Ingeborg J. De Kok

The effect of implant‐supported removable partial dentures on oral health quality of life

PURPOSE Removable partial dentures (RPDs) represent standard treatment for partial edentulism despite major shortcomings. To alleviate these shortcomings, endosseous implants provide support and stability as well as contribute to maintenance of alveolar bone. This prospective, within subject, time series study evaluated patient-based outcomes of RPDs compared to implant-supported removable partial dentures (ISRPDs). The study hypothesis was that the ISRPD would substantially improve oral health quality of life for patients. MATERIALS AND METHODS Seventeen patients requesting new mandibular Kennedy I or II RPDs received one 6-mm dental implant in one or both of the posterior edentulous areas. After healing, conventional RPDs were fabricated and delivered. Twelve weeks later, second-stage surgery was performed, and ball abutments with Clix attachments were inserted, thereby converting the prostheses to ISRPDs. Oral health quality of life was evaluated using the 49-item Oral Health Impact Profile (OHIP-49) questionnaire. The OHIP-49 was administered prior to treatment (baseline), at 6 and 12 weeks following RPD delivery and at 6 and 12 weeks following ISRPD conversion. Radiographic evaluation was performed at 6 and 12 weeks following ISRPD conversion. In statistical analysis, a fixed-slope random intercept variance components model took account of the multiple observations per person over time. RESULTS In 17 subjects, 29 of 30 implants survived. The failed implant was replaced without complications. Abutment complications were limited to one abutment loosening and one attachment replacement. Minor prosthodontic complications were recorded. The OHIP-49 score reduced by 11.8 points, on average, at 12 weeks following ISRPD conversion (P = 0.011). CONCLUSIONS Patients reported improved oral health following conversion to an ISRPD from RPD. The ISRPD involving short implants is one treatment option that should be considered when treatment planning Kennedy Class I and II patients.

Radiographic stents: integrating treatment planning and implant placement.

The pivotal point in treatment planning for dental implants occurs when the location of bone is viewed radiographically in the context of the planned prosthesis. Radiographic planning for dental implant therapy should be used only after a review of the patients systemic health, imaging history, oral health, and local oral conditions. The radiological diagnostic and planning procedure for dental implants can only be fully achieved with the use of a well-designed and -constructed radiographic guide. This article reviews several methods for construction of radiographic guides and how they may be utilized for improving implant surgery planning and performance.

Prosthodontic Management of Implant Therapy

Implant-supported dental restorations can be screw-retained, cement-retained, or a combination of both, whereby a metal superstructure is screwed to the implants and crowns are individually cemented to the metal frame. Each treatment modality has advantages and disadvantages. The use of computer-aided design/computer-assisted manufacture technologies for the manufacture of implant superstructures has proved to be advantageous in the quality of materials, precision of the milled superstructures, and passive fit. Maintenance and recall evaluations are an essential component of implant therapy. The longevity of implant restorations is limited by their biological and prosthetic maintenance requirements.

In Vivo Assessment of Bone Healing following Piezotome® Ultrasonic Instrumentation

PURPOSE This pilot study evaluated the molecular, histologic, and radiographic healing of bone to instrumentation with piezoelectric or high speed rotary (R) devices over a 3-week healing period. MATERIAL AND METHODS Fourteen Sprague-Dawley rats (Charles River Laboratories International, Inc., Wilmington, MA, USA) underwent bilateral tibial osteotomies prepared in a randomized split-leg design using Piezotome® (P1) (Satelec Acteon, Merignac, France), Piezotome 2® (P2) (Satelec Acteon), High-speed R instrumentation, or sham surgery (S). At 1 week, an osteogenesis array was used to evaluate differences in gene expression while quantitative analysis assessed percentage bone fill (PBF) and bone mineral density (BMD) in the defect, peripheral, and distant regions at 3 weeks. Qualitative histologic evaluation of healing osteotomies was also performed at 3 weeks. RESULTS At 1 week, expression of 11 and 18 genes involved in bone healing was significantly (p < .05) lower following P1 and P2 instrumentation, respectively, relative to S whereas 16 and 4 genes were lower relative to R. No differences in PBF or BMD were detected between groups within the osteotomy defect. However, significant differences in PBF (p = .020) and BMD (p = .008) were noted along the peripheral region between P2 and R groups, being R the group with the lowest values. Histologically, smooth osteotomy margins were present following instrumentation using P1 or P2 relative to R. CONCLUSIONS Piezoelectric instrumentation favors preservation of bone adjacent to osteotomies while variations in gene expression suggest differences in healing rates due to surgical modality. Bone instrumented by piezoelectric surgery appears less detrimental to bone healing than high-speed R device.

Evaluation of a collagen scaffold for cell-based bone repair.

PURPOSE To determine whether a collagen scaffold could provide an environment for mesenchymal stem cell (MSC)-related bone repair of critical-size bone defects in rat calvaria. MATERIALS AND METHODS Craniotomy defects were created in 28 adult Sprague-Dawley rats. Two additional rats were used as MSC donors by means of femoral bone marrow lavage and culture. The rats were randomly divided into four groups: (1) empty/no graft; (2) collagen scaffold (matrix)+saline; (3) matrix+MSCs; (4) matrix+bone morphogenetic protein. The animals were euthanized 28 days after surgery. Microcomputed tomographic reconstructions were obtained to measure bone fill. The specimens were processed for histologic examination, and the total defect and bone fill areas were measured. RESULTS Mean bone fill (± standard deviation) of 9.25%±10.82%, 19.07%±17.38%, 44.21%±3.93%, and 66.06%±15.08%, respectively, was observed for the four groups; the differences were statistically significant. Bone repair was statistically significant for groups 3 and 4. No significant difference was seen for bone repair between groups 1 and 2 or between groups 3 and 4. Bone formation differed significantly across the four groups. Statistically significant changes in radiodensity were observed between groups 1 and 3, groups 1 and 4, and groups 2 and 4. Significant differences were not observed between groups 1 and 2, groups 2 and 3, or groups 3 and 4. CONCLUSION After grafting of adult MSCs adherent within a collagen matrix, repair of bone was significant. Expanded three-dimensional collagen represents a radiolucent, resorbable, biocompatible scaffold that is capable of supporting MSC repair of bone.

Comparison of marginal bone changes with internal conus and external hexagon design implant systems: A prospective, randomized study

A central dental implant success criterion is the marginal bone response as measured longitudinally. Factors that influence marginal bone changes include osseous and soft tissue architecture, occlusal loading factors, implant position, implant design, and inflammatory processes. The evolution of implant design is multifactorial and includes the implant-abutment interface geometries. The primary objective of this study was to compare the proximal marginal bone changes following placement and loading of internal conus design implants (ICI) and external hex design implants (EXI) used in the treatment of posterior partial edentulism. Among 45 enrolled participants, 39 were treated with 47 ICI or 46 EXI implants using a one-stage implant protocol. Prosthetic restoration was completed after 12 weeks using stock titanium abutments and all-ceramic crowns. Follow-up visits including clinical and radiographic examinations were performed 6 months after permanent restoration and then annually for 3 years. Marginal bone level changes, papilla index scores, condition of the peri-implant mucosa, presence of complications, and participant satisfaction were evaluated. The mean marginal bone level change from implant placement to 3 years was -0.25 ± 0.60 mm and -0.5 ± 0.93 mm for ICI and EXI implants, respectively. The change recorded from permanent restoration to 3 years was a gain of 0.31 ± 0.41 mm versus 0.04 ± 0.51 mm for ICI and EXI implants, respectively (P < .05). In the evaluation of interproximal soft tissue 3 years after permanent restoration, 80% of mandibular and 66% of maxillary interproximal ICI sites received papilla scores of 2 and 3, compared with 50% of mandibular and 60% of maxillary interproximal EXI sites. No significant differences in plaque or bleeding scores were recorded. Abutment/healing abutment complications were recorded for 11 EXI versus 1 ICI participant. The vast majority (> 90%) of participants stated they were satisfied or very satisfied with their implant prosthesis and rated function and esthetics highly for both implant types after 3 years in function. Modestly greater marginal bone loss occurred at EXI implants. Further, more positive papilla scores were found between adjacent ICI implants than between adjacent EXI implants. EXI implants displayed more abutment complications than the ICI implants. The implant-abutment interface design may contribute to therapeutic outcome differences. Replacement of missing posterior teeth with unsplinted implants was successful at the implant level and as reported by the participant.

Factors Influencing Removable Partial Denture Patient-Reported Outcomes of Quality of Life and Satisfaction: A Systematic Review.

PURPOSE A systematic search of the literature was performed to identify and characterize articles reporting the influence of removable partial denture (RPD) therapy on satisfaction and quality of life (QoL). MATERIALS AND METHODS The literature search for relevant articles published between January 1983 and March 30, 2013 was conducted using keyword searches of electronic databases and complimentary hand searches. The search strategy included the following keyword combinations (MeSH and free-text terms): fail, complication, surviv*, longevity, outcome, patient satisfaction or QoL, and denture or prosthes*, and partial and removable. Based on inclusion and exclusion criteria, articles focused on the effect of RPD therapy were reviewed and classified according to Strength-of-Recommendation Taxonomy (SORT) criteria. RESULTS The combined search identified 997 publications; 198 duplicates were identified and removed, leaving 799 references for further evaluation. After abstract review, 209 articles were selected and read; 18 reports representing findings from 4002 patients were included. While two studies were prospective comparative investigations, the majority of studies represented cross-sectional and retrospective studies. Different instruments were used to measure oral health-quality of life (OHQoL) and satisfaction. Several investigations reported a significant association of satisfaction and QoL with either (a) age of the patient, (b) number of occluding dental units replaced, (c) replacement of anterior teeth, and (d) nature of the opposing arch. CONCLUSIONS A paucity of detailed investigations concerning outcomes of RPD therapy was noted. Improvement in OHQoL or satisfaction following provision of RPDs was not consistently reported. There is little evidence supporting any association between patient-reported QoL or satisfaction with technical or biological parameters of therapy. Therapeutic success of tooth replacement using RPDs should be carefully considered and compared with alternatives.

Patient Selection and Treatment Planning for Implant Restorations

Dental implants are an indispensible tool for the restoration of missing teeth. Their use has elevated the practice of dentistry by improving both our technical ability to rehabilitate patients and general quality of life. To routinely achieve the associated high expectations, diligent attention to details must be observed and addressed from the outset. Of central concern is the attainment of osseointegration and the location of implants to ideally support the intended restoration. The pivotal point in treatment planning for dental implants occurs when the location of bone is viewed radiographically in the context of the planned prosthesis. This most often requires diagnostic waxing or tooth arrangement using mounted diagnostic casts.

Molecular assessment of human peri-implant mucosal healing at laser-modified and machined titanium abutments

PURPOSE To compare, by gene profiling analysis, the molecular events underscoring peri-implant mucosa formation at machined vs laser-microgrooved implant healing abutments. MATERIALS AND METHODS Forty endosseous implants were placed by a one-stage approach in 20 healthy subjects in nonadjacent sites for single-tooth restorations. In a split-mouth design, machined smooth and laser-microgrooved healing abutments were randomly assigned in each subject. Peri-implant mucosa adjacent to healing abutments was harvested by tissue punch biopsy at either 1, 2, 4, or 8 weeks following abutment placement. Total RNA was isolated from the peri-implant transmucosal soft tissues. A whole genome microarray using the Affymetrix Human Gene 2.1 ST Array was performed to describe gene expression profiles in relation to abutment topography and healing time duration. Data analysis was completed using GeneSpring software v.12.6. RESULTS Differential gene expression was revealed at all time points and among surfaces. Five hundred one genes were differentially expressed (fold change ≥ 2.0) at machined versus laser-modified abutments, and 459 of these were statistically significant (P ≤ .05). At 1 week, unique expression of IL-24 and MMP1 was observed in tissues from laser-treated surfaces. At 2, 4, and 8 weeks, mRNAs encoding keratins and protective proteins of cornified epithelium were upregulated in tissues from laser-modified abutments. At 4 weeks, upregulation (> 2-fold) of mRNAs encoding proteins associated with collagen fibril formation and function was observed in tissue from laser-modified abutments. In both tissues of machined and laser-modified abutments, mRNAs encoding junctional epithelium-specific proteins, ostogenic ameloblast associated protein (ODAM) and follicular dendritic cell secreted protein (FDCSP) were highly upregulated throughout weeks 2 to 8. CONCLUSION Peri-implant abutment mucosal wound healing involves selective differentiation of epithelium and induction of the junctional epithelium. Laser-mediated alterations in abutment topography enhance collagen fibril-associated gene expression and alter epithelium/junctional epithelial gene expression. Clinically, shallower probing depths are measured at laser-mediated versus machined implant abutments.

CAD/CAM Custom Abutments for Esthetic Anterior Implant-Supported Restoration: Materials and Design

Purpose of ReviewThe purpose of this review is to discuss the use of computer-aided design and computer-aided manufacturing (CAD/CAM) custom abutments in the anterior region with a focus on abutment design and material selection. Advantages, disadvantages, and complications of CAD/CAM abutments are also considered.Recent FindingsCAD/CAM abutments are available in various materials and with different connection platforms to the implant in order to meet esthetic, functional, and biological demands. Use of CAD/CAM concepts in the fabrication of custom abutments allows for definite advantages over both stock abutments and conventional cast custom abutments.SummaryCAD/CAM technology should be considered when restoring dental implants in the esthetic zone.