Isabelle Miras

V. Functions of S‐layers

Although S-layers are being increasingly identified on Bacteria and Archaea, it is enigmatic that in most cases S-layer function continues to elude us. In a few instances, S-layers have been shown to be virulence factors on pathogens (e.g. Campylobacter fetus ssp. fetus and Aeromonas salmonicida), protective against Bdellovibrio, a depository for surface-exposed enzymes (e.g. Bacillus stearothermophilus), shape-determining agents (e.g. Thermoproteus tenax) and nucleation factors for fine-grain mineral development (e.g. Synechococcus GL 24). Yet, for the vast majority of S-layered bacteria, the natural function of these crystalline arrays continues to be evasive. The following review up-dates the functional basis of S-layers and describes such diverse topics as the effect of S-layers on the Gram stain, bacteriophage adsorption in lactobacilli, phagocytosis by human polymorphonuclear leukocytes, the adhesion of a high-molecular-mass amylase, outer membrane porosity, and the secretion of extracellular enzymes of Thermoanaerobacterium. In addition, the functional aspect of calcium on the Caulobacter S-layer is explained.

Identification of a region responsible for binding to the cell wall within the S-layer protein of Clostridium thermocellum.

The protomer forming the S-layer of Clostridium thermocellum was identified as a 140 kDa protein which was non-covalently bound to the cell wall. Cloning and sequencing of the corresponding gene revealed an open reading frame of 3108 nucleotides encoding a polypeptide of 1036 amino acids, termed SlpA. The amino acid composition of SlpA matches the composition of a previously described exocellular glycoprotein. SlpA shared extensive similarity with the S-layer protein of Bacillus sphaericus and with the outer wall protein of Bacillus brevis. In addition, the amino-terminal region of SlpA contained a segment presenting similarities with segments termed SLH (S-layer homologous), which are found in several bacterial exoproteins. A polypeptide of 209 residues comprising this segment was shown to bind to cell walls extracted from C. thermocellum cells.

Cloning of a genetically unstable cytochrome P-450 gene cluster involved in degradation of the pollutant ethyl tert-butyl ether by Rhodococcus ruber.

Rhodococcus ruber (formerly Gordonia terrae) IFP 2001 is one of a few bacterial strains able to degrade ethyl tert-butyl ether (ETBE), which is a major pollutant from gasoline. This strain was found to undergo a spontaneous 14.3-kbp chromosomal deletion, which results in the loss of the ability to degrade ETBE. Sequence analysis of the region corresponding to the deletion revealed the presence of a gene cluster, ethABCD, encoding a ferredoxin reductase, a cytochrome P-450, a ferredoxin, and a 10-kDa protein of unknown function, respectively. The EthB and EthD proteins could be easily detected by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and were induced by ETBE in the wild-type strain. Upstream of ethABCD lies ethR, which codes for a putative positive transcriptional regulator of the AraC/XylS family. Transformation of the ETBE-negative mutant by a plasmid carrying the ethRABCD genes restored the ability to degrade ETBE. Complementation was abolished if the plasmid carried ethRABC only. The eth genes are located in a DNA fragment flanked by two identical direct repeats of 5.6 kbp. The ETBE-negative mutants carry a single copy of this 5.6-kbp repeat, suggesting that the 14.3-kbp chromosomal deletion resulted from a recombination between the two identical sequences. The 5.6-kbp repeat is a class II transposon carrying a TnpA transposase, a truncated form of the recombinase TnpR, and a terminal inverted repeat of 38 bp. The truncated TnpR is encoded by an IS3-interrupted tnpR gene.

Genome-wide regulon and crystal structure of BlaI (Rv1846c) from Mycobacterium tuberculosis

Comparative genomics with Staphylococcus aureus suggested the existence of a regulatory system governing beta‐lactamase (BlaC) production in Mycobacterium tuberculosis. The crystal structure of Rv1846c, a winged helix regulator of previously unknown function, was solved thus revealing strong similarity to the BlaI and MecI repressors of S. aureus, which both respond to beta‐lactam treatment. Using chromatin immunoprecipitation and hybridization to microarrays (ChIP‐on‐chip), the Rv1846c regulon was shown to comprise five separate genomic loci. Two of these mediate responses and resistance to beta‐lactam antibiotics (rv1845c, rv1846c–rv1847; blaC–sigC); two encode membrane proteins of unknown function (rv1456c, rv3921c) while the last codes for ATP synthase (rv1303–atpBEFHAGDC–rv1312). The ChIP‐on‐chip findings were confirmed independently using electrophoretic mobility shift assays, DNAse footprinting and transcript analysis leading to Rv1846c being renamed BlaI. When cells were treated with beta‐lactams, BlaI was released from its operator sites causing derepression of the regulon and upregulation of ATP synthase transcription. The existence of a potential regulatory loop between cell wall integrity and ATP production was previously unknown.

Cloning and expression of plasmid DNA sequences involved in Salmonella serotype Typhimurium virulence

A 22 kb region of the 90kb virulence‐associated plasmid, plP1350, of Typhimurium strain C52 was cloned into the mobilizable vector pSUP202, yielding plasmid plP1352. This recombinant plasmid restored full virulence to plasmidless strain C53 in a mouse model. Transposon Tn5 insertion mutagenesis demonstrated the existence of two DNA sequences in plP1352 designated VirA and VirB, both of which are essential for the expression of virulence. A recombinant plasmid containing only the VirA and VirB regions markedly increased the virulence of the plasmidless strain C53, but did not confer full virulence. These results suggested that a third virulence‐associated region might be present on plP1352. Eleven proteins encoded by the 22 kb insert sequence of pl P1352 were identified in Escherichia coli SE5000 maxicells. The VirA region encoded at least two proteins with apparent molecular weights of 71000 and 28000 and the VirB region encoded two proteins of 43000 and 38000.

Recombinant plant gamma carbonic anhydrase homotrimers bind inorganic carbon

MINT‐7266036: gamma CA2 (uniprotkb:Q9C6B3) and gamma CA2 (uniprotkb:Q9C6B3) physically interact (MI:0914) by molecular sieving (MI:0071)

The Crystal Structure of M. Leprae Ml2640C Defines a Large Family of Putative S-Adenosylmethionine- Dependent Methyltransferases in Mycobacteria.

Mycobacterium leprae protein ML2640c belongs to a large family of conserved hypothetical proteins predominantly found in mycobacteria, some of them predicted as putative S‐adenosylmethionine (AdoMet)‐dependent methyltransferases (MTase). As part of a Structural Genomics initiative on conserved hypothetical proteins in pathogenic mycobacteria, we have determined the structure of ML2640c in two distinct crystal forms. As expected, ML2640c has a typical MTase core domain and binds the methyl donor substrate AdoMet in a manner consistent with other known members of this structural family. The putative acceptor substrate‐binding site of ML2640c is a large internal cavity, mostly lined by aromatic and aliphatic side‐chain residues, suggesting that a lipid‐like molecule might be targeted for catalysis. A flap segment (residues 222–256), which isolates the binding site from the bulk solvent and is highly mobile in the crystal structures, could serve as a gateway to allow substrate entry and product release. The multiple sequence alignment of ML2640c‐like proteins revealed that the central α/β core and the AdoMet‐binding site are very well conserved within the family. However, the amino acid positions defining the binding site for the acceptor substrate display a higher variability, suggestive of distinct acceptor substrate specificities. The ML2640c crystal structures offer the first structural glimpses at this important family of mycobacterial proteins and lend strong support to their functional assignment as AdoMet‐dependent methyltransferases.

Conformational changes upon ligand binding in the essential class II fumarase Rv1098c from Mycobacterium tuberculosis

Rv1098c and Rv1098c bind by X‐ray crystallography (View interaction)

Structure of Mycobacterium tuberculosis Rv2714, a representative of a duplicated gene family in Actinobacteria

The gene Rv2714 from Mycobacterium tuberculosis, which codes for a hypothetical protein of unknown function, is a representative member of a gene family that is largely confined to the order Actinomycetales of Actinobacteria. Sequence analysis indicates the presence of two paralogous genes in most mycobacterial genomes and suggests that gene duplication was an ancient event in bacterial evolution. The crystal structure of Rv2714 has been determined at 2.6 A resolution, revealing a trimer in which the topology of the protomer core is similar to that observed in a functionally diverse set of enzymes, including purine nucleoside phosphorylases, some carboxypeptidases, bacterial peptidyl-tRNA hydrolases and even the plastidic form of an intron splicing factor. However, some structural elements, such as a beta-hairpin insertion involved in protein oligomerization and a C-terminal alpha-helical domain that serves as a lid to the putative substrate-binding (or ligand-binding) site, are only found in Rv2714 bacterial homologues and represent specific signatures of this protein family.

Structural characterization of a novel subfamily of leucine-rich repeat proteins from the human pathogen Leptospira interrogans.

Pathogenic Leptospira spp. are the agents of leptospirosis, an emerging zoonotic disease. Analyses of Leptospira genomes have shown that the pathogenic leptospires (but not the saprophytes) possess a large number of genes encoding proteins containing leucine-rich repeat (LRR) domains. In other pathogenic bacteria, proteins with LRR domains have been shown to be involved in mediating host-cell attachment and invasion, but their functions remain unknown in Leptospira. To gain insight into the potential function of leptospiral LRR proteins, the crystal structures of four LRR proteins that represent a novel subfamily with consecutive stretches of a 23-amino-acid LRR repeat motif have been solved. The four proteins analyzed adopt the characteristic α/β-solenoid horseshoe fold. The exposed residues of the inner concave surfaces of the solenoid, which constitute a putative functional binding site, are not conserved. The various leptospiral LRR proteins could therefore recognize distinct structural motifs of different host proteins and thus serve separate and complementary functions in the physiology of these bacteria.