher amount of biofilm growth on the rough surfaces than the smooth samples and polyethylene. In conclusion, the presented study showed that daptomycin could eradicate S. aureus biofilm at lower concentrations on the smooth surfaces compared to the rough surfaces, as well as polyethylene. In experiments with daptomycin against S. epidermidis biofilms, no pattern was seen in relation to the surface roughness. Furthermore, we demonstrated a faster detection of staphylococcal heat flow due to higher biofilm quantity on the rough surfaces compared to smooth samples and polyethylene.