Ivona R. Radović

Modeling of Volumetric Properties of Organic Mixtures Based on Molecular Interactions

Mixing effects for thousands of compounds and their mixtures used in the process industry are rather difficult to be known, hence knowledge of thermodynamic properties such as densities, as well as excess molar volumes, VE, of organic mixtures at various temperatures is of great importance. Selection of systems for analysis should be based on molecular structure of the individual components, as well as their industrial and ecological significance. Mixing of the compounds with different and complex molecular structure leads to various intermolecular interactions, resulting in non-ideal behaviour of mixtures. Therefore, knowledge of volumetric properties of individual components and their mixtures helps in understanding the complex structure of liquids.

Prediction of excess molar volumes of binary mixtures of organic compounds from refractive indices

The excess molar volumes of 51 binary mixtures containing diverse groups of organic compounds: alcohols (methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol, and heptan-1-ol), (cyclo-) alkanes (hexane, heptane, octane, nonane, decane, undecane, dodecane, and cyclohexane), esters (diethyl carbonate and ethyl chloroacetate), aromatics (o-xylene, m-xylene, p-xylene, and ethylbenzene), ketones (acetone), and ethers (anisole), were predicted from the refractive index data, using three types of equations coupled with several different mixing rules for refractive index calculations: the Lorentz-Lorenz, Dale-Gladstone, Eykman, Arago-Biot, Newton, and the Oster. These systems were chosen since they belong to different classes of organic species forming molecular interactions and intermolecular forces during mixing resulting in positive or negative, smaller or larger deviations from ideal behaviour. The obtained results were analysed in terms of the applied equation and mixing rule, the nature of compounds of the mixtures and the influence of alkyl chain length of the alkane or alcohol molecule.

Effect of water addition on extraction ability of eutectic solvent choline chloride+ 1,2-propanediol for separation of hexane/heptane+ethanol systems

The ability of binary deep eutectic solvent choline chloride+1,2-propanediol (DES1; 1 : 3 mole ratio) and ternary deep eutectic solvent choline chloride+1,2-propanediol+water (DES2; 1 : 3 : 3 mole ratio) for breaking the azeotropes hexane/heptane+ethanol by means of liquid-liquid extraction was evaluated. Liquid-liquid equilibrium experiments were performed at 298.15 K, at atmospheric pressure, and data were correlated by NRTL and UNIQUAC models. Thermodynamic properties (density, viscosity, refractive index and speed of sound) of DES1 and DES2 were determined in temperature range from 288.15 K to 333.15 K and at atmospheric pressure. Extraction ability of the investigated eutectics yielded promising results in comparison with conventional solvents. Besides a high selectivity towards ethanol, an advantage of DES2 is its lower viscosity and higher distribution ratio values, which is an important aspect for a potential industrial application. Another advantage of both investigated eutectics is their easy and high recoverability from the extract layer based on their negligible vapor pressure.

Modeling of pure components high pressures densities using CK-SAFT and PC-SAFT equations

SAFT equations of state have been widely used for the determination of different thermo-physical and phase equilibria properties. In order to use these equations as predictive models it is necessary to calculate the model parameters. In this work CK-SAFT and PC-SAFT equations of state were applied for the correlation of pure compounds densities in the wide ranges of temperature and pressure (288.15–413.15 K and 0.1–60 MPa, respectively). The calculations of densities for n-hexane, n-heptane, n-octane, toluene, dichloromethane and ethanol, under high pressure conditions, were performed with the new sets of parameters determined in this paper by CK-SAFT and PC-SAFT. Very good agreement between experimental and calculated density values was achieved, having absolute average percentage deviations lower than 0.5 %.

Effects of solid poly (ethylene glycols) addition to the solutions of aniline or N,N-dimethylaniline with water: Experimental measurements and modelling

In this work, the liquid-liquid and solid-liquid phase behaviour of ten aqueous pseudo-binary and three binary systems containing polyethylene glycol (PEG) 2050, polyethylene glycol 35000, aniline, N,N-dimethylaniline and water, in the temperature range 298.15-350.15 K and at ambient pressure of 0.1 MPa, was studied. The obtained temperature-composition phase diagrams showed that the only functional co-solvent was PEG2050 for aniline in water, while PEG35000 even showed a clear anti-solvent effect in the N,N-dimethylaniline aqueous system. The experimental solid-liquid equilibria (SLE) data have been correlated by the non-random two-liquid (NRTL) model, and the correlation results are in accordance with the experimental results.