Isabel C. S. Carvalho

Cholesteric Liquid-Crystal Laser as an Optic Fiber-Based Temperature Sensor

In this work, we have studied the temperature dependence of a cholesteric liquid-crystal laser coupled to an optical fiber, with a view towards optical fiber sensor applications. To stabilize the laser emission, we developed a procedure to align the liquid crystal placed in the fiber. Unexpected oscillations in the laser emission were observed as the temperature was varied, which can be understood in terms of the competition between bulk and surface anchoring torques.

Inducing a large second-order optical nonlinearity in soft glasses by poling

Electrothermal poling of soft glasses (soda lime and borosilicate glass) at relatively high currents led to the creation of a second-order optical nonlinearity. The second-harmonic generation efficiency decays in time, and the decay rate can be accelerated by exposure to intense infrared radiation.

Depletion region in thermally poled fused silica

The depletion-layer width and the recorded electric field in thermally poled fused silica are investigated experimentally as a function of the applied voltage. The depletion-layer width is observed to vary linearly with the poling voltage. The average electric field recorded in the depletion region was found to be (5.3±0.3)×108 V/m for all samples, independently of the poling voltage.

All-fiber devices based on photonic crystal fibers with integrated electrodes

A special kind of microstructured optical fiber is proposed and fabricated in which, in addition to the holey region (solid core and silica-air cladding), two large holes exist for electrode insertion. Either Bi-Sn or Au-Sn alloys were selectively inserted into the large holes forming two parallel, continuous and homogeneous internal electrodes. We demonstrate the production of a monolithic device and its use to externally control some of the guidance properties (e. g. polarization) of the fiber.

Third-order nonlinear optical properties of bismuth-borate glasses measured by conventional and thermally managed eclipse Z scan

Third-order nonlinearity one order of magnitude larger than silica is measured in bismuth-borate glasses presenting a fast response (<200 fs). The results for the sign and magnitude of the nonlinearity were obtained using a combination of the eclipse Z scan with thermal nonlinearity managed Z scan, whereas the Kerr shutter technique was employed to obtain the electronic time response of the nonlinearity, all performed with 76 MHz repetition rate 150 fs pulses at 800 nm. Conventional Z scans in the picosecond regime at 532 and 1064 nm were also independently performed, yielding the values of the third-order nonlinear susceptibilities at those wavelengths. The results obtained for the femtosecond response, enhanced third-order nonlinearity of this glass (with respect to silica), place this glass system as an important tool in the development of photonics devices. Electro-optical modulators, optical switches, and frequency converters are some of the applications using second-order nonlinear properties of the Bi-glass based on the rectification model.

Dengue immunoassay with an LSPR fiber optic sensor.

Dengue fever is a viral disease that affects millions of people worldwide. Specific tests for dengue are not usually performed due to high costs, complicated procedures and, in some cases, long time to yield a result. For widespread use of specific tests to be possible, fast, reliable and fairly simple methods are needed. In this paper, we present a new dengue diagnostic method for the acute phase of the infection. The method proposed uses an all-optical fiber sensor based on Localized Surface Plasmon Resonance (LSPR) and specular reflection from gold nanoparticles (AuNPs). Dengue anti-NS1 antibody was immobilized on AuNPs deposited on the endface of a standard multimode fiber (62.5 µm/125 µm). The sensor is able to detect NS1 antigen at different concentrations, with limit of quantification estimated to be 0.074 μg/ml = 1.54 nM. These results indicate that the sensor could potentially be used for dengue diagnosis in the acute phase of the infection.

Hydrostatic Pressure Sensing with High Birefringence Photonic Crystal Fibers

The effect of hydrostatic pressure on the waveguiding properties of high birefringence photonic crystal fibers (HiBi PCF) is evaluated both numerically and experimentally. A fiber design presenting form birefringence induced by two enlarged holes in the innermost ring defining the fiber core is investigated. Numerical results show that modal sensitivity to the applied pressure depends on the diameters of the holes, and can be tailored by independently varying the sizes of the large or small holes. Numerical and experimental results are compared showing excellent agreement. A hydrostatic pressure sensor is proposed and demonstrated using an in-fiber modal interferometer where the two orthogonally polarized modes of a HiBi PCF generate fringes over the optical spectrum of a broad band source. From the analysis of experimental results, it is concluded that, in principle, an operating limit of 92 MPa in pressure could be achieved with 0.0003% of full scale resolution.

Low loss photonic components in high index bismuth borate glass by femtosecond laser direct writing

Single mode, low loss waveguides were fabricated in high index bismuth borate glass by femtosecond laser direct writing. A specific set of writing parameters leading to waveguides perfectly mode matched to standard single-mode fibers at 1.55 microm with an overall insertion loss of approximately 1 dB and with propagation loss below 0.2 dB/cm was identified. Photonic components such as Y-splitters and directional couplers were also demonstrated. A close agreement between their performances and theoretical predictions based upon the characterization of the waveguide properties is shown. Finally, the nonlinear refractive index of the waveguides has been measured to be 6.6 x 10(-15) cm(2)/W by analyzing self-phase modulation of the propagating femtosecond laser pulse at the wavelength of 1.46 microm. Broadening of the transmitted light source as large as 500 nm was demonstrated through a waveguide with the length of 1.8 cm.

Strong upconversion from Er3Al5O12 ceramic powders prepared by low temperature direct combustion synthesis

Crystalline ceramic powders of Er3Al5O12 were obtained by low temperature direct combustion synthesis. Irradiating the sample with a low-power continuous-wave infrared (1.48 mu m) diode laser led t ...

Time evolution of depletion region in poled silica

The electric field recorded in silica samples thermally poled during various intervals was measured by etching. The field is nearly uniform and increases to a maximum (∼3.6×108 V/m) in few minutes of poling and subsequently decreases slowly toward a steady level (∼1.4×108 V/m). The depletion layer becomes neutral even before the field reaches steady state. An upper limit of (0.7±0.2) μm was found for the thickness of the negatively charged edge of the depletion region. The value of χ(3) is the same for all poling times.