Jairo L. Rodrigues

Evaluation of the use of human hair for biomonitoring the deficiency of essential and exposure to toxic elements

Monitoring the nutritional status of essential elements and assessing exposure of individuals to toxic elements is of great importance for human health. Thus, the appropriate selection and measurement of biomarkers of internal dose is of critical importance. Due to their many advantages, hair samples have been widely used to assess human exposure to different contaminants. However, the validity of this biomarker in evaluating the level of trace elements in the human body is debatable. In the present study, we evaluated the relationship between levels of trace elements in hair and whole blood or plasma in a Brazilian population. Hair, blood and plasma were collected from 280 adult volunteers for metal determination. An ICP-MS was used for sample analysis. Manganese, copper, lead and strontium levels in blood varied from 5.1 to 14.7, from 494.8 to 2383.8, from 5.9 to 330.1 and from 11.6 to 87.3 microg/L, respectively. Corresponding levels in hair varied from 0.05 to 6.71, from 0.02 to 37.59, from 0.02 to 30.63 and from 0.9 to 12.6 microg/g. Trace element levels in plasma varied from 0.07 to 8.62, from 118.2 to 1577.7 and from 2.31 to 34.2 microg/L for Mn, Cu and Sr, respectively. There was a weak correlation (r=0.22, p<0.001) between lead levels in hair and blood. Moreover, copper and strontium levels in blood correlate with those levels in plasma (r=0.64 , p<0.001 for Cu) and (r=0.22, p<0.05 for Sr). However, for Cu, Mn and Sr there was no correlation between levels in hair and blood. Our findings suggest that while the idea of measuring trace elements in hair is attractive, hair is not an appropriate biomarker for evaluating Cu, Mn and Sr deficiency or Pb exposure.

Simultaneous determination of Cd, Cu, Mn, Ni, Pb and Zn in nail samples by inductively coupled plasma mass spectrometry (ICP-MS) after tetramethylammonium hydroxide solubilization at room temperature: Comparison with ETAAS

A simple method is described for the determination of Cd, Cu, Mn, Ni, Pb and Zn in nails by using inductively coupled plasma mass spectrometry (ICP-MS) or electrothermal atomic absorption spectrometry (ETAAS). Prior to analysis, 10-20 mg of nail samples were accurately weighed into (15 mL) conical tubes. Then, 1 mL of 25% (w/v) tetramethylammonium hydroxide (TMAH) solution was added to the samples, incubated at room temperature overnight and then further diluted to 10 mL with 1% (v/v) HNO(3). After that, samples were directly analyzed. Rhodium was used as internal standard for ICP-MS analysis. Method detection limits (3 s, n=20) were 0.1, 3.0, 1.0, 4.5, 1.5, 5.0 ng g(-1) for Cd, Cu, Mn, Ni, Pb and Zn, respectively for ICP-MS, and 24, 26, 30, 143, 130 and 1000 ng g(-1), respectively for ETAAS. The key issue addressed here is the elimination of the acid digestion prior to analysis. Moreover, with the use of the proposed method there is a considerable improvement in the sample throughput comparing to the traditional methods using microwave-assisted acid sample digestion prior to analysis. For validation purposes, six ordinary nail samples were solubilized and then directly analyzed by ICP-MS and ETAAS, with no statistical difference between the two techniques at 95% level on applying the t-test.

Determination of trace elements in biological samples by inductively coupled plasma mass spectrometry with tetramethylammonium hydroxide solubilization at room temperature

A simple method for sample preparation of biological samples for trace elements determination by inductively coupled plasma mass spectrometry (ICP-MS) is described. Prior to analysis, 75 mg of the biological samples were accurately weighed into (15 mL) conical tubes. Then, 1 mL of 50% (v/v) tetramethylammonium hydroxide (TMAH) solution was added to the samples, incubated at room temperature for 12 h and the volume made up to 10 mL with a solution containing 0.5% (v/v) HNO(3), 0.01% (v/v) Triton X-100 and 10 microg L(-1) of Rh. After preparation samples may be stored at -20 degrees C during 3 days until the analysis by ICP-MS. With these conditions, the use of the dynamic reaction cell was only mandatory for chromium determination. Method detection limits were 0.2145, 0.0020, 0.0051, 0.0017, 0.0027, 0.0189, 0.02, 0.5, 0.1, 0.0030, 0.0043, 0.0066, 0.0009, 0.020, 0.0043, 0.1794, 0.1 microg(-1) for Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Pb, Sb, Se, Sr, V and Zn, respectively. Validation data are provided based on the analysis of six certified reference materials (CRMs) purchased from the National Institute of Standards and Technology (NIST) and National Research Council Canada (NRCC). Additional validation was provided by the analysis of brain, kidney, liver and heart samples collected from rats and analyzed by the proposed method and by using microwave digestion.

Methylmercury and inorganic mercury determination in blood by using liquid chromatography with inductively coupled plasma mass spectrometry and a fast sample preparation procedure.

Despite the necessity to differentiate chemical species of mercury in clinical specimens, there are a limited number of methods for this purpose. Then, this paper describes a simple method for the determination of methylmercury and inorganic mercury in blood by using liquid chromatography with inductively coupled mass spectrometry (LC-ICP-MS) and a fast sample preparation procedure. Prior to analysis, blood (250microL) is accurately weighed into 15-mL conical tubes. Then, an extractant solution containing mercaptoethanol, l-cysteine and HCl was added to the samples following sonication for 15min. Quantitative mercury extraction was achieved with the proposed procedure. Separation of mercury species was accomplished in less than 5min on a C18 reverse-phase column with a mobile phase containing 0.05% (v/v) mercaptoethanol, 0.4% (m/v) l-cysteine, 0.06molL(-1) ammonium acetate and 5% (v/v) methanol. The method detection limits were found to be 0.25microgL(-1) and 0.1microgL(-1) for inorganic mercury and methylmercury, respectively. Method accuracy is traceable to Standard Reference Material (SRM) 966 Toxic Metals in Bovine Blood from the National Institute of Standards and Technology (NIST). The proposed method was also applied to the speciation of mercury in blood samples collected from fish-eating communities and from rats exposed to thimerosal. With the proposed method there is a considerable reduction of the time of sample preparation prior to speciation of Hg by LC-ICP-MS. Finally, after the application of the proposed method, we demonstrated an interesting in vivo ethylmercury conversion to inorganic mercury.

A Simple Method Based on ICP-MS for Estimation of Background Levels of Arsenic, Cadmium, Copper, Manganese, Nickel, Lead, and Selenium in Blood of the Brazilian Population

Throughout the world, biomonitoring has become the standard for assessing exposure of individuals to toxic elements as well as for responding to serious environmental public health problems. However, extensive biomonitoring surveys require rapid and simple analytical methods. Thus, a simple and high-throughput method is proposed for the determination of arsenic (As), cadmium (Cd), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), and selenium (Se) in blood samples by using inductively coupled plasma–mass spectrometry (ICP-MS). Prior to analysis, 200 μl of blood samples was mixed with 500 μl of 10% v/v tetramethylammonium hydroxide (TMAH) solution, incubated for 10 min, and subsequently diluted to 10 ml with a solution containing 0.05% w/v ethylenediamine tetraacetic acid (EDTA) + 0.005% v/v Triton X-100. After that, samples were directly analyzed by ICP-MS (ELAN DRC II). Rhodium was selected as an internal standard with matrix-matching calibration. Method detection limits were 0.08, 0.04, 0.5, 0.09, 0.12, 0.04, and 0.1 μg//L for As, Cd, Cu, Mn, Ni, Pb, and Se, respectively. Validation data are provided based on the analysis of blood samples from the trace elements inter-\comparison program operated by the Institut National de Santé Publique du Quebec, Canada. Additional validation was provided by the analysis of human blood samples by the proposed method and by using electrothermal atomic absorption spectrometry (ETAAS). The method was subsequently applied for the estimation of background metal blood values in the Brazilian population. In general, the mean concentrations of As, Cd, Cu, Mn, Ni, Pb, and Se in blood were 1.1, 0.4, 890, 9.6, 2.1, 65.4, and 89.3 μg/L, respectively, and are in agreement with other global populations. Influences of age, gender, smoking habits, alcohol consumption, and geographical variation on the values were also considered. Smoking habits influenced the levels of Cd in blood. The levels of Cu, Mn, and Pb were significantly correlated with gender, whereas Cu and Pb were significantly correlated with age. There were also interesting differences in Mn and Se levels in the population living in the north of Brazil compared to the south.

Mercury speciation in seafood samples by LC-ICP-MS with a rapid ultrasound-assisted extraction procedure: Application to the determination of mercury in Brazilian seafood samples.

This paper describes a simple method for mercury speciation in seafood samples by LC-ICP-MS with a fast sample preparation procedure. Prior to analysis, mercury species were extracted from food samples with a solution containing mercaptoethanol, l-cysteine and HCl and sonication for 15min. Separation of mercury species was accomplished in less than 5min on a C8 reverse phase column with a mobile phase containing 0.05%-v/v mercaptoethanol, 0.4%m/v l-cysteine and 0.06molL(-1) ammonium acetate. The method detection limits were found to be 0.25, 0.20 and 0.1ngg(-1) for inorganic mercury, ethylmercury and methylmercury, respectively. Method accuracy is traceable to Certified Reference Materials (DOLT-3 and DORM-3) from the National Research Council Canada (NRCC). With the proposed method there is a considerable reduction of the time of sample preparation. Finally, the method was applied for the speciation of mercury in seafood samples purchased from the Brazilian market.

Carvedilol protects against cisplatin-induced oxidative stress, redox state unbalance and apoptosis in rat kidney mitochondria.

Cisplatin is a highly effective chemotherapeutic agent which causes severe nephrotoxicity. Studies have suggested that reactive oxygen species, mainly generated in mitochondria, play a central role in cisplatin-induced renal damage. A wide range of antioxidants have been evaluated as possible protective agents against cisplatin-induced nephrotoxicity; however a safe and efficacious compound has not yet been found. The present study is the first to evaluate the protective potential of carvedilol, a beta-blocker with strong antioxidant properties, against the mitochondrial oxidative stress and apoptosis in kidney of rats treated with cisplatin. The following cisplatin-induced toxic effects were prevented by carvedilol: increased plasmatic levels of creatinine and blood urea nitrogen (BUN); lipid peroxidation, oxidation of cardiolipin; oxidation of protein sulfhydryls; depletion of the non-enzymatic antioxidant defense and increased activity of caspase-3. Carvedilol per se did not present any effect on renal mitochondria. It was concluded that carvedilol prevents mitochondrial dysfunction and renal cell death through the protection against the oxidative stress and redox state unbalance induced by cisplatin. The association of carvedilol to cisplatin chemotherapy was suggested as a possible strategy to minimize the nephrotoxicity induced by this antitumor agent.

A fast sample preparation procedure for mercury speciation in hair samples by high-performance liquid chromatography coupled to ICP-MS

A simple method for mercury speciation in hair samples with a fast sample preparation procedure using high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry is proposed. Prior to analysis, 50 mg of hair samples were accurately weighed into 15 mL conical tubes. Then, an extractant solution containing mercaptoethanol, L-cysteine and HCl was added to the samples following sonication for 10 min. Quantitative mercury extraction was achieved with the proposed procedure. Separation of inorganic mercury (Ino-Hg), methylmercury (Met-Hg) and ethylmercury (Et-Hg) was accomplished in less than 8 min on a C18 reverse phase column with a mobile phase containing 0.05% v/v mercaptoethanol, 0.4% m/v L-cysteine, 0.06 mol L−1 ammonium acetate and 5% v/v methanol. The method detection limits were found to be 15 ng g−1, 10 ng g−1 and 38 ng g−1, for inorganic mercury, methylmercury and ethylmercury, respectively. Sample throughput is 4 samples h−1 (duplicate). A considerable improvement in the time of analysis was achieved when compared to other published methods. Method accuracy is traceable to Certified Reference Materials (CRMs) 85 and 86 human hair from the International Atomic Energy Agency (IAEA). Finally, the proposed method was successfully applied to the speciation of mercury in hair samples collected from fish-eating communities of the Brazilian Amazon.

Determination of total and inorganic mercury in whole blood by cold vapor inductively coupled plasma mass spectrometry (CV ICP-MS) with alkaline sample preparation

A simple method with a fast sample preparation procedure for total and inorganic mercury determinations in blood samples is proposed based on flow injection cold vapor inductively coupled plasma mass spectrometry (FI-CV ICP-MS). Aliquots of whole blood (500 µL) are diluted 1 + 1 v/v with 10.0% v/v tetramethylammonium hydroxide (TMAH) solution, incubated for 3 h at room temperature and then further diluted 1 + 4 v/v with 2.0% v/v HCl. The inorganic Hg was released by on-line addition of L-cysteine and then reduced to elemental Hg by SnCl2. On the other hand, total mercury was determined by on-line addition of KMnO4 and then reduced to elemental Hg by NaBH4. Samples were calibrated against matrix-matching. The method detection limit was found to be 0.80 µg L−1 and 0.08 µg L−1 for inorganic and total mercury, respectively. Sample throughput is 20 samples h−1. The method accuracy is traceable to Standard Reference Material (SRM) 966 Toxic Metals in Bovine Blood from the National Institute of Standards and Technology (NIST). For additional validation purposes, human whole blood samples were analyzed by the proposed method and by an established CV AAS method, with no statistical difference between the two techniques at 95% confidence level on applying the t-test.

A fast method for the determination of 16 elements in hair samples by inductively coupled plasma mass spectrometry (ICP-MS) with tetramethylammonium hydroxide solubilization at room temperature

This paper describes a simple and fast method for the determination of Se, Pb, Cd, Mn, Co, Zn, Cu, Pt, U, Tl, As, Mg, Cr, Be, Ag and Ni in hair by using inductively coupled plasma spectrometry (ICP-MS). Prior to analysis, 50–100 mg of hair samples were accurately weighed into (15 mL) conical tubes. Then, 1 mL of 25% m/v tetramethylammonium hydroxide (TMAH) solution was added to the samples, incubated at room temperature overnigh and then further diluted to 10 mL with 1% v/v HNO3. After that, samples were directly analyzed by ICP-MS (ELAN DRC II). Rhodium was used as internal standard. Calibration was performed with standards containing 1.0 mg mL−1 of L-cysteine. The method detection limits were 4.0; 0.8; 0.06; 0.8; 0.02; 3.5; 2.3; 0.005; 0.03; 0.02; 0.4; 0.03; 0.09; 0.07; 0.09; 2.0 ng g−1 for Se, Pb, Cd, Mn, Co, Zn, Cu, Pt, U, Tl, As, Mg, Cr, Be, Ag and Ni, respectively. Method accuracy is traceable to Certified Reference Materials (CRMs) 85 and 86 human hair from the International Atomic Energy Agency (IAEA). Additional validation data are provided based on the analysis of hair samples from the trace elements intercomparison program operated by the Institut National de Sante Publique du Quebec, Canada. With the proposed method at least 500 hair samples can be solubilized and analyzed in 3–4 days.