Inga H. Musselman

Thermal ablation of tumor cells with antibody-functionalized single-walled carbon nanotubes.

Single-walled carbon nanotubes (CNTs) emit heat when they absorb energy from near-infrared (NIR) light. Tissue is relatively transparent to NIR, which suggests that targeting CNTs to tumor cells, followed by noninvasive exposure to NIR light, will ablate tumors within the range of NIR. In this study, we demonstrate the specific binding of antibody-coupled CNTs to tumor cells in vitro, followed by their highly specific ablation with NIR light. Biotinylated polar lipids were used to prepare stable, biocompatible, noncytotoxic CNT dispersions that were then attached to one of two different neutralite avidin-derivatized mAbs directed against either human CD22 or CD25. CD22+CD25− Daudi cells bound only CNTs coupled to the anti-CD22 mAb; CD22−CD25+ activated peripheral blood mononuclear cells bound only to the CNTs coupled to the anti-CD25 mAb. Most importantly, only the specifically targeted cells were killed after exposure to NIR light.

Single-walled carbon nanotube interactions with HeLa cells

This work concerns exposing cultured human epithelial-like HeLa cells to single-walled carbon nanotubes (SWNTs) dispersed in cell culture media supplemented with serum. First, the as-received CoMoCAT SWNT-containing powder was characterized using scanning electron microscopy and thermal gravimetric analyses. Characterizations of the purified dispersions, termed DM-SWNTs, involved atomic force microscopy, inductively coupled plasma – mass spectrometry, and absorption and Raman spectroscopies. Confocal microRaman spectroscopy was used to demonstrate that DM-SWNTs were taken up by HeLa cells in a time- and temperature-dependent fashion. Transmission electron microscopy revealed SWNT-like material in intracellular vacuoles. The morphologies and growth rates of HeLa cells exposed to DM-SWNTs were statistically similar to control cells over the course of 4 d. Finally, flow cytometry was used to show that the fluorescence from MitoSOX™ Red, a selective indicator of superoxide in mitochondria, was statistically similar in both control cells and cells incubated in DM-SWNTs. The combined results indicate that under our sample preparation protocols and assay conditions, CoMoCAT DM-SWNT dispersions are not inherently cytotoxic to HeLa cells. We conclude with recommendations for improving the accuracy and comparability of carbon nanotube (CNT) cytotoxicity reports.

Specific thermal ablation of tumor cells using single-walled carbon nanotubes targeted by covalently-coupled monoclonal antibodies.

CD22 is broadly expressed on human B cell lymphomas. Monoclonal anti‐CD22 antibodies alone, or coupled to toxins, have been used to selectively target these tumors both in SCID mice with xenografted human lymphoma cell lines and in patients with B cell lymphomas. Single‐walled carbon nanotubes (CNTs) attached to antibodies or peptides represent another approach to targeting cancer cells. CNTs convert absorbed near‐infrared (NIR) light to heat, which can thermally ablate cells that have bound the CNTs. We have previously demonstrated that monoclonal antibodies (MAbs) noncovalently coupled to CNTs can specifically target and kill cells in vitro. Here, we describe the preparation of conjugates in which the MAbs are covalently conjugated to the CNTs. The specificity of both the binding and NIR‐mediated killing of the tumor cells by the MAb‐CNTs is demonstrated by using CD22+CD25− Daudi cells, CD22−CD25+ phytohemagglutinin‐activated normal human peripheral blood mononuclear cells, and CNTs covalently modified with either anti‐CD22 or anti‐CD25. We further demonstrate that the stability and specificity of the MAb‐CNT conjugates are preserved following incubation in either sodium dodecyl sulfate or mouse serum, indicating that they should be stable for in vivo use.

Amphiphilic helical peptide enhances the uptake of single-walled carbon nanotubes by living cells

The success of many projected applications of carbon nano-tubes (CNTs) to living cells, such as intracellular sensors and nanovectors, will depend on how many CNTs are taken up by cells. Here we report the enhanced uptake by HeLa cells of single-walled CNTs coated with a designed peptide termed nano-1. Atomic force microscopy showed that the dispersions were composed of individual and small bundles of nano-1 CNTs with 0.7- to 32-nm diameters and 100- to 400-nm lengths. Spectroscopic characterizations revealed that nano-1 disperses CNTs in a non-covalent fashion that preserves CNT optical properties. Elemental analyses indicated that our sample preparation protocol involving sonication and centrifugation effectively eliminated metal impurities associated with CNT manufacturing processes. We further showed that the purified CNT dispersions are taken up by HeLa cells in a time- and temperature-dependent fashion, and that they do not affect the HeLa cell growth rate, evidence that the CNTs inside cells are not toxic under these conditions. Finally, we discovered that ~6-fold more CNTs are taken up by cells in the presence of nano-1 compared with medium containing serum but no peptide. The fact that coating CNTs with a peptide enhances uptake offers a strategy for improving the performance of applications that require CNTs to be inside cells.

Platinum/iridium tips with controlled geometry for scanning tunneling microscopy

An electrochemical etching procedure using a saturated CaCl2/H2O/concentrated HCl (60%/36%/4% by volume) solution has been developed to fabricate platinum/iridium tips with controlled geometry for scanning tunneling microscopy (STM). These tips, which have a high aspect ratio (5°–10° cone half angle) and a small radius of curvature (∼500 A), are particularly useful for the imaging and metrology of precision‐engineered surfaces. Initial attempts to use the tips showed them to be unreliable for STM imaging. Auger electron spectroscopy indicated the presence of a carbon contamination layer. By eliminating CO2 from the etching environment, the contamination was reduced and the reliability of the resulting tips improved dramatically. The imaging versatility of these tips is demonstrated for sputter‐deposited gold on silicon, for a gold‐coated polymethylmethacrylate lithographic test pattern, and for highly oriented pyrolytic graphite.

Cytotoxicity screening of single-walled carbon nanotubes: detection and removal of cytotoxic contaminants from carboxylated carbon nanotubes.

This study compares the cytotoxicity to cultured mammalian cells of nine different single-walled carbon nanotube (SWNT) products synthesized by a variety of methods and obtained from a cross section of vendors. A standard procedure involving sonication and centrifugation in buffered bovine serum albumin was developed to disperse all the SWNTs in a biocompatible solution to facilitate comparisons. The effect of the SWNTs on the proliferative ability of a standard cell line was then assessed. Of the nine different SWNT materials tested, only two were significantly toxic, and both were functionalized by carboxylation from different vendors. This was unexpected because carboxylation makes SWNTs more water-soluble, which would presumably correlate with better biocompatibility. However, additional purification work demonstrated that the toxic material in the carboxylated SWNT preparations could be separated from the SWNTs by filtration. The filtrate that contained the toxic activity also contained abundant small carbon fragments that had Raman signatures characteristic of amorphous carbon species, suggesting a correlation between toxicity and oxidized carbon fragments. The removal of a toxic contaminant associated with carboxylated SWNTs is important in the development of carboxylated SWNTs for pharmacological applications.

The fibrillar hierarchy in liquid crystalline polymers

It is well known that the structure of highly oriented liquid crystalline polymers (LCPs) can be characterized by a hierarchical fibrillar structural model. Structure models were first developed for the lyotropic aramid fibres in the late 1970s and a structural model was developed for the thermotropic copolyesters in the mid-1980s. Recently, imaging techniques with higher potential capability and resolution have been applied to assess the size, shape and organization of microfibrillar structures observed in LCPs. Field emission scanning electron microscopy and scanning tunnelling microscopy permit imaging of regions from 1 nm to many micrometres. As a result, the nature of the microfibrillar hierarchy has been further clarified and the macromolecular size has been shown to be less than 2 nm. The shape of the microfibrils has been shown to be tape-like. The LCP structural model, consisting of elongated well-ordered microfibrils continues to be consistent with measured properties: high anisotropy, very high tensile modulus and strength and poor compressive properties. A more detailed structural model is proposed to describe the macromolecular microfibril size, shape and organization for comparison with polymer composition and mechanical property evaluation.

Modifying the electronic properties of single-walled carbon nanotubes using designed surfactant peptides

The electronic properties of carbon nanotubes can be altered significantly by modifying the nanotube surface. In this study, single-walled carbon nanotubes (SWCNTs) were functionalized noncovalently using designed surfactant peptides, and the resultant SWCNT electronic properties were investigated. These peptides have a common amino acid sequence of X(Valine)(5)(Lysine)(2), where X indicates an aromatic amino acid containing either an electron-donating or electron-withdrawing functional group (i.e. p-amino-phenylalanine or p-cyano-phenylalanine). Circular dichroism spectra showed that the surfactant peptides primarily have random coil structures in an aqueous medium, both alone and in the presence of SWCNTs, simplifying analysis of the peptide/SWCNT interaction. The ability of the surfactant peptides to disperse individual SWCNTs in solution was verified using atomic force microscopy and ultraviolet-visible-near-infrared spectroscopy. The electronic properties of the surfactant peptide/SWCNT composites were examined using the observed nanotube Raman tangential band shifts and the observed additional features near the Fermi level in the scanning tunneling spectroscopy dI/dV spectra. The results revealed that SWCNTs functionalized with surfactant peptides containing electron-donor or electron-acceptor functional groups showed n-doped or p-doped altered electronic properties, respectively. This work unveils a facile and versatile approach to modify the intrinsic electronic properties of SWCNTs using a simple peptide structure, which is easily adaptable to obtain peptide/SWCNT composites for the design of tunable nanoscale electronic devices.

Molecular speciation of microparticles: application of pattern recognition techniques to laser microprobe mass spectrometric data

Abstract Attempts were made to enhance the ability of laser microprobe mass spectrometry (LAMMS) to identify molecular species in individual microparticles by applying pattern recognition methods. Principal component analysis (PCA) and canonical discriminant analysis were applied to LAMMS data for nickel-containing environmental particles. Detailed comparison of the two statistical methods demonstrated the utility of PCA. The successful application was highly dependent on the use of appropriate spectral normalization and feature extraction techniques prior to PCA. Although the test system involved only a small number of standard compounds, the LAMMS data were complicated by the effects of intra-particle heterogeneity common to environmental samples and by instrumental limitations. Pattern recognition techniques provided more accurate quantitative assignments of molecular species than were available by qualitative inspection of characteristic cluster ions or by simple spectral subtraction to compare particle data with a library of standard compounds. Results were substantiated by comparison with bulk analysis studies using wet chemical techniques.

Gas Separation Membranes Derived from High-Performance Immiscible Polymer Blends Compatibilized with Small Molecules.

An immiscible polymer blend comprised of high-performance copolyimide 6FDA-DAM:DABA(3:2) (6FDD) and polybenzimidazole (PBI) was compatibilized using 2-methylimidazole (2-MI), a commercially available small molecule. Membranes were fabricated from blends of 6FDD:PBI (50:50) with and without 2-MI for H2/CO2 separations. The membranes demonstrated a matrix-droplet type microstructure as evident with scanning electron microscopy (SEM) imaging where 6FDD is the dispersed phase and PBI is the continuous phase. In addition, membranes with 2-MI demonstrated a uniform microstructure as observed by smaller and more uniformly dispersed 6FDD domains in contrast to 6FDD:PBI (50:50) blend membranes without 2-MI. This compatibilization effect of 2-MI was attributed to interfacial localization of 2-MI that lowers the interfacial energy similar to a surfactant. Upon the incorporation of 2-MI, the H2/CO2 selectivity improved remarkably, compared to the pure blend, and surpassed the Robesons upper bound. To our knowledge, this is the first report of the use of a small molecule to compatibilize a high-performance immiscible polymer blend. This approach could afford a novel class of membranes in which immiscible polymer blends can be compatibilized in an economical and convenient fashion.