Inseok Lee

Relationships between subjective and objective measures in assessing postural stresses

The purpose of this study is to investigate the relationships between subjective measures of discomfort and objective measures related to the assessment of postural stresses based on literature survey. Objective measures included posture holding time, maximum holding time (MHT), torque at joints, lifting index (LI) and compressive force (CF) at L5/S1. The major relationships identified in this literature survey were the following: 1) postural discomfort linearly increased with increasing holding time, and holding force, 2) whole body discomfort was inversely linearly proportional to the MHT, 3) body-part discomfort was related to objective measures such as torque at the relevant joint, 4) discomfort was strongly linearly related to LIs and CFs, and 5) the discomfort measured with the magnitude estimation was linearly related to that measured with Borg CR10. Thus, it is thought that discomfort might be used as a measure for quantifying postural stresses.

Quantitative postural load assessment for whole body manual tasks based on perceived discomfort

Many Korean workers are exposed to repetitive manual tasks or prolonged poor working postures that are closely related to back pain or symptoms of musculoskeletal disorders. Workers engage in tasks that require not only handling of heavy materials, but also assuming prolonged or repetitive non-neutral work postures. Poor work postures that have been frequently observed in the workplaces of shipbuilding shops, manufacturing plants, automobile assembly lines and farms often require prolonged squatting, repetitive arm raising and wrist flexion and simultaneous trunk flexion and lateral bending. In most manufacturing industries, workers have to assume improper work postures repetitively, several hundreds of times per day depending on daily production rate. A series of psychophysical laboratory experiments were conducted to evaluate the postural load at various joints. A postural load assessment system was then developed based on a macro-postural classification scheme. The classification scheme was constructed based on perceived discomfort for various joint motions as well as previous research outcomes. On the basis of the perceived discomfort, postural stress levels for the postures at individual joints were also defined by a ratio scale to the standing neutral posture. Laboratory experiments simulating automobile assembly tasks were carried out to investigate the relationship between body-joint and whole-body discomfort. Results showed a linear relationship between the two types of discomfort, with the shoulder and low back postures being the dominant factor in determining the whole body postural stresses. The proposed method was implemented into a computer software program in order to automate the procedure of analysing postural load and to enhance usability and practical applicability.

Relationship between prolonged standing and symptoms of varicose veins and nocturnal leg cramps among women and men

The relationships between occupational characteristics and symptoms of varicose veins and nocturnal leg cramps and their gender differences were explored in a Korean population. The study population was 2165 workers from various occupations (55.6% female). Multiple logistic regression analyses were conducted to reveal factors related to symptoms of varicose veins and nocturnal leg cramps. The prevalence of varicose veins and nocturnal leg cramps was higher among women than men. The characteristics of standing work were different according to gender. In gender stratified analysis, the odds ratio of varicose veins was significantly high for prolonged standing for male and female workers. However, the odds ratio of nocturnal leg cramps was only significant among prolonged standing male workers. The models including gender, prolonged standing and occupations in this order presented that gender is not significantly associated with varicose veins after occupations were added to the model. Prolonged standing at work may be a more important risk factor for varicose veins and nocturnal leg cramps than biological differences between women and men. Therefore, effective interventions to interrupt or reduce prolonged standing at work should be implemented for the prevention of varicose veins and nocturnal leg cramps. Practitioner Summary: This paper shows associations between occupational characteristics and symptoms of varicose veins and nocturnal leg cramps and their gender differences. These findings will contribute to knowledge of gender-specific occupational risk factors for symptoms in the distal lower extremities.

The effects of age, viewing distance, display type, font type, colour contrast and number of syllables on the legibility of Korean characters.

This study evaluated the effects of age (20s and 60s), viewing distance (50 cm, 200 cm), display type (paper, monitor), font type (Gothic, Ming), colour contrast (black letters on white background, white letters on black background) and number of syllables (one, two) on the legibility of Korean characters by using the four legibility measures (minimum letter size for 100% correctness, maximum letter size for 0% correctness, minimum letter size for the least discomfort and maximum letter size for the most discomfort). Ten subjects in each age group read the four letters presented on a slide (letter size varied from 80 pt to 2 pt). Subjects also subjectively rated the reading discomfort of the letters on a 4-point scale (1 = no discomfort, 4 = most discomfort). According to the ANOVA procedure, age, viewing distance and font type significantly affected the four dependent variables (p < 0.05), while the main effect of colour contrast was not statistically significant for any measures. Two-syllable letters had smaller letters than one-syllable letters in the two correctness measures. The younger group could see letter sizes two times smaller than the old group could and the viewing distance of 50 cm showed letters about three times smaller than those at a 200 cm viewing distance. The Gothic fonts were smaller than the Ming fonts. Monitors were smaller than paper for correctness and maximum letter size for the most discomfort. From a comparison of the results for correctness and discomfort, people generally preferred larger letter sizes to those that they could read. The findings of this study may provide basic information for setting a global standard of letter size or font type to improve the legibility of characters written in Korean. Statement of Relevance: Results obtained in this study will provide basic information and guidelines for setting standards of letter size and font type to improve the legibility of characters written in Korean. Also, the results might offer useful information for people who are working on design of visual displays.

Evaluation of Main Factors Affecting on the Legibility of One-Syllable Korean Characters and Numbers

ABSTRACT The purpose of this study was to evaluate the legibility of on e-syllable Korean characters with the participation of sixteen subjects. The experiment considered nine factors including age (young and old), gender (male and female), illuminance (150lx and 600lx), viewing distance (50cm and 200cm), material type (paper and LCD), typeface (Ming and Gothic), thickness (plain and bold), color contrast (black letter/white background and white letter/black background), and complexity (simple, complex, and number) to examine main effects with a 2 6-3 ×3 fractional factorial design. The dependent variables were minimum character size of 100% correctness, maximum character size of 0% correctness, and minimum character size of comfortable reading preference. The results of analysis of variance (ANOVA) revealed that age, illuminance, viewing distance and complexity were significant for all dependent variables, except gender which was significant only for the minimum character size of comfortable reading preference. In general, the young could see twofold smaller size letters than the elderly. The subjects could see smaller sized letters with the illuminance of 600lx and viewing distance of 50cm than 150lx and 200cm, respectively and also with numbers, simple char acters, and complex characters in that order. The findings of this study could be characterized about the legibility of Ko rean characters and be good resources for developing its standar d. Keyword: Legibility, Korean, Legible ch aracter size, One-syllable, Number

Relationship of EMG and Subjective Discomfort Ratings for Repetitive Handling of Lightweight Loads

Objective: The aim of this study is to evaluate the effect of weight of load and time on the physical workload of repetitive upper-limb tasks with handling light weight loads using EMG and perceived discomfort, and to investigate the relationship between EMG and perceived discomfort for those repetitive tasks of moving light weight loads. Background: Repetitive upper-limb motion is known as one of the main risk factors of musculoskeletal disorders, and a lot of repetitive tasks are carried out while handling light weight loads in the industry. In evaluating the workload of repetitive tasks handling light weight loads, EMG and perceived discomfort can be used, though their relationship in those work conditions are not much investigated. Method: A laboratory experiment with 18 healthy males were conducted to record EMG signals from 5 muscle sites of the right arm and shoulder and rate perceived discomforts for the body parts and the whole body while carrying out repetitive materials-handling tasks for 52min. The subjects were divided into 3 groups which handled the loads of 1kg, 2kg and 3kg, respectively. ANOVAs were conducted to analyze the effects of the weight and time on RMS of EMG amplitude (normalized RMS: NRMS), median frequency of power spectrum of EMG (normalized MDF: NMDF) and perceived discomfort. The correlations between NRMS and NMDF and perceived discomfort were also analyzed. Results: Statistically significant muscular fatigue effects were not found from NRMS and NMDF in most muscles, while there were significant increases of discomfort as the task time elapsed. It was shown that there were an increasing trend of the muscular activity as the weight of load increased and a decreasing trend of median frequency of EMG of upper and lower arms as time elapsed. It was found that there were significant negative correlations between NMDFs from the lower arm and discomfort ratings, though the relationships were weak. Conclusion: It can be concluded that the working conditions adopted in this study were not enough to induce muscular fatigue, while there was significant increase in perceived discomfort. A further study is necessary to integrate the objective and subjective measures for more reliable and sensitive evaluation of workload of repetitive tasks of handling light weight loads. Application: This study can be used as a basic study for the evaluation of workload of repetitive tasks handling light weight loads.

Comparison of observational posture evaluation methods based on perceived discomfort

Observational methods such as OWAS, RULA, and REBA have been widely used to identify posture-related risks of musculoskeletal disorders in industry, since they are useful and efficient in evaluating postural stresses. However. there are few studies comparing the methods and providing guidelines for selecting and using the methods. They have been developed based on different backgrounds and with different application areas. Each method has its own characteristics. which must be considered in selecting and using them. In this study. 17 male subjects evaluated 42 different working postures that frequently assumed in the automobile assembly line using a psychophysical method. The postures were then evaluated by different observational methods. The results of the observational methods were compared with psychophysically evaluated stresses. The observational methods resulted in different values of stresses for certain postures. For some postures showing high values of perceived discomfort. the observational methods showed different values of stresses. These results showed that the observational methods should be used differently according to application area and they have some weak points to be improved.

Ergonomics Job Hazard Evaluation of Building Cleaners

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.

40 Years of Ergonomics in Korea : Accomplishments, Challenges and 40 More Years Ahead

Hongik UniversityFor the commemoration of 40 years of Industrial Engineering in Korea, Ergonomics in Korea for the last 40 years are presented in this paper. Historical backgrounds, past achievements, and key historical landmarks are explained and analyzed. In addition, a keyword content analyses on the 1,005 titles from the research paper published from 1983 to 2014 are conducted to display the structural patterns of the changes of research focus of the ergonomics in Korea. Finally, some important perspectives with regard to the prospects for the future of ergonomics in Korea are also summarized.

Analysis of Cases of Ergonomic Improvements of Agricultural Work Support Equipments

Objective: The objective of this study is to present varying cases of ergonomic improvements in equipments for agricultural work. Background: In Korean agricultural sector, many older people and females, who may be more vulnerable to musculoskeletal diseases than young males, are doing high stressful tasks such as manual materials tasks, harvesting, etc. For reducing the work stress of the farmers, the Korean government has been performing support projects to provide the farmers with agricultural implements specified for their crops. In the projects, ergonomics experts have participated and helped modify the equipments. Method: Fifty cases of equipment improvements, which were carried out in 33 farming organizations cultivating 13 different crops, were reviewed and presented by equipments and their parts. Results: In total, 283 cases of improvements for 12 equipments including 4-wheel, 1-wheel, and 3-wheel powered carts, grass cutter, conveyer, pest control machine, and so on, were presented. The improvements were also classified according to the ergonomic principles like compatibility, ease of use, safety and fitting to the anthropometry, etc. Frequencies of improvements by equipment and its part were the highest in carts and controls, respectively. Principles of safety and ease of use were adopted more frequently in improving equipments than others. Conclusion: The tables of examples of improvements of agricultural implements are main results of this study and the systematical summaries are expected to be widely used in the development of more improved agricultural implements. Application: The results could be used as practical guidelines in ergonomically developing and modifying agricultural implements by both the experts and non-experts in ergonomics. The improvements would contribute to reduction of stress in farm work, which result in increasing the level of safety and health of Korean agricultural society.