Jakub Sirc

Monolithic columns based on a poly(styrene-divinylbenzene-methacrylic acid) copolymer for capillary liquid chromatography of small organic molecules.

A very simple and readily performed method is described for the preparation of poly(styrene-divinylbenzene-methacrylic acid) monolithic columns for capillary liquid chromatography. The effect of the methacrylic acid content on the morphological and chromatographic properties has been investigated. Methacrylic acid is shown to be essential for isocratic separations of small organic analytes by capillary liquid chromatography. Column efficiencies of about 28,000 theoretical plates/m have been obtained for all the test compounds. The batch-to-batch and run-to-run repeatability of the retention times is better than 1.5%.

Cyclosporine A-loaded and stem cell-seeded electrospun nanofibers for cell-based therapy and local immunosuppression

Cyclosporine A (CsA), a potent immunosuppressive drug with low water solubility, was dissolved in poly(L-lactic acid) (PLA) solution, and nanofibers were fabricated from this mixture by electrospinning technology. The addition of CsA into the PLA solution and the conditions of the electrospinning process did not influence the structure of the nanofibers nor affect the pharmacological activity of CsA. Study of the CsA release behavior in culture medium showed a release for at least 96 h. After the topical application of CsA-loaded nanofibers on skin allografts in vivo, the release was significantly slower and about 35% of the drug was still retained in the nanofibers on day 8. The addition of CsA-loaded nanofibers into cultures of mouse spleen cells stimulated with Concanavalin A selectively inhibited T cell functions; the activity of stimulated macrophages or the growth of non-T-cell populations was not suppressed in the presence of CsA-loaded nanofibers. The covering of skin allografts with CsA-loaded nanofibers significantly attenuated the local production of the proinflammatory cytokines IL-2, IFN-γ and IL-17. These results suggest that CsA-loaded electrospun nanofibers can serve as effective drug carriers for the local/topical suppression of an inflammatory reaction and simultaneously could be used as scaffolds for cell-based therapy.

Morphological characterization of nanofibers: methods and application in practice

Biomedical applications such as wound dressing for skin regeneration, stem cell transplantation, or drug delivery require special demands on the three-dimensional porous scaffolds. Besides the biocompatibility and mechanical properties, the morphology is the most important attribute of the scaffold. Specific surface area, volume, and size of the pores have considerable effect on cell adhesion, growth, and proliferation. In the case of incorporated biologically active substances, their release is also influenced by the internal structure of nanofibers. Although many scientific papers are focused on the preparation of nanofibers and evaluation of biological tests, the morphological characterization was described just briefly as service methods. The aim of this paper is to summarize the methods applicable for morphological characterization of nanofibers and supplement it by the results of our research. Needleless electrospinning technique was used to prepare nanofibers from polylactide, poly(e-caprolactone), gelatin, and polyamide. Scanning electron microscopy was used to evaluate the fiber diameters and to reveal eventual artifacts in the nanofibrous structure. Nitrogen adsorption/desorption measurements were employed to measure the specific surface areas. Mercury porosimetry was used to determine total porosities and compare pore size distributions of the prepared samples.

Controlled gentamicin release from multi-layered electrospun nanofibrous structures of various thicknesses

Polyvinyl alcohol nanofibers incorporating the wide spectrum antibiotic gentamicin were prepared by Nanospider™ needleless technology. A polyvinyl alcohol layer, serving as a drug reservoir, was covered from both sides by polyurethane layers of various thicknesses. The multilayered structure of the nanofibers was observed using scanning electron microscopy, the porosity was characterized by mercury porosimetry, and nitrogen adsorption/desorption measurements were used to determine specific surface areas. The stability of the gentamicin released from the electrospun layers was proved by high-performance liquid chromatography (HPLC) and inhibition of bacterial growth. Drug release was investigated using in vitro experiments with HPLC/MS quantification, while the antimicrobial efficacy was evaluated on Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa. Both experiments proved that the released gentamicin retained its activity and showed that the retention of the drug in the nanofibers was prolonged with the increasing thickness of the covering layers.

Light absorption properties of the rabbit cornea repeatedly irradiated with UVB rays.

Under normal conditions, the cornea absorbs the majority of UVB (ultraviolet B, 280–320 nm) rays, which is very important for the protection of the inner eye against their damaging effect. Our previous studies have shown that repeated irradiation of the rabbit cornea with UVB rays for 5 days (daily dose of 1.01 J cm−2) caused photokeratitis accompanied by swelling (hydration) of the corneal stroma, thinning of the corneal epithelium and decrease in antioxidants. The purpose of this study was to examine the light absorption properties of such damaged rabbit cornea. Results of both spectrophotometry of the whole corneal buttons and corneal tissue dissolved in sodium hydroxide show that because of above mentioned disturbances, UVB‐irradiated cornea absorbs more light throughout the whole measurable UV–VIS spectral range than the normal cornea. Increased corneal thickness (result of hydration), changes of corneal transparency (the cornea becomes grayish) and some increase in protein content all contribute to the increased light absorption of UVB irradiated corneas. We suggest that the UVB‐irradiated cornea, although damaged and nearly without antioxidants, might actually through its higher UV absorbance protect the inner eye against further damage from UVB rays.

Nanofibers for drug delivery - incorporation and release of model molecules, influence of molecular weight and polymer structure

Summary Nanofibers were prepared from polycaprolactone, polylactide and polyvinyl alcohol using NanospiderTM technology. Polyethylene glycols with molecular weights of 2 000, 6 000, 10 000 and 20 000 g/mol, which can be used to moderate the release profile of incorporated pharmacologically active compounds, served as model molecules. They were terminated by aromatic isocyanate and incorporated into the nanofibers. The release of these molecules into an aqueous environment was investigated. The influences of the molecular length and chemical composition of the nanofibers on the release rate and the amount of released polyethylene glycols were evaluated. Longer molecules released faster, as evidenced by a significantly higher amount of released molecules after 72 hours. However, the influence of the chemical composition of nanofibers was even more distinct – the highest amount of polyethylene glycol molecules released from polyvinyl alcohol nanofibers, the lowest amount from polylactide nanofibers.

Effect of Two Different UVA Doses on the Rabbit Cornea and Lens

The aim of the present paper was to examine the irradiation effect of two doses of UVA rays (365 nm) on the rabbit cornea and lens. Corneas of anesthetized adult albino rabbits were irradiated with UVA rays for 5 days (daily dose 1.01 J cm−2 in one group of rabbits and daily dose 2.02 J cm−2 in the second group of animals). The third day after the last irradiation, the rabbits were killed, and their eyes were employed for spectrophotometrical, biochemical and immunohistochemical investigations. Normal eyes served as controls. Absorption spectra of the whole corneal centers were recorded over the UV–VIS (visible) spectral range. Levels of antioxidant and prooxidant enzymes, nitric oxide synthases and nitric oxide (indirectly measured as nitrate concentration) were investigated in the cornea. Malondialdehyde, a byproduct of lipid peroxidation, was examined in the cornea and lens. The results show that the staining for endothelial nitric oxide synthase was more pronounced in corneas irradiated with the higher UVA dose. Otherwise, UVA rays at either dose did not significantly change corneal light absorption properties and did not cause statistically significant metabolic changes in the cornea or lens. In conclusion, UVA rays at the employed doses did not evoke harmful effects in the cornea or lens.

The Effect of Actinoquinol with Hyaluronic Acid in Eye Drops on the Optical Properties and Oxidative Damage of the Rabbit Cornea Irradiated with UVB Rays

Irradiation of the cornea with UVB rays leads to its oxidative damage, swelling and increased light absorption. We investigated changes in the corneal optics (evaluated by changes of corneal hydration and light absorption) and microscopical disturbances of corneas irradiated with UVB rays as influenced by eye drops containing actinoquinol with hyaluronic acid. Rabbit corneas were irradiated with a daily dose of 0.5 or 1.01 J cm−2 of UVB rays (312 nm) for 4 days. During irradiation, the eye drops were applied on the right eye and buffered saline (or hyaluronic acid) on the left eye. On day 5 the rabbits were sacrificed and the corneas examined spectrophotometrically for light absorption. The corneal thickness (hydration) was measured using a pachymeter. Corneas of some other rabbits were examined immunohistochemically. After buffered saline treatment UVB rays evoked changes in the corneal optics and induced oxidative damage of the corneas. After actinoquinol‐hyaluronic acid application, these changes were diminished. Hyaluronic acid alone was less effective. In conclusion, actinoquinol‐hyaluronic acid eye drops decreased changes in corneal optics and suppressed oxidative damage in the UVB‐irradiated cornea. However, the effective corneal protection by these eye drops was limited to the lower UVB dose.

The Reversibility of UV‐B Induced Alterations in Optical Properties of the Rabbit Cornea Depends on Dose of UV Irradiation

Solar UVB radiation evokes photokeratitis, accompanied by increased corneal hydration and changes in corneal transparency, resulting in increased light absorption. Corneal optical properties are disturbed and visual acuity decreased. The aim of this study was to investigate the reversibility of these UVB‐induced changes. Rabbit corneas were irradiated with UVB doses of 0.5 J cm−2 or 1.01 J cm−2 during 4 days. Some rabbits were sacrificed after the last irradiation and some 2 months later. Corneas were investigated spectrophotometrically for light absorption, and corneal hydration was evaluated by central corneal thickness with an ultrasonic pachymeter. Corneal impression cytologies were examined immunohistochemically for proinflammatory cytokines and malondialdehyde. The increased corneal light absorption, hydration and the staining of immunohistochemical markers found in corneas after irradiation returned to normal values during 2 months in corneas irradiated with the lower UVB dose. In contrast, in corneas irradiated with the higher UVB dose, a moderate but statistically significant increase in corneal light absorption, hydration and positive immunohistochemical stainings remained as residual changes. This was in contrast to normal corneas, where the staining of proinflammatory cytokines as well as malondialdehyde was negative. In conclusion, the reversibility of UVB‐induced disturbances was dependent on UVB dose.

Hydration and transparency of the rabbit cornea irradiated with UVB-doses of 0.25 J/cm(2) and 0.5 J/cm(2) compared with equivalent UVB radiation exposure reaching the human cornea from sunlight.

Purpose: Exposure of the cornea to UV radiation from sunlight evokes intraocular inflammation, photokeratitis. Photokeratitis is caused by UVB radiation. It is accompanied by changes of corneal hydration and light absorption. The aim of this study was to examine the effect of two UVB doses on corneal optics in rabbits and to compare these UVB doses with the equivalent exposure of UVB radiation reaching the human cornea from sunlight. Materials and Methods: Rabbit corneas were irradiated with a daily UVB dose of 0.25 J/cm2 or 0.5 J/cm2 for 4 days. One day after finishing the irradiations the rabbits were sacrificed and corneal light absorption measured using our spectrophotometrical method. Corneal hydration was examined using an ultrasonic Pachymeter every experimental day before the irradiation procedure and the last day before sacrificing the animals. Results: Changes in corneal optics appeared after the repeated exposure of the cornea to a UVB dose of 0.25 J/ cm2 and massively increased after the repeated exposure of the cornea to a UVB dose of 0.5 J/cm2. The first significant changes in corneal hydration appeared after a single exposure of the cornea to a UVB dose of 0.25 J/cm2. Conclusions: Changes in corneal hydration appeared after the exposure of the rabbit cornea to a single UVB dose equivalent to 2.6 hours of solar UVB radiation reaching the human cornea, as measured by UVB sensors embedded in the eyes of mannequin heads facing the sun on a beach at noon in July. Repeated exposure of the rabbit cornea to the same UVB dose evoked profound changes in corneal optics. Although comparison of experimental and outdoor conditions are only approximate, the results in rabbits point to the danger for the human eye from UVB radiation when short stays in sunlight are repeated for several consecutive days without UV protection.