J.M. Hernández-López

Doped TiO2 anodic layers of enhanced antibacterial properties

Ti-6Al-4V joint replacement implants foster uncemented fixation in orthopaedic surgery. However, bacterial colonization competes with host cells and ultimately may produce implant-related difficult-to-treat infections, justifying the efforts to obtain infection-resistant materials. In a previous work, the authors demonstrated the antibacterial properties of anodic fluoride-TiO2 nanostructured layers on Ti-6Al-4V alloy. In this work, the anodizing bath has been modified in order to grow fluoride-TiO2 barrier layers (FBL). A bacterial adherence protocol, run with reference and six different clinical strains of Staphylococcus aureus and Staphylococcus epidermidis, showed a statistically significant decrease in the percentage of covered surface (p<0.0001, Kruskal-Wallis test) for FBL specimens when compared with non fluoride-containing specimens, i.e. chemically polished Ti-6Al-4V and F-free TiO2 barrier layers. The results obtained on the F-barrier layers allowed discrimination between the effects of the presence of fluoride in the layer and the layer nanostructure on bacterial adhesion.

Influence of the nanostructure of F-doped TiO2 films on osteoblast growth and function

The aim of this study was to evaluate the proliferation and mineralization ability of mouse osteoblastic MC3T3-E1 cells on F-containing TiO2 films with different morphology and nanostructure that previously confirmed antibacterial properties. F-containing TiO2 films were fabricated by anodizing Ti-6Al-4V alloy ELI -grade 23. By using a mixture of H2SO4/HF acid at 20 V for 5 and 60 min, a TiO2 film grows with nanoporous (NP) and nanotubular (NT) features, characterized with a pore diameter of 20 and 100 nm, respectively. Fluoride-TiO2 barrier films (FBL) were produced in 1M NH4H2PO4/0.15M NH4F solution at constant voltage controlled at 20 V for 120 min. The amount of F incorporated in the nanostructured oxide films was 6 at % and of 4 at %, for the NP and NT, respectively, while for the FBL film was 12 at %. MC3T3-E1 cells exhibited different behavior when seeded and grown onto these surfaces. Thus, F-doped TiO2 films with NP structures increased proliferation as well as osteogenic gene expression and the mineralization capacity of these osteoblastic cells. These results confirm that anodizing process is suitable to fabricate multifunctional surfaces on Ti-6Al-4V alloy with improved not only antibacterial but also osteogenic properties useful for bone fixation of prosthetic devices

Use of anodized titanium alloy as drug carrier: Ibuprofen as model of drug releasing

The use of osteoarticular implants has improved the quality of life of millions of patients. In this work nanotubular structures tailored made on Ti6Al4V substrates was used as drug delivery system of ibuprofen as a proof of concept. Three different nanotubular films with different sizes and forms (NT, NT+ and NTb) were analysed. Samples were soaked in a solution of 660 mg ibuprofen/20 mL n-pentane. The ibuprofen release in aqueous medium was evaluated by liquid chromatography reversed-phase (RP-HPLC). To calculate the observed constant k, the amount of ibuprofen released was plotted versus the time using linear regression according to the zero-order, first-order, second-order and Higuchi model. The release of ibuprofen was constant and independent of the concentration. The kinetic constant obtained was 0.021 (NT), 0.022 (NT+) and 0.013 (NTb) being the correlation factor of 0.98 (zero-order) where the maximum correlation factor was reached. These results indicate that the delivery process from NT and NT+ is similar and slower that NTb. In all the cases was inside the therapeutically range. These results showed the potential of these modifications in order to develop implants that can carry different molecules of medical importance.

TiO2 nanotubes with tunable morphologies

Titanium anodic oxide layers with a bottle shaped nanotubular structure have been grown in an electrolyte containing NH4F, applying voltage steps. The grown layers were analyzed using scanning and transmission electron microscopy (SEM and TEM), and Rutherford backscattering spectroscopy (RBS). The results show that a concentration of 0.15 M of NH4F in the anodizing bath, and a step of 10 to 20 V produces an oxide with a double morphology comprised of nanotubes at the oxide/metal interface and nanopores at the oxide/electrolyte interface of the anodic layer. Higher concentration of F− in the bath, 0.3 and 0.45 M NH4F, enhanced the chemical dissolution of the anodic layer resulting in nanotubular structures along the oxide layer. Therefore, the bottle shaped nanotubular structures that show a well defined morphology are obtained in a bath containing a concentration of 0.3 M NH4F and applying a voltage step of 10–20 V.

Evaluation of bacterial adherence of clinical isolates of Staphylococcus sp. using a competitive model: An in vitro approach to the “race for the surface” theory

Objectives Implant-related infection is one of the most devastating complications in orthopaedic surgery. Many surface and/or material modifications have been developed in order to minimise this problem; however, most of the in vitro studies did not evaluate bacterial adhesion in the presence of eukaryotic cells, as stated by the ‘race for the surface’ theory. Moreover, the adherence of numerous clinical strains with different initial concentrations has not been studied. Methods We describe a method for the study of bacterial adherence in the presence of preosteoblastic cells. For this purpose we mixed different concentrations of bacterial cells from collection and clinical strains of staphylococci isolated from implant-related infections with preosteoblastic cells, and analysed the minimal concentration of bacteria able to colonise the surface of the material with image analysis. Results Our results show that clinical strains adhere to the material surface at lower concentrations than collection strains. A destructive effect of bacteria on preosteoblastic cells was also detected, especially with higher concentrations of bacteria. Conclusions The method described herein can be used to evaluate the effect of surface modifications on bacterial adherence more accurately than conventional monoculture studies. Clinical strains behave differently than collection strains with respect to bacterial adherence. Cite this article: M. Martinez-Perez, C. Perez-Jorge, D. Lozano, S. Portal-Nuñez, R. Perez-Tanoira, A. Conde, M. A. Arenas, J. M. Hernandez-Lopez, J. J. de Damborenea, E. Gomez-Barrena, P. Esbrit, J. Esteban. Evaluation of bacterial adherence of clinical isolates of Staphylococcus sp. using a competitive model: An in vitro approach to the “race for the surface” theory. Bone Joint Res 2017;6:315–322. DOI: 10.1302/2046-3758.65.BJR-2016-0226.R2.