Irene Suarez-Martinez

Carbon nanotubes randomly decorated with gold clusters: from nano2hybrid atomic structures to gas sensing prototypes.

Carbon nanotube surfaces, activated and randomly decorated with metal nanoclusters, have been studied in uniquely combined theoretical and experimental approaches as prototypes for molecular recognition. The key concept is to shape metallic clusters that donate or accept a fractional charge upon adsorption of a target molecule, and modify the electron transport in the nanotube. The present work focuses on a simple system, carbon nanotubes with gold clusters. The nature of the gold-nanotube interaction is studied using first-principles techniques. The numerical simulations predict the binding and diffusion energies of gold atoms at the tube surface, including realistic atomic models for defects potentially present at the nanotube surface. The atomic structure of the gold nanoclusters and their effect on the intrinsic electronic quantum transport properties of the nanotube are also predicted. Experimentally, multi-wall CNTs are decorated with gold clusters using (1) vacuum evaporation, after activation with an RF oxygen plasma and (2) colloid solution injected into an RF atmospheric plasma; the hybrid systems are accurately characterized using XPS and TEM techniques. The response of gas sensors based on these nano(2)hybrids is quantified for the detection of toxic species like NO(2), CO, C(2)H(5)OH and C(2)H(4).

Mechanism for the Amorphisation of Diamond

The breakdown of the diamond lattice is explored by ion implantation and molecular dynamics simulations. We show that lattice breakdown is strain-driven, rather than damage-driven, and that the lattice persists until 16% of the atoms have been removed from their lattice sites. The figure shows the transition between amorphous carbon and diamond, with the interfaces highlighted with dashed lines.

The Role of Oxygen at the Interface between Titanium and Carbon Nanotubes

We study the interface between carbon nanotubes (CNTs) and surface-deposited titanium using electron microscopy and photoemission spectroscopy, supported by density functional calculations. Charge transfer from the Ti atoms to the nanotube and carbide formation is observed at the interface which indicates strong interaction. Nevertheless, the presence of oxygen between the Ti and the CNTs significantly weakens the Ti-CNT interaction. Ti atoms at the surface will preferentially bond to oxygenated sites. Potential sources of oxygen impurities are examined, namely oxygen from any residual atmosphere and pre-existing oxygen impurities on the nanotube surface, which we enhance through oxygen plasma surface pre-treatment. Variation in literature data concerning Ohmic contacts between Ti and carbon nanotubes is explained via sample pre-treatment and differing vacuum levels, and we suggest improved treatment routes for reliable Schottky barrier-free Ti-nanotube contact formation.

A comparative study of density functional and density functional tight binding calculations of defects in graphene

The density functional tight binding approach (DFTB) is well adapted for the study of point and line defects in graphene based systems. After briefly reviewing the use of DFTB in this area, we present a comparative study of defect structures, energies and dynamics between DFTB results obtained using the dftb+ code, and density functional results using the localised Gaussian orbital code, AIMPRO. DFTB accurately reproduces structures and energies for a range of point defect structures such as vacancies and Stone-Wales defects in graphene, as well as various unfunctionalised and hydroxylated graphene sheet edges. Migration barriers for the vacancy and Stone-Wales defect formation barriers are accurately reproduced using a nudged elastic band approach. Finally we explore the potential for dynamic defect simulations using DFTB, taking as an example electron irradiation damage in graphene.

Bromination of graphene and graphite

We present a density functional theory study of low density bromination of graphene and graphite, finding significantly different behaviour in these two materials. On graphene we find a new Br2 form where the molecule sits perpendicular to the graphene sheet with an extremely strong molecular dipole. The resultant Br+-Br- has an empty pz-orbital located in the graphene electronic pi-cloud. Bromination opens a small (86meV) band gap and strongly dopes the graphene. In contrast, in graphite we find Br2 is most stable parallel to the carbon layers with a slightly weaker associated charge transfer and no molecular dipole. We identify a minimum stable Br2 concentration in graphite, finding low density bromination to be endothermic. Graphene may be a useful substrate for stabilising normally unstable transient molecular states.

Study of the Interface between Rhodium and Carbon Nanotubes

X-ray photoelectron spectroscopy at 3.5 keV photon energy, in combination with high-resolution transmission electron microscopy, is used to follow the formation of the interface between rhodium and carbon nanotubes. Rh nucleates at defect sites, whether initially present or induced by oxygen-plasma treatment. More uniform Rh cluster dispersion is observed on plasma-treated CNTs. Experimental results are compared to DFT calculations of small Rh clusters on pristine and defective graphene. While Rh interacts as strongly with the carbon as Ti, it is less sensitive to the presence of oxygen, suggesting it as a good candidate for nanotube contacts.

The di-interstitial in graphite

Di-interstitial defects appear to play a key role in the microscopic understanding of radiation-induced damage in graphite. Their formation has been invoked as both one of the main causes of dimensional change and as an energy releasing step in annealing cryogenic radiation-induced damage. In the present work, first principles calculations are employed to examine several models for these defects. Two of the structures possess nearly equal energy, yet take very different forms. The results suggest that di-interstitial defects cannot play the principal role in radiation damage that has been assigned to them. The possibility that one of the structures may exhibit ferromagnetism is also investigated.

Fluid dynamic lateral slicing of high tensile strength carbon nanotubes.

Lateral slicing of micron length carbon nanotubes (CNTs) is effective on laser irradiation of the materials suspended within dynamic liquid thin films in a microfluidic vortex fluidic device (VFD). The method produces sliced CNTs with minimal defects in the absence of any chemical stabilizers, having broad length distributions centred at ca 190, 160 nm and 171 nm for single, double and multi walled CNTs respectively, as established using atomic force microscopy and supported by small angle neutron scattering solution data. Molecular dynamics simulations on a bent single walled carbon nanotube (SWCNT) with a radius of curvature of order 10 nm results in tearing across the tube upon heating, highlighting the role of shear forces which bend the tube forming strained bonds which are ruptured by the laser irradiation. CNT slicing occurs with the VFD operating in both the confined mode for a finite volume of liquid and continuous flow for scalability purposes.

Effect of microstructure on the thermal conductivity of disordered carbon

Computational methods are used to control the degree of structural order in a variety of carbon materials containing primarily sp2 bonding. Room-temperature thermal conductivities are computed using non-equilibrium molecular dynamics. Our results reproduce experimental data for amorphous and glassy carbons and confirm previously proposed structural models for vitreous carbons. An atomistic model is developed for highly oriented thin films seen experimentally, with a maximum computed thermal conductivity of 35 W m−1 K−1. This value is much higher than that of the amorphous and glassy structures, demonstrating that the microstructure influences the thermal conductivity more strongly than the density.

Spectroscopy and Defect Identification for Fluorinated Carbon Nanotubes

Finely tuned: Carbon nanotubes are exposed to a CF(4) radio-frequency plasma (see picture). High-resolution photoelectron spectroscopy shows that the treatment effectively grafts fluorine atoms onto the MWCNTs, altering the valence electronic states. Fluorine surface concentration can be tuned by varying the exposure time.Multi-wall carbon nanotubes (MWCNTs) were exposed to a CF(4) radio-frequency (rf) plasma. High-resolution photoelectron spectroscopy shows that the treatment effectively grafts fluorine atoms onto the MWCNTs, altering the valence electronic states. Fluorine surface concentration can be tuned by varying the exposure time. Evaporation of gold onto MWCNTs is used to mark active site formation. High-resolution transmission electron microscopy coupled with density functional theory (DFT) modelling is used to characterise the surface defects formed, indicating that the plasma treatment does not etch the tube surface. We suggest that this combination of theory and microscopy of thermally evaporated gold atoms onto the CNT surface may be a powerful approach to characterise both surface defect density as well as defect type.