Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Isamu Taguchi is active.

Publication


Featured researches published by Isamu Taguchi.


Bunseki Kagaku | 1974

An automatic spectrophotometric analyzer and an application to the determination of acid soluble aluminum in steel

Akihiro Ono; Isamu Taguchi; Ryutaro Matsumoto

鉄鋼試料を対象として,吸光光度分析法を自動的に実施する分析装置を開発した.すなわち,鉄鋼試料を溶液化して試料交換器上に置けば,後続の吸光光度分析操作である試料溶液前処理操作,発色用試薬溶液添加操作,発色操作,吸光度測定操作およびから試験値測定操作を自動的かつ連続的に実施する.本装置は鋼試料溶液供給機構,発色用試薬溶液添加機構,発色吸光度測定機構,自動制御機構および記録機構かちなりたつが,最も特徴とするのは発色吸光度測定機構である.本装置により鋼試料中の酸可溶性アルミニウムを,エリオクロムシアニンR吸光光度分析法を原理として定量する方法を確立した。本法によれば1試料6分間で分析でき,結果は手操作分析法による定量結果と一致した.


Bunseki Kagaku | 1974

Automatic method and apparatus for dissolving steel samples

Akihiro Ono; Isamu Taguchi; Ryutaro Matsumoto

鉄鋼化学分析法の自動化の研究の一つとして,酸溶解法を基本とする鋼試料自動溶解方法および装置を開発した.開発した方法と装置によれば,試料交換器に並べた鋼試料切削粉を溶解反応そうに移送すること,一定量の試薬を一定時期に添加すること,溶解反応そうの加熱,反応溶液のかき混ぜ,溶液化された試料の移送,溶解反応そうの洗浄などの操作を自動的に順次くりかえして実施することができ,溶解所要時間は1試料5分間である.また,0.3g以下の多種の鋼試料を溶解する酸としては塩酸(35%)と過酸化水素水(30%)の混合溶液が最も適していた.本法および装置によって鋼試料を溶解し,窒素,ケイ素およびアルミニウムを分析した結果は,手操作で溶解して分析した結果とよく一致した.


Bunseki Kagaku | 1974

Automatic spectrophotometric analysis of phosphorus in steel

Akihiro Ono; Isamu Taguchi; Ryutaro Matsumoto

試料溶液を加熱循環しながら発色反応を行なわせ,から試験および発色吸光度を連続的に測定することを基本原理とする自動吸光光度分析装置を用いて,鋼中リン分析の自動化を検討した.すなわち,モリブデン青吸光光度分析法を基本として,自動分析化のための定量基礎条件を詳細に検討し,自動操作プログラムを定めて鋼中リンの自動分析法を開発した.本法によれば,鉄鋼試料を溶液化して試料交換器上に並べたあとは,順次にすべて自動的に操作される.鋼中の0.0005~0.1%のリンを1試料6分間で分析でき,分析結果は高精度で標準値とよく一致した.また,多量のクロムを含む場合は塩化クロミルとして揮散除去すれば,共存元素の影響はほとんど認められなかった.


Bunseki Kagaku | 1973

An apparatus for automatic measurement of absorbancy

Akihiro Ono; Isamu Taguchi; Ryutaro Matsumoto

An automatic apparatus has been developed for measuring the absorbancies of colored sample solutions in measuring flasks. The apparatus consists of a sample solution changer with twelve suction tubes, aspectrophotometer with flow-through cuvette and an aspirator. The changer is mainly made up of twelve electromagnetic cocks, each of which is fitted with one of the twelve tubes dipped in the colored sample solutions. It is automatically controlled to open the cocks in order, sucking the sample solutions through the flow-through cuvette for absorbancy measurement. The cock is newly applied and works on the basis of pressing a tube between the plunger and the metal rod for closing the flow-pass of the tube.The time required for measuring absorbancies of twelve sample solutions was about 6 min. The analytical results showed a good accuracy and reproducibility.


Journal of The Japan Institute of Metals | 1979

Observation of Precipitates and Metallographic Grain Orientation in Steel by a Non-aqueous Electrolyte-Potentiostatic Etching Method

Fumio Kurosawa; Isamu Taguchi; Ryutaro Matsumoto


Archive | 1973

Method and apparatus for automatically dissolving samples for anaylsis

Ryutaro Matsumoto; Akihiro Ono; Isamu Taguchi


Archive | 1971

METHOD AND APPARATUS FOR SIFTING OUT FINE PARTICLES BY UTILIZING SUPERSONIC VIBRATION

Ohiko Kammori; Isamu Taguchi


Journal of The Japan Institute of Metals | 1980

Observation and Analysis of Sigma Phase in Steels Using the Non-aqueous Electrolyte-Potentiostatic Etching Method

Fumio Kurosawa; Isamu Taguchi; Ryutaro Matsumoto


Archive | 1975

Automatic photometric analyzer

Isamu Taguchi; Akihiro Ono; Ryutaro Matsumoto


Materials Transactions | 1990

Precipitation Behavior of Phosphides in the Centerline Segregation Zone of Continuously Cast Steel Slabs

Fumio Kurosawa; Isamu Taguchi

Collaboration


Dive into the Isamu Taguchi's collaboration.

Top Co-Authors

Avatar

Kimitaka Sato

Tokyo Gakugei University

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

H. Suzuki

National Institute for Materials Science

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge