Jabar A. Faraj

A model-dependent approach to correlate accelerated with real-time release from biodegradable microspheres

The purpose of this study was to determine the feasibility of applying accelerated in vitro release testing to correlate or predict long-term in vitro release of leuprolide poly(lactideco-glycolide) microspheres. Peptide release was studied using a dialysis technique at 37°C and at elevated temperatures (50°C–60°C) in 0.1 M phosphate buffered saline (PBS) pH 7.4 and 0.1 M acetate buffer pH 4.0. The data were analyzed using a modification, of the Weibull equation. Peptide release was temperature dependent and complete within 30 days at 37°C and 3 to 5 days at the elevated temperatures. In vitro release profiles at the elevated temperatures correlated well with release at 37°C. The shapes of the release profiles at all temperatures were similar. Using the modified Weibull equation, an increase in temperature was characterized by an increase in the model parameter, α, a scaling factor for the apparent rate constant. Complete release at 37°C was shortened from ∼30 days to 5 days at 50°C, 3.5 days at 55°C, 2.25 days at 60°C in PBS pH 7.4, and 3 days at 50°C in acetate buffer pH 4.0. Values for the model parameter β indicated that the shape of the release profiles at 55°C in PBS pH 7.4 (2.740) and 50°C in 0.1 M acetate buffer pH 4.0 (2.711) were similar to that at 37°C (2.577). The Ea for hydration and erosion were determined to be 42.3 and 19.4 kcal/mol, respectively. Polymer degradation was also temperature dependent and had an Ea of 31.6 kcal/mol. Short-term in vitro release studies offer the possibility of correlation with long-term release, thereby reducing the time and expense associated with longterm studies. Accelerated release methodology could be useful in the prediction of long-term release from extended release microsphere dosage forms and may serve as a quality control tool for the release of clinical or commercial batches.

Hydrolysis of leucine enkephalin in the nasal cavity of the rat — A possible factor in the low bioavailability of nasally administered peptides

In order to investigate the utility of intranasal administration of peptides for systemic medication, the nasal absorption of the model peptide, leucine enkephalin (Tyr-Gly-Gly-Phe-Leu), was studied in the rat. At a concentration of 60 micrograms/ml in Ringers buffer the pentapeptide was found to undergo, extensive hydrolysis in the nasal cavity. The hydrolysis rather than the polarity of the pentapeptide appears responsible for limiting the nasal absorption of this model compound. In the presence of dipeptides, the hydrolysis of leucine enkephalin was significantly inhibited. These results suggest that the nasal administration of peptides may become an important route for drug administration provided that the peptidases in the nasal mucosa can be transiently inhibited via coadministration of pharmacologically inactive peptidase substrates.

Development of a peptide-containing chewing gum as a sustained release antiplaque antimicrobial delivery system.

The objective of this study was to characterize the stability of KSL-W, an antimicrobial decapeptide shown to inhibit the growth of oral bacterial strains associated with caries development and plaque formation, and its potential as an antiplaque agent in a chewing gum formulation. KSL-W formulations with or without the commercial antibacterial agent cetylpyridinium chloride (CPC) were prepared. The release of KSL-W from the gums was assessed in vitro using a chewing gum apparatus and in vivo by a chew-out method. A reverse-phase high-performance liquid chromatography method was developed for assaying KSL-W. Raw material stability and temperature and pH effects on the stability of KSL-W solutions and interactions of KSL-W with tooth-like material, hydroxyapatite discs, were investigated.KSL-W was most stable in acidic aqueous solutions and underwent rapid hydrolysis in base. It was stable to enzymatic degradation in human saliva for 1 hour but was degraded by pancreatic serine proteases. KSL-W readily adsorbed to hydroxyapatite, suggesting that it will also adsorb to the teeth when delivered to the oral cavity. The inclusion of CPC caused a large increase in the rate and extent of KSL-W released from the gums. The gum formulations displayed promising in vitro/ in vivo release profiles, wherein as much as 90% of the KSL-W was released in a sustained manner within 30 minutes in vivo. These results suggest that KSL-W possesses the stability, adsorption, and release characteristics necessary for local delivery to the oral cavity in a chewing gum formulation, there-by serving as a novel antiplaque agent.

Stability of Antimicrobial Decapeptide (KSL) and Its Analogues for Delivery in the Oral Cavity

PurposeTo investigate the stability of KSL, an antimicrobial decapeptide, and its analogues, in human saliva and simulated gastric fluid for delivery in the oral cavity.Materials and MethodsThe degradation products of KSL in human saliva and simulated gastric fluid were separated by reversed-phase HPLC and their structures were identified by electrospray ionization-mass spectrometry. Analogues of KSL were synthesized by solid-phase synthesis procedure. Their enzymatic stabilities and antimicrobial activities were studied.ResultsKSL was degraded by the peptide bond cleavages at Lys6–Val7 in the human saliva and Phe5–Lys6 in simulated gastric fluids. Three analogues of KSL were synthesized; the Lys6 residue was either methylated (KSL-M), or replaced with Trp (KSL-W), or the d-form of Lys (KSL-D). The KSL analogues were much more stable than the native KSL, with the rank order of stability being KSL-D > KSL-W > KSL-M > KSL in human saliva. However, in simulated gastric fluid, while KSL-D was still stable, KSL-W was significantly degraded. In addition, KSL-D significantly lost the antimicrobial activity, whereas KSL-W completely preserved the activity against several oral bacteria. In a chewing gum formulation, KSL-W showed a more sustained release profile as compared with the native KSL.ConclusionThis study suggests that KSL-W could be used as an antiplaque agent in a chewing gum formulation.

IVIVC from Long Acting Olanzapine Microspheres

In this study, four PLGA microsphere formulations of Olanzapine were characterized on the basis of their in vitro behavior at 37°C, using a dialysis based method, with the goal of obtaining an IVIVC. In vivo profiles were determined by deconvolution (Nelson-Wagner method) and using fractional AUC. The in vitro and in vivo release profiles exhibited the same rank order of drug release. Further, in vivo profiles obtained with both approaches were nearly superimposable, suggesting that fractional AUC could be used as an alternative to the Nelson-Wagner method. A comparison of drug release profiles for the four formulations revealed that the in vitro profile lagged slightly behind in vivo release, but the results were not statistically significant (P < 0.0001). Using the four formulations that exhibited different release rates, a Level A IVIVC was established using the deconvolution and fractional AUC approaches. A nearly 1 : 1 correlation (R 2 > 0.96) between in vitro release and in vivo measurements confirmed the excellent relationship between in vitro drug release and the amount of drug absorbed in vivo. The results of this study suggest that proper selection of an in vitro method will greatly aid in establishing a Level A IVIVC for long acting injectables.

Development of Risperidone PLGA Microspheres

The aim of this study was to design and evaluate biodegradable PLGA microspheres for sustained delivery of Risperidone, with an eventual goal of avoiding combination therapy for the treatment of schizophrenia. Two PLGA copolymers (50 : 50 and 75 : 25) were used to prepare four microsphere formulations of Risperidone. The microspheres were characterized by several in vitro techniques. In vivo studies in male Sprague-Dawley rats at 20 and 40 mg/kg doses revealed that all formulations exhibited an initial burst followed by sustained release of the active moiety. Additionally, formulations prepared with 50 : 50 PLGA had a shorter duration of action and lower cumulative AUC levels than the 75 : 25 PLGA microspheres. A simulation of multiple dosing at weekly or 15-day regimen revealed pulsatile behavior for all formulations with steady state being achieved by the second dose. Overall, the clinical use of Formulations A, B, C, or D will eliminate the need for combination oral therapy and reduce time to achieve steady state, with a smaller washout period upon cessation of therapy. Results of this study prove the suitability of using PLGA copolymers of varying composition and molecular weight to develop sustained release formulations that can tailor in vivo behavior and enhance pharmacological effectiveness of the drug.

Microsphere delivery of Risperidone as an alternative to combination therapy

The purpose of this study was to develop a parenteral delivery system of Risperidone that would provide initial and extended drug release and thereby avoid the need for co-administration of oral tablets. Key formulation parameters utilized to achieve desired therapeutic levels in vivo were particle size and drug loading. Three poly (D,L-lactide-co-glycolide) (PLGA) microsphere formulations (Formulations A, B, and C) that encapsulated Risperidone were prepared by varying particle size (19-49 μm) and drug loading parameters (31-37%) but with a uniform bulk density (0.66-0.69)g/cc and internal porosity, utilizing the solvent extraction/evaporation method. The microspheres were characterized for drug content by HPLC, particle size by laser diffractometry, surface morphology by scanning electron microscopy (SEM), and in vivo drug release. In vivo studies were performed in male Sprague-Dawley rats, and levels of the active moiety (Risperidone and its metabolite, 9-hydroxyrisperidone) were assessed. In vivo release profiles from the three microsphere formulations were dependent on particle size and drug loading. The smaller sized microspheres (Formulation A) exhibited a large initial burst and a shorter duration of action, while the larger particles exhibited a smaller initial burst (Formulations B and C) but released drug for a much longer period in vivo. Extended duration of drug release was ascribed to higher drug content in the microspheres. A biweekly simulation of multiple dosing revealed that Formulation C, the selected formulation, with a high load and large particle size would provide adequate initial and maintenance levels of the active moiety (Risperidone and its metabolite, 9-hydroxyrisperidone). A comparison of biweekly dosing in vivo of Formulation C with the marketed product showed that at steady state, though average concentrations for both preparations were similar, the time taken to achieve steady state was much faster for Formulation C. The delay in attaining steady state with Risperdal Consta® was attributed to the 3 week latency in drug release from the microspheres and was in accordance with previous studies indicating a good corroboration with clinical findings. Calculated cumulative AUC (area under the curve) levels for Formulation C were similar to the Risperdal Consta®, though there were marked differences in AUC levels at the early time points. Comparison of Risperidal Consta® and Formulation C by multiple dosing in vivo experiments revealed that the marketed preparation demonstrated a substantial delay in providing an initial loading dose, continuous circulating levels, and attainment of steady state; all of which were observed rapidly with Formulation C. Findings from the current study strongly suggest that a microsphere dosage form of Risperidone can be formulated with an optimum particle size and drug loading to provide an initial bolus followed by maintenance levels, thereby eliminating combination therapy and improving patient compliance.

A Short Term Quality Control Tool for Biodegradable Microspheres

Accelerated in vitro release testing methodology has been developed as an indicator of product performance to be used as a discriminatory quality control (QC) technique for the release of clinical and commercial batches of biodegradable microspheres. While product performance of biodegradable microspheres can be verified by in vivo and/or in vitro experiments, such evaluation can be particularly challenging because of slow polymer degradation, resulting in extended study times, labor, and expense. Three batches of Leuprolide poly(lactic-co-glycolic acid) (PLGA) microspheres having varying morphology (process variants having different particle size and specific surface area) were manufactured by the solvent extraction/evaporation technique. Tests involving in vitro release, polymer degradation and hydration of the microspheres were performed on the three batches at 55°C. In vitro peptide release at 55°C was analyzed using a previously derived modification of the Weibull function termed the modified Weibull equation (MWE). Experimental observations and data analysis confirm excellent reproducibility studies within and between batches of the microsphere formulations demonstrating the predictability of the accelerated experiments at 55°C. The accelerated test method was also successfully able to distinguish the in vitro product performance between the three batches having varying morphology (process variants), indicating that it is a suitable QC tool to discriminate product or process variants in clinical or commercial batches of microspheres. Additionally, data analysis utilized the MWE to further quantify the differences obtained from the accelerated in vitro product performance test between process variants, thereby enhancing the discriminatory power of the accelerated methodology at 55°C.

Enhanced Degradation of Lactide-co-Glycolide Polymer with Basic Nucleophilic Drugs

The purpose of this study was to examine the degradative effect of weakly basic nucleophilic drugs on a lactide-co-glycolide (PLGA) polymer in a microsphere formulation. Biodegradable PLGA microspheres of two second-generation atypical antipsychotics, Risperidone and Olanzapine, were manufactured using a solvent extraction/evaporation technique. The effect of drug content, buffer pH and temperature on polymer molecular weight and degradation, were examined via a series of experiments and compared against a control (Placebo PLGA microspheres). In comparison to Placebo microspheres, significant polymer molecular weight reduction was observed upon encapsulation of varying levels of either Risperidone or Olanzapine. There was excellent correlation between the extent of molecular weight reduction during manufacture and the amount of encapsulated drug in the microspheres. Subsequent studies on polymer degradation showed: the following (a) the Placebo and Olanzapine microspheres followed pseudo first order kinetics, (b) Risperidone microspheres exhibited biphasic degradation profiles, and (c) polymer degradation was dependent on temperature, not pH. The findings of these studies show that encapsulation of weakly basic nucleophile type drugs into PLGA can accelerate the biodegradation of the PLGA and have major implications on the design of polymeric microsphere drug delivery systems.

Preparation, Characterization, and In Vivo Evaluation of Olanzapine Poly(D,L-lactide-co-glycolide) Microspheres

The aim of this study was to prepare injectable depot formulations of Olanzapine using four poly(D,L-lactide-co-glycolide) (PLGA) polymers of varying molecular weight and copolymer composition, and evaluate in vivo performance in rats. In vivo release profiles from the formulations were governed chiefly by polymer molecular weight and to a lesser extent, copolymer composition. Formulations A and B, manufactured using low molecular weight PLGA and administered at 10 mg/kg dose, released drug within 15 days. Formulation C, prepared from intermediate molecular weight PLGA and administered at 20 mg/kg dose, released drug in 30 days, while Formulation D, manufactured using a high molecular weight polymer and administered at 20 mg/kg dose, released drug in 45 days. A simulation of multiple dosing at 7- and 10-day intervals for Formulations A and B revealed that steady state was achieved within 7–21 days and 10–30 days, respectively. Similarly, simulations at 15-day intervals for Formulations C and D indicated that steady state levels were reached during days 15–45. Overall, steady state levels for 7-, 10-, or 15-day dosing ranged between 45 and 65 ng/mL for all the formulations, implying that Olanzapine PLGA microspheres can be tailored to treat patients with varying clinical needs.