Jae-Chul Oh
Sunchon National University
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Jae-Chul Oh.
International Conference on Grid and Distributed Computing | 2009
Hyun Sim; Jae-Chul Oh; Hyeong-Ok Lee
In this paper, Multiple Reduced Hypercube(MRH), which is a new interconnection network based on a hypercube interconnection network, is suggested. Also, this paper demonstrates that MRH(n) proposed in this study is superior to the previously proposed hypercube interconnection networks and the hypercube transformation interconnection networks in terms of network cost(diameter × degree). In addition, several network properties(connectivity, routing algorithm, diameter, broadcasting) of MRH(n) are analyzed.
The Journal of the Korea institute of electronic communication sciences | 2013
Ji-Hoon Moon; Jae-Chul Oh
요 약SD 슬레이브 IP 개발 시 CMD 및 데이터가 정상적으로 처리되는지 분석하기 위해서 프로토콜 분석기를 이용하고 있다. 본 논문에서는 윈도우 환경에서 Visual C++를 이용하여 SD 프로토콜을 분석할 수 있는 프로토콜 분석기를 개발하였다. SD 프로토콜 분석기는 SD 메모리 데이터를 저장하기 위한 임베디드 리눅스 소프트웨어와 이를 분석하기 위한 MFC 프로그램으로 구성되며, 프로토콜 분석은 SD 메모리 카드에서 호스트로 송수신되는 데이터를 리눅스 소프트웨어에서 수집하여 MFC에서 분석할 수 있도록 설계하였다. 실험 결과 개발된 보드를 이용하여 SD 메모리 카드에 데이터를 읽거나 기록할 때 발생되는 CMD 종류의 확인이 가능 하였으며, 문제가 발생되는 부분에 대한 디버깅이 가능하였다.ABSTRACT
The Journal of the Korea institute of electronic communication sciences | 2013
Sam-Yull Hong; Jae-Chul Oh
Twitter, Facebook, and KakaoStory are the major SNS in Korea. Social knowledge production is being produced by those services from numerous collaboration and co-participation in those SNS. Wikipedia or Naver JishikIN service was regarded as the representative product of collective knowledge production during the wired internet era. However now at the wireless internet era centered with smart phones, various forms of collective knowledge production would be achieved by connecting to SNS in real-time. In this thesis, the survey data of collective knowledge production for users of three SNS have been compared and analyzed. The difference of the collective knowledge production mechanism among Twitter, Facebook and KakaoStory has been studied and compared through three variables: the motivation of collective knowledge production, the preference of collective knowledge production model, and collective knowledge production cultural perception. As a result of the analysis of the discriminant factors for three SNS user groups, it turns out that the diversity-toward usage motivation, personal contribution motivation, and collective knowledge production tendency perception are the most influential variables. This thesis is of significance in that it unites the value of social science such as social capital and collective knowledge production from the viewpoint of computer science and opens the new chapter of collective knowledge production with the real-time SNS of wireless internet from the wired internet.
The Journal of the Korea institute of electronic communication sciences | 2014
Ji-Hoon Moon; Jae-Chul Oh
In the AMP(Asymmetric Multiprocessing) based dual core using core-specific operating system in a single processor system, shared memory method is used to send data between processors in dual core. To used shared memory in different operating systems, there is a problem of needing to solving the issue of message communication and synchronization between the two operations systems. In this paper, separate memory controller was used for data sharing between different processor cores in dual core environment. This controller can designate two slave ports to allow simultaneous access from two processors, and in the case of process data simultaneously by two processors, priority order of slave ports is determined through memory mediator. When sending data from A to B processor, SRAM area was logically separated into 8 pages. It allowed using memory area from multiple processes with the size of 4KByte per page, and control register with the size of 4Byte was used to discern the usability of current page.
The Journal of the Korea institute of electronic communication sciences | 2016
Jong-Yul Joo; Jae-Chul Oh
Today, hot rolled mill plant are currently operating 24 hours a day. The main processes of hot-rolled steel mill are Reheating Furnace, Roughing Mill, Fishing Mill and the Down Coiler. In the process checking over the thickness and width of rolled material, temperature control is an important factor. It is quite often the cause of the work breakdown and find a bad elements for product. After the shipping out the product, when a claim occurs requires an investigation. In each process of the conventional thickness gauge, width, and thermometer. Operation by an independent data acquisition and this monitoring is problematic and straining of the operator. The monitoring process the data of each function and incorporate monitoring results can also check future work. The installation of this system will improve our efficiency and productivity. In the rolling process by developing more efficient operating quality monitoring system, this will be made possible.
The Journal of the Korea institute of electronic communication sciences | 2015
Hyun Sim; Jae-Chul Oh
The valve device is installed in hazardous areas, such as a chemical plant explosion has been sealed with fire protection device to prevent the risk of explosion. In this paper, due to the explosion-proof devices using external power the device can not be used in infrared sensors and Zigbee sensor valve device by measuring the open degree of valve opening and closing of the danger zone to check whether. Valve opening and closing operation log screen time, we propose a low-power operation monitoring system administrators to manage and control the plant. Develop power control relay board apply an improved algorithm to apply the asynchronous LPL power management. The plant monitoring system and explosion-proof valve opening and closing the valve system with the intelligent device designed and implemented and tested it.
The Journal of the Korea institute of electronic communication sciences | 2015
Ji-Hoon Moon; Jae-Chul Oh
In this paper, shared memory feature was developed in multi-core system with different OS for different processor-specific bus, while conducting an experiment on shared memory feature between the two processors based on embedded Linux system. For the purpose of developing shared memory in dual bus structure, memory controller was used, while managing shared memory segment through list data structure. For AMP multi-core test, Linux OS was installed in 2 processor cores. In addition, it verified the creation and use of shared memory by using kernel module implemented to test shared memory.
The Kips Transactions:parta | 2012
Kyu-Su Lee; Cheol-Su Son; Hong-Joon Park; Hyun Sim; Jae-Chul Oh
The higher thinking skills, such as creativity and problem-solving about a given problem, are difficult to assess and diagnose. For an accurate diagnosis of these higher thinking abilities, we need to fully observe learner`s problem-solving process or learner`s individual reports. However, in an online learning or virtual class environments, evaluation of learner`s problem-solving process becomes more difficult to diagnose. The best way to solve this problem is through reporting by tracking learner`s actions when he tries to solve a problem. In this study, we developed a module which can evaluate and diagnose student`s problem-solving ability by tracking actions in MS-Office suite, which is used by students to solve a given problem. This module performs based on the learner`s job history through user tracking. To evaluate the effectiveness of this diagnostic module, we conducted satisfaction survey from students who were preparing the actual MOS exams. As a result, eighty-one (81) of the participants were positive on the effectiveness of the learning system with the use of this module.
International Conference on Grid and Distributed Computing | 2009
Hyun Sim; Jae-Chul Oh; Hyeong-Ok Lee
In MRH(n) interconnection network, which has been recently proposed as a new phase for parallel processing, network cost (degree × diameter) is improved by reducing diameter and edge at the same time, while existing hypercube transformation graphs reduce just one of diameter or edge. This paper suggests an embedding method between Hypercube Network Q n and Multiple Reduced Hypercube Network MRH(n). In addition, this paper demonstrates that Hypercube Q n is embedded in MRH(n) at dilation 3 and expansion 2, and that average dilation is 2 or less.
The Journal of the Korea institute of electronic communication sciences | 2013
Hak-Jun Lee; Hyun Sim; Cheol-Su Son; Jae-Chul Oh