Jacqueline S. Daly

Substrate stiffness and contractile behaviour modulate the functional maturation of osteoblasts on a collagen–GAG scaffold

Anchorage-dependent cells respond to the mechanical and physical properties of biomaterials. One such cue is the mechanical stiffness of a material. We compared the osteogenic potential of collagen-glycosaminoglycan (CG) scaffolds with varying stiffness for up to 6 weeks in culture. The mechanical stiffness of CG scaffolds were varied by cross-linking by physical (dehydrothermal (DHT)) and chemical (1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDAC) and glutaraldehyde (GLUT)) methods. The results showed that all CG substrates allowed cellular attachment, infiltration and osteogenic differentiation. CG scaffolds treated with EDAC and GLUT were mechanically stiffer, retained their original scaffold structure and resisted cellular contraction. Consequently, they facilitated a 2-fold greater cell number, probably due to the pore architecture being maintained, allowing improved diffusion of nutrients. On the other hand, the less stiff substrates cross-linked with DHT allowed increased cell-mediated scaffold contraction, contracting by 70% following 6 weeks (P < 0.01) of culture. This reduction in scaffold area resulted in cells reaching the centre of the scaffold quicker up to 4 weeks; however, at 6 weeks all scaffolds showed similar levels of cellular infiltration, with higher cell numbers found on the stiffer EDAC- and GLUT-treated scaffolds. Analysis of osteogenesis showed that scaffolds cross-linked with DHT expressed higher levels of the late stage bone formation markers osteopontin and osteocalcin (P < 0.01) and increased levels of mineralisation. In conclusion, the more compliant CG scaffolds allowed cell-mediated contraction and supported a greater level of osteogenic maturation of MC3T3 cells, while the stiffer, non-contractible scaffolds resulted in lower levels of cell maturation, but higher cell numbers on the scaffold. Therefore, we found scaffold stiffness had different effects on differentiation and cell number whereby the increased cell-mediated contraction facilitated by the less stiff scaffolds positively modulated osteoblast differentiation while reducing cell numbers.

Review article: the effects of antitumour necrosis factor-α on bone metabolism in inflammatory bowel disease.

Background  Patients with inflammatory bowel disease (IBD) are at increased risk of osteoporosis. A number of studies have emerged in recent years indicating that tumour necrosis factor (TNF) blockade appears to have a beneficial effect on bone mineral density (BMD) in IBD patients.

Review article: Effects of anti-tumour necrosis factor-? on bone metabolism in inflammatory bowel disease.

Background  Patients with inflammatory bowel disease (IBD) are at increased risk of osteoporosis. A number of studies have emerged in recent years indicating that tumour necrosis factor (TNF) blockade appears to have a beneficial effect on bone mineral density (BMD) in IBD patients.

Localised controlled release of simvastatin from porous chitosan-gelatin scaffolds engrafted with simvastatin loaded PLGA-microparticles for bone tissue engineering application.

Localised controlled release of simvastatin from porous freeze-dried chitosan-gelatin (CH-G) scaffolds was investigated by incorporating simvastatin loaded poly-(dl-lactide-co-glycolide) acid (PLGA) microparticles (MSIMs) into the scaffolds. MSIMs at 10% w/w simvastatin loading were prepared using a single emulsion-solvent evaporation method. The MSIM optimal amount to be incorporated into the scaffolds was selected by analysing the effect of embedding increasing amounts of blank PLGA microparticles (BL-MPs) on the scaffold physical properties and on the in vitro cell viability using a clonal human osteoblastic cell line (hFOB). Increasing the BL-MP content from 0% to 33.3% w/w showed a significant decrease in swelling degree (from 1245±56% to 570±35%). Scaffold pore size and distribution changed significantly as a function of BL-MP loading. Compressive modulus of scaffolds increased with increasing BL-MP amount up to 16.6% w/w (23.0±1.0kPa). No significant difference in cell viability was observed with increasing BL-MP loading. Based on these results, a content of 16.6% w/w MSIM particles was incorporated successfully in CH-G scaffolds, showing a controlled localised release of simvastatin able to influence the hFOB cell proliferation and the osteoblastic differentiation after 11 days.

Three hours of perfusion culture prior to 28 days of static culture, enhances osteogenesis by human cells in a collagen GAG scaffold†

In tissue engineering, bioreactors can be used to aid in the in vitro development of new tissue by providing biochemical and physical regulatory signals to cells and encouraging them to undergo differentiation and/or to produce extracellular matrix prior to in vivo implantation. This study examined the effect of short term flow perfusion bioreactor culture, prior to long‐term static culture, on human osteoblast cell distribution and osteogenesis within a collagen glycosaminoglycan (CG) scaffold for bone tissue engineering. Human fetal osteoblasts (hFOB 1.19) were seeded onto CG scaffolds and pre‐cultured for 6 days. Constructs were then placed into the bioreactor and exposed to 3 × 1 h bouts of steady flow (1 mL/min) separated by 7 h of no flow over a 24‐h period. The constructs were then cultured under static osteogenic conditions for up to 28 days. Results show that the bioreactor and static culture control groups displayed similar cell numbers and metabolic activity. Histologically, however, peripheral cell‐encapsulation was observed in the static controls, whereas, improved migration and homogenous cell distribution was seen in the bioreactor groups. Gene expression analysis showed that all osteogenic markers investigated displayed greater levels of expression in the bioreactor groups compared to static controls. While static groups showed increased mineral deposition; mechanical testing revealed that there was no difference in the compressive modulus between bioreactor and static groups. In conclusion, a flow perfusion bioreactor improved construct homogeneity by preventing peripheral encapsulation whilst also providing an enhanced osteogenic phenotype over static controls. Bioeng. 2011; 108:1203–1210.

Influence of Parathyroid Hormone-Loaded PLGA Nanoparticles in Porous Scaffolds for Bone Regeneration

Biodegradable poly(lactide-co-glycolide) (PLGA) nanoparticles, containing human parathyroid hormone (PTH (1–34)), prepared by a modified double emulsion-solvent diffusion-evaporation method, were incorporated in porous freeze-dried chitosan-gelatin (CH-G) scaffolds. The PTH-loaded nanoparticles (NPTH) were characterised in terms of morphology, size, protein loading, release kinetics and in vitro assessment of biological activity of released PTH and cytocompatibility studies against clonal human osteoblast (hFOB) cells. Structural integrity of incorporated and released PTH from nanoparticles was found to be intact by using Tris-tricine SDS-PAGE. In vitro PTH release kinetics from PLGA nanoparticles were characterised by a burst release followed by a slow release phase for 3–4 weeks. The released PTH was biologically active as evidenced by the stimulated release of cyclic AMP from hFOB cells as well as increased mineralisation studies. Both in vitro and cell studies demonstrated that the PTH bioactivity was maintained during the fabrication of PLGA nanoparticles and upon release. Finally, a content of 33.3% w/w NPTHs was incorporated in CH-G scaffolds, showing an intermittent release during the first 10 days and, followed by a controlled release over 28 days of observation time. The increased expression of Alkaline Phosphatase levels on hFOB cells further confirmed the activity of intermittently released PTH from scaffolds.

Evaluation and optimization of IgY Spin Column technology in the depletion of abundant proteins from human serum

Serum depletion strategies are commonly implemented in order to remove abundant proteins, increasing the number of proteins detected in a biomarker study. The IgY spin columns used in this study bind 12 and 14 primate proteins, respectively. 1‐D SDS‐PAGE and 2‐DE revealed a suboptimal performance of the IgY spin columns. However, modification of the manufacturers protocol, subjecting samples to two rounds of depletion, improved the number of proteins resolved by 2‐DE. With alteration of the manufacturer protocol, the Seppro® IgY14 spin column can produce depleted serum with an increased number of spots resolved by 2‐DE compared to untreated serum.