Isabel Cristina Sales Fontes Jardim

Validação em métodos cromatográficos e eletroforéticos

The validation of an analytical method is fundamental to implementing a quality control system in any analytical laboratory. As the separation techniques, GC, HPLC and CE, are often the principal tools used in such determinations, procedure validation is a necessity. The objective of this review is to describe the main aspects of validation in chromatographic and electrophoretic analysis, showing, in a general way, the similarities and differences between the guidelines established by the different Brazilian and international regulatory agencies.The validation of an analytical method is fundamental to implementing a quality control system in any analytical laboratory. As the separation techniques, GC, HPLC and CE, are often the principal tools used in such determinations, procedure validation is a necessity. The objective of this review is to describe the main aspects of validation in chromatographic and electrophoretic analysis, showing, in a general way, the similarities and differences between the guidelines established by the different Brazilian and international regulatory agencies.

Use of solid-phase extraction and high-performance liquid chromatography for the determination of triazine residues in water: validation of the method.

A method for determination of some triazine residues in water has been developed. The method involves concentration with C18 solid-phase extraction cartridges followed by high-performance liquid chromatographic analysis using a C18 column with UV detection at 230 nm, a mobile phase of methanol-water (60:40, v/v) at pH 4.6 (phosphoric acid) and a flow-rate of 0.8 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method can be used for determination of atrazine, simazine, cyanazine and ametryn in water, within the international limits of 0.1 microg/l.

Métodos de extração e/ou concentração de compostos encontrados em fluidos biológicos para posterior determinação cromatográfica

When organic compounds present in biological fluids are analysed by chromatographic methods, it is generally necessary to carry out a prior sample preparation due the high complexity of this type of sample, especially when the compounds to be determinated are found in very low concentrations. This article describes some of the principal methods for sample preparation in analyses of substances present in biological fluids. The methods include liquid-liquid extraction, solid phase extraction, supercritical fluid extraction and extraction using solid and liquid membranes. The advantages and disadvantages of these methods are discussed.

New generation of sterically protected C18 stationary phases containing embedded urea groups for use in high-performance liquid chromatography

New monofunctional C18 urea stationary phases with sterically protecting dimethyl and diisopropyl groups were prepared by a single step modification process. ProntoSil spherical silica (3 microm) was chemically modified with the monofunctional ethoxysilanes, [(3-octadecylurea)propyl]dimethyl and [(3-octadecylurea)propyl]diisopropyl ethoxysilanes. The phases were characterized by elemental analysis, infrared and solid-state 29Si and 13C NMR spectroscopies. Chromatographic characterizations of the new phases in 50x3.9 mm HPLC columns were performed by the separation of two different test mixtures, containing nonpolar, polar and highly basic compounds.

Development of new urea-functionalized silica stationary phases: Characterization and chromatographic performance

New urea-functionalized silica stationary phases were prepared by a single-step surface modification through reaction of LiChrosorb Si100 (5 microm particle size) with a homologous series of alkoxysilanes, synthesized in our laboratory, with the general formula (CH3CH2O)3Si(CH2)3NHC(O)NH(CH2)nCH3, where n=4, 6 and 11. The modified silicas were characterized by elemental analysis of carbon and nitrogen, solid-state 29Si- and 13C-cross polarization magic angle spinning nuclear magnetic resonance and nitrogen adsorption isotherms at 77 K. Chromatographic evaluation of the three urea-functionalized silicas in 150x3.9 mm I.D. HPLC columns was carried out by the separation of a test mixture composed of uracil, acetophenone, benzene, toluene and naphthalene, using acetonitrile-water as mobile phase. These new stationary phases, with embedded polar urea groups, are very promising when compared with amide phases prepared by the conventional two-step modification process. A single-step reaction process silica modification is better for obtaining a well-characterized and homogeneous modified surface.

A simple hollow fiber renewal liquid membrane extraction method for analysis of sulfonamides in honey samples with determination by liquid chromatography–tandem mass spectrometry

A sensitive and precise analysis using hollow fiber renewal liquid membrane (HFRLM) extraction followed by high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) is described for determination of five sulfonamides in honey samples. In this procedure, the organic solvent introduced directly into the sample matrix extracts the sulfonamides and carries them over the polypropylene porous membrane. An organic solvent is immobilized inside the polypropylene porous membrane, leading to a homogeneous phase. The stripping phase at higher pH in the lumen of the membrane promotes the ionization of the target compounds releasing them to this phase. The most important parameters affecting the extraction efficiency were optimized by multivariable designs (pH and sample mass, pH and buffer for stripping phase, extraction temperature and time, type and volume of extractor solvent and use of salt to saturate the sample). Detection limits in the range of 5.1-27.4 μg kg(-1) and linearity coefficient of correlation higher than 0.987 were obtained for the target analytes. The results obtained for the proposed method show that HFRLM-LC-MS/MS can be used for determination of the five sulfonamides studied in honey samples with excellent precision, accuracy, practicality and short analysis time.

Multiresidue determination of pesticides in industrial and fresh orange juice by hollow fiber microporous membrane liquid–liquid extraction and detection by liquid chromatography–electrospray-tandem mass spectrometry

A procedure involving hollow fiber microporous membrane liquid-liquid extraction (HF-MMLLE) and detection by liquid chromatography with tandem mass spectrometry was developed and applied. The extraction is based on liquid-liquid microextraction with a polypropylene porous membrane as a solid support for the solvent. On the membrane walls the solvent forms a renewable liquid membrane which improves the trueness of the method and promotes the sample clean-up. The applicability of this method was evaluated through the simultaneous extraction of 18 pesticides of different classes: polar organophosphates, carbamates, neonicotinoids, amides, pyrimidines, benzimidazoles and triazoles in industrial and fresh orange juice. The parameters affecting the extraction efficiency were optimized by multivariable designs. Under optimized conditions, analytes were concentrated onto 1.5 cm long microporous membranes placed directly into the sample containing 9mL of juice at pH 7.0, 4 g of ammonium sulfate and 400 μL of toluene:ethyl acetate (85:15, v/v). The best extraction conditions were achieved at 25°C with 35 min of extraction time. The analyte desorption was carried out using 50 μL of methanol:acetone (50:50, v/v) for 2 min in an ultrasonic bath. Limits of detection ranging between 0.003-0.33 mgL(-1), 0.003-0.35 mg L(-1) and 0.003-0.15 mgL(-1) were obtained for the carton orange juice, carton light orange juice and fresh orange juice samples, respectively. Good repeatability (lower than 7.6%) was obtained for all three sample types. The method was applied to five different juice samples containing soybean extract, orange pulp, nectar, light juice and fresh orange juice. The results suggest that the proposed method represents a very simple and low-cost alternative microextraction procedure rendering adequate limits of quantification for the determination of these pesticides in juice samples.

Preparation of a new C18 stationary phase containing embedded urea groups for use in high-performance liquid chromatography

A new C18 urea stationary phase was prepared by a single-step modification process through the reaction of ProntoSil spherical silica (3 microm, Bischoff) with the trifunctional alkoxysilane (CH3CH2O)3-Si-(CH2)3-NH-C(O)-NH-(CH2)17-CH3, prepared in our laboratory. The phase was characterized by elemental analysis and solid-state 29Si and 13C nuclear mangnetic resonance spectrometry. Chromatographic evaluations of the new phase in 150 x 3.9 mm HPLC columns involving the separation of different test mixtures, indicate good performance for both polar and basic mixtures and also show promising results for further applications.

Stability of high-performance liquid chromatography columns packed with poly(methyloctylsiloxane) sorbed and radiation-immobilized onto porous silica and zirconized silica.

Reversed-phase packing materials were prepared from HPLC silica and from zirconized HPLC silica support particles having sorbed poly(methyloctylsiloxane) (PMOS) as the stationary phase. Portions of zirconized material were subjected to 80 kGy of ionizing radiation. Columns prepared from these packing materials were subjected to 5000 column volumes each of neutral and alkaline (pH 10) mobile phases, with periodic tests to evaluate chromatographic performance. It was shown that the PMOS stationary phase sorbed onto zirconized silica requires an immobilization treatment (such as gamma irradiation) for long term stability while prior surface zirconization of the silica support surface greatly improves the chromatographic stability of the stationary phase when using alkaline mobile phases.

Radiation immobilization of poly(methyloctylsiloxane) on silica for use in HPLC: a uniform layer model.

Poly(methyloctylsiloxane) (PMOS) was sorbed into the pores of HPLC silica by a solvent evaporation procedure, then irradiated with gamma rays from a cobalt-60 source to absorbed doses in the range from 0 to 200 kGy (1Gy = 1J kg-1). Non-irradiated and irradiated samples were characterized by solvent extraction, specific surface area determination, infrared spectroscopy and reversed-phase column performance. Solvent extraction data reveal that about 40% of the PMOS is not extractable prior to irradiation and this increases to about 75% with radiation doses of 50 kGy or higher. Column performance was improved by the radiation treatment, reaching a maximum efficiency in the dose range of 80-140 kGy while the peak symmetry changed from As = 1.7 to 1.1. The improvement is attributed to the increased mass of polymer immobilized by the radiation treatment and to a more uniform distribution of the immobilized polymer in the silica pore system. A multi-layer stationary-phase model is presented in which the first layer consists of an adsorbed monolayer of PMOS and the second layer is immobilized by gamma radiation.