J.S. Redinha

Structure of isolated 1,4-butanediol: combination of MP2 calculations, NBO analysis, and matrix-isolation infrared spectroscopy.

Theoretical calculations at the MP2 level, NBO and AIM analysis, and matrix-isolation infrared spectroscopy have been used to investigate the structure of the isolated molecule of 1,4-butanediol (1,4-BDO). Sixty-five structures were found to be minima on the potential energy surface, and the three most stable forms are characterized by a folded backbone conformation leading to the formation of an intramolecular H-bond. To better characterize the intramolecular interactions and particularly the hydrogen bonds, natural bond orbital analysis (NBO) was performed for the four most stable conformers, and was further complemented with an atoms-in-molecules (AIM) topological analysis. Infrared spectra of 1,4-BDO isolated in low-temperature argon and xenon matrixes show a good agreement with a population-weighted mean theoretical spectrum, and the spectral features of the conformers expected to be trapped in the matrixes were observed experimentally. Annealing the xenon matrix from 20 to 60 K resulted in significant spectral changes, which were interpreted based on the barriers to intramolecular rotation. An estimation of the intramolecular hydrogen bond energy was carried out following three different methodologies.

Conformational Cooling Dynamics in Matrix-Isolated 1,3-Butanediol

The complete conformational space of monomeric 1,3-butanediol has been characterized theoretically, and 73 unique stable conformers were found at the MP2/6-311++G(d,p) level. These were classified into nine families whose members share the same heavy atom backbone configurations and differ in the hydrogen atom orientations. The first and third most populated backbone families are governed by the formation of an intramolecular hydrogen bond; however, the second precludes this type of interaction and was frequently overlooked in previous studies. Its stability is determined by the relatively high entropy of its main conformers. The hydrogen bonding of four of the most important conformers was characterized by means of atoms in molecules (AIM, also known as QTAIM) and natural bond orbital (NBO) analyses. Using appropriate isodesmic reactions, hydrogen bonding energy stabilizations of 12-14 kJ mol(-1) have been found. Experimentally, monomeric molecules of 1,3-butanediol were isolated in low-temperature inert matrixes, and their infrared spectra were analyzed from the viewpoint of the conformational distribution. All the relevant transition states for the conformational interconversion reaction paths were characterized at the same level of theory to interpret the conformational cooling dynamics observed in the low-temperature matrixes. The energy barriers for rotation of the OH groups were calculated to be very low (<3 kJ mol(-1)). These barriers were overcome in the experiments at 10 K (Ar matrix), in the process of matrix deposition, and population within each family was reduced to the most stable conformers. Further increase in the substrate temperature (up to 40 K, Xe matrix) resulted in conformational cooling where the medium-height barriers (approximately 13 kJ mol(-1)) could be surmounted and all conformational population converted to the ground conformational state. Remarkably, this state turned to consist of two forms of the most stable hydrogen bonded family, which were predicted by calculations to be accidentally degenerated and were found in the annealed matrix in equal amounts. All of these experimentally observed conformational cooling processes were analyzed and supported by full agreement with the theoretical calculations.

Erythritol: Crystal growth from the melt

The structural changes occurring on erythritol as it is cooled from the melt to low temperature, and then heated up to the melting point have been investigated by differential scanning calorimetry (DSC), polarized light thermal microscopy (PLTM), X-ray powder diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR). By DSC, it was possible to set up the conditions to obtain an amorphous solid, a crystalline solid, or a mixture of both materials in different proportions. Two crystalline forms have been identified: a stable and a metastable one with melting points of 117 and 104 degrees C, respectively. The fusion curve decomposition of the stable form revealed the existence of three conformational structures. The main paths of the crystallization from the melt were followed by PLTM. The texture and colour changes allowed the characterization of the different phases and transitions in which they are involved on cooling as well as on heating processes. The type of crystallization front and its velocity were also followed by microscopic observation. These observations, together with the data provided by PXRD, allowed elucidating the transition of the metastable form into the stable one. The structural changes occurring upon the cooling and subsequent heating processes, namely those arising from intermolecular hydrogen bonds, were also accompanied by infrared spectroscopy. Particular attention was given to the spectral changes occurring in the OH stretching region.

Stepwise conformational cooling towards a single isomeric state in the four internal rotors system 1,2-butanediol.

The present work explores the possibilities of the matrix isolation technique in the structural characterisation of highly flexible molecules. To date, most studies of this type were carried out on molecules with three or less internal degrees of freedom and a few (less than 10) possible conformations. The molecule of 1,2-butanediol has four conformationally relevant three-fold rotational axes, which can result in 81 possible conformations. A detailed theoretical study, at the MP2 and DFT(B3LYP) levels of theory with the 6-311 + + G(d,p) basis set, revealed that more than 20 conformers of 1,2-butanediol have relative energies in a 0-10 kJ mol(-1) range and contribute appreciably to the gas phase equilibrium at room temperature. This fact renders conformational studies of the system extremely difficult under normal conditions. However, the method of matrix isolation permits the reduction of the number of populated conformational states in the experiment at low temperature due to the effect known as conformational cooling: low energy barriers promote the relaxation of the higher energy local minima into more stable structures. As a result of massive conformational cooling occurring upon matrix deposition, only five conformers of 1,2-butanediol were retained in the samples at 10 K. These conformers were identified using a combination of FTIR spectroscopy and extensive theoretical calculations of vibrational spectra. Annealing of the matrices up to 50 K resulted in the extreme case of conformational cooling related with the depopulation of all conformers into the most stable unique structure. The observed transformations were rationalized in terms of barriers to intramolecular rotation.

Charge-Assisted Intramolecular Hydrogen Bonds in Disubstituted Cyclohexane Derivatives

In this paper, the N(+)-H···N, N(+)-H···O, and O-H···O(-) charge-assisted intramolecular hydrogen bonds (CAHBs) are investigated using different theoretical approaches. Monocharged cyclohexyldiamines (CHDA), aminocyclohexanols (ACHO), and cyclohexanediols (CHDO) are used as model compounds. Geometry optimizations at the MP2/aug-cc-pVDZ level are used to find the equilibrium structures for all possible H-bonded conformers. CAHBs are characterized geometrically and spectroscopically, and their energy is evaluated by means of homodesmic reactions. By comparison with the neutral forms, the presence of the charge is found to have a deep influence on the geometric and energetic H-bond parameters. In addition, these parameters are strongly dependent on the type of the groups involved as well as on their relative position in the cyclohexyl ring. For the systems under study, the H-bond energies vary from -23 to -113 kJ mol(-1), being classified from moderate to strong H-bonds. These H-bonds are also characterized by the application of the NBO and AIM theories. NBO analysis reveals that the energy corresponding to the charge transfer between the lone-pairs of the electron donor group and the antibonding orbitals of the acceptor group represents an important contribution in the H-bond stabilization. From the application of the AIM theory it is possible to see that these H-bonds possess some covalence which varies according to the type and relative position of the intervenient groups.

Solvation of alkane and alcohol molecules. Energy contributions

In this work we conduct a systematic ab initio study of the solvation of small alkane, monoalcohol and diol molecules, in polar solvents with different properties. A choice of basis set suitable for the type of compounds under study is presented. The various components of the solvent–solute interaction and the cavitation energy are treated individually and their variation with chain length and introduction of hydroxy groups assessed. The use of solute molecules in which controlled changes are imposed allows for an estimation of the relative contributions, thus eliminating accidental error cancellation.

Determination of sulfide by square-wave polarography

Abstract The application of square-wave polarography (SWP) to the determination of sulfide in water is reported. In comparison with other pulse techniques, cathodic stripping SWP was found to be the most sensitive. The details of the deposition and reduction of HgS were explored. The mechanisms of such deposition and reduction were found to be strongly dependent on the sulfide concentration but, in the observed analytical range, the HgS reduction process occurs close to the reversible potential. The influence of pH on the peak potential and on the peak current was studied; the results obtained are compared with those expected for a reversible process. The optimized analytical procedure allows the determination of sulfide in the 20–830 nM analytical range with a rate of 15 samples per h (calibration curve) or 10 samples per h (standard addition method). Thiosulfate and sulfite, but not sulfate, were found to interfere.

Study of Polymorphism From DSC Melting Curves; Polymorphs of Terfenadine

Terfenadine samples prepared by crystallization in different media and supersaturation conditions were used to investigate the polymorphism of the substance. The study was based on DSC melting curves. An empirical parametric equation was used for modelling the experimental data. The signal recorded was resolved into the corresponding overlapping peak components by fitting analysis. Four polymorphic phases were identified.

Phase transitions of 1,2-cyclohexanediol isomers studied by polarised light microscopy and differential thermal analysis

Polarised light microscopy and DTA have been used to study the phase transitions observed in cis and trans-1,2-cyclohexanediol during heating/cooling cycles performed between ambient and melting temperatures to prove that the presence of impurities even in trace amounts can affect the thermal properties of the substances. Good quality commercial material before and after further purification were used in this study.

A calorimetric study of phase transitions for some cyclohexanediols

Phase transitions in solid cis-1,2-cyclohexanediol and trans-1,2-cyclohexanediol and cis/trans-1,4-cyclohexanediol have been studied by differential scanning calorimetry over the temperature range 241 to 383 K. Besides a low-temperature crystalline form, DSC curves show the existence of a solid rotator phase in cis-1,2-cyclohexanediol whilst for the others, only one solid phase is present. Enthalpies of sublimation and vaporization were determined by evaporation into a vacuum using an isothermal calorimeter.