J. M. Sousa Lobo

Influence of dissolution medium agitation on release profiles of sustained-release tablets

Reaching nearly perfect sink conditions is very important in the determination of drug dissolution rates. Many times, the only factor that is taken into consideration in achieving sink conditions is the relation between the drug concentration and its solubility. The analytical conditions of the dissolution assay, as well as the dissolution apparatus, stirring speed, and nature and volume of the dissolution fluid may also influence the dissolution results. The main objective of this work was to study the influence of the stirring rate conditions and of the dissolution apparatus in the diltiazem hydrochloride release from tablets. Diltiazem hydrochloride sustained-release (SR) tablets were tested and the following dissolution parameters were evaluated: t10%, t25%, t50%, dissolution time, mean dissolution time (MDT), and dissolution efficiency (DE) at t120, and at t360. To analyze the release mechanism, several release models were tested, such as Higuchi, zero order, first order, Baker-Lonsdale, Hixson-Crowell, Weibull, and Korsmeyer-Peppas. The similarities between two in vitro dissolution profiles were assessed by the similarity factor f2. The in vitro release kinetics of diltiazem hydrochloride sustained-release tablets were evaluated using the USP 2 (paddle) and USP 4 (flow-through) apparatus.

Bacterial cellulose membranes as drug delivery systems: An in vivo skin compatibility study

Bacterial cellulose (BC) is a highly pure form of cellulose, produced in the form of a swollen membrane by several bacteria that demonstrated to be able to modulate the skin release of model drugs. In the present study, the skin irritation potential of BC was evaluated in human subjects. BC membranes with and without glycerin (acting as plasticizer) were tested. No significant differences were observed for transepidermal water loss (TEWL) measurements in comparison with negative control, 2 and 24 h after patch removal, which is an indicator of an absence of barrier disruption. Similar results were found for erythema. Clinical scores were zero at both times for all volunteers, with the exception of five volunteers that exhibited weak reactions. BC with glycerin provided a skin moisturizing effect statistically higher than the negative control (p=0.044), which was not observed for BC alone. The good skin tolerance found after a single application under occlusion reinforces the putative interest of BC membranes as supports for drug topical delivery. Besides modifying the mechanical properties, the inclusion of glycerin results in a skin moisturizing effect which could be clinically relevant for the treatment for skin diseases characterized by dryness, such as psoriasis and atopic dermatitis.

Effect of hydroxypropyl methylcellulose and hydrogenated castor oil on naproxen release from sustained-release tablets

The effect of the concentration of hydrophilic (hydroxypropyl methylcellulose [HPMC]) and hydrophobic (hydrogenated castor oil [HCO]) products, fillers (lactose and dibasic calcium phosphate), and buffers (sodium bicarbonate, calcium carbonate, and sodium citrate) on naproxen release rate was studied. Matrix tablets were prepared by double compression, andIn vitro dissolution tests were performed. The dissolution results showed that an increased amount of HPMC or hydrogenated castor oil resulted in reduced drug release. The inclusion of buffers in the HPMC matrix tablets enhanced naproxen release. For HCO tablets, only sodium bicarbonate enhanced naproxen release. The presence of lactose on HPMC matrix tablets did not show a significantly different result from that obtained with the formulation containing dibasic calcium phosphate as a filler. However, for the tablets containing HCO, the presence of lactose significantly enhanced the naproxen release rate. The matrix-forming materials in this study were suitable for use in sustained-release tablets containing naproxen. The drug release can be modulated by adding suitable amounts of diluents and buffers.

Evaluation of Mathematical Models Describing Drug Release from Estradiol Transdermal Systems

Abstract The in vitro release profiles of 13 patches of estradiol (from five marketed products) were determined by the paddle-over-disk method. The transdermal systems were membrane-controlled type or matrix diffusion-controlled type. The estradiol content of test aliquots of the dissolution medium was determined by HPLC. To analyze the release mechanism, several release models were tested such as zero order, first order, Higuchi, Weibull, Korsmeyer–Peppas, and Makoid–Banakar. The release profiles showed that the drug was released at a constant rate for three patches. The drug-release rate from the other 10 patches was not constant, and diminished with the square-root of time (Higuchi model).

Photodegradation of avobenzone: Stabilization effect of antioxidants

Avobenzone is one of the most common UVA-filters in sunscreens, and is known to be photounstable. Some of the strategies used to stabilize this filter present some drawbacks like photosensitization reactions. Antioxidants are widely used as cosmetic ingredients that prevent photoageing and complement the photoprotection offered by the UV-filters preventing or reducing photogenerated reactive species. The purpose of this work was to study the effect of antioxidants in the photostabilization of avobenzone. The filter dissolved in dimethyl sulfoxide or incorporated in a sunscreen formulation was irradiated with simulated solar radiation (750 W/m(2)). The tested antioxidants were vitamin C, vitamin E, and ubiquinone. The area under the curve of the absorption spectrum for UVA range and the sun protection factor (SPF) were calculated. Vitamin E (1:2), vitamin C (1:0.5) and ubiquinone (1:0.5) were the more effective concentrations increasing the photostability of avobenzone. In sunscreen formulations, the most effective photostabilizer was ubiquinone which also promoted an increase in SPF. This knowledge is important to improve effectiveness of sunscreen formulation. Antioxidants can be valuable ingredients for sunscreens with a triple activity of filter stabilization, SPF boosting and photoageing prevention.

Design and Evaluation of a Lorazepam Transdermal Delivery System

AbstractThe aim of this work was to study the release and the permeation rate of lorazepam, in order to develop a transdermal therapeutic system (TTS) containing that drug. Only a small number of drugs are by themselves able to permeate the skin at a useful rate in order to achieve a therapeutic effect. The lorazepam permeation rate did not reach that value and required a skin permeation enhancer to increase the skins permeability. Three permeation enhancers (Tween 80, sodium lauryl sulfate, and benzalkonium chloride) were investigated in two different concentrations: 1% and 5% of the amount of lorazepam. The best permeation enhancement results were obtained using benzalkonium chloride in concentration of 5%.

Protective effect of C. sativa leaf extract against UV mediated-DNA damage in a human keratinocyte cell line.

Toxic effects of ultraviolet (UV) radiation on skin include protein and lipid oxidation, and DNA damage. The latter is known to play a major role in photocarcinogenesis and photoaging. Many plant extracts and natural compounds are emerging as photoprotective agents. Castanea sativa leaf extract is able to scavenge several reactive species that have been associated to UV-induced oxidative stress. The aim of this work was to analyze the protective effect of C. sativa extract (ECS) at different concentrations (0.001, 0.01, 0.05 and 0.1 μg/mL) against the UV mediated-DNA damage in a human keratinocyte cell line (HaCaT). For this purpose, the cytokinesis-block micronucleus assay was used. Elucidation of the protective mechanism was undertaken regarding UV absorption, influence on (1)O₂ mediated effects or NRF2 activation. ECS presented a concentration-dependent protective effect against UV-mediated DNA damage in HaCaT cells. The maximum protection afforded (66.4%) was achieved with the concentration of 0.1 μg/mL. This effect was found to be related to a direct antioxidant effect (involving (1)O₂) rather than activation of the endogenous antioxidant response coordinated by NRF2. Electrochemical studies showed that the good antioxidant capacity of the ECS can be ascribed to the presence of a pool of different phenolic antioxidants. No genotoxic or phototoxic effects were observed after incubation of HaCaT cells with ECS (up to 0.1 μg/mL). Taken together these results reinforce the putative application of this plant extract in the prevention/minimization of UV deleterious effects on skin.

Compatibility studies between nebicapone, a novel COMT inhibitor, and excipients using stepwise isothermal high sensitivity DSC method

Study of excipients incompatibility with drugs in an early phase of pharmaceutical development is still a persistent difficulty within the pharmaceutical industry. We examine here the compatibility between an experimental drug (nebicapone) and common excipients using differential scanning calorimetry (DSC), high sensitivity DSC (HSDSC) and a conventional heat stress test. The results obtained indicate that nebicapone may be compatible with lactose monohydrate and sodium croscarmellose but is incompatible with magnesium stearate. This study concludes that HSDSC, in stepwise isothermal mode, may be used as a potential tool for detecting excipient incompatibilities.

Comparison between sensory and instrumental characterization of topical formulations: impact of thickening agents.

Sensorial properties of cutaneous formulations are important in determining their acceptability by consumers. However, sensorial analysis is time‐consuming and requires an available panel of trained assessors. Thus, this article aimed to study the impact of thickening agents on mechanical properties of creams and investigate how these measurements could correlate the sensory attributes using a combined instrumental–sensorial approach.

Characterization, sensorial evaluation and moisturizing efficacy of nanolipidgel formulations.

Nanostructured lipid carriers (NLC) have been widely studied for cosmetic and dermatological applications due to their favourable properties that include the formation of an occlusive film on the skin surface that reduces the transepidermal water loss (TEWL) and increase in water content in the skin which improves the appearance on healthy human skin and reduces symptoms of some skin disorders like eczema.