Jalal Ghilane

Conducting Ferrocene Monolayers on Nonconducting Surfaces

The redox activity of a ferrocenyl monolayer grafted on an n-type Si111 substrate was investigated by scanning electrochemical microscopy (SECM) in conditions where the substrate plays the role of an insulator. This approach permits the differentiation between the different possible electron-transfer and mass-transport pathways occurring at the interface. As an exciting result, the thin ferrocenyl monolayer behaves like a purely conducting material, highlighting very fast electron communication between immobilized ferrocenyl headgroups in a 2D-like charge-transport mechanism.

Giant Plasmon Resonance Shift Using Poly(3,4-ethylenedioxythiophene) Electrochemical Switching

Herein, we report the variation of localized surface plasmon resonance (LSPR) of gold nanoparticle (NP) arrays covered by poly(3,4-ethylenedioxythiophene) (PEDOT) as a function of the electronic state of the polymer. Giant shifts and fine-tuning of the LSPR of gold NPs surrounded by PEDOT/sodium docecyl sulfate have been achieved. The color variations of plasmonic/conducting polymer (CP) devices are given not only by changes of the optical properties of the CP upon doping but also by a close synergy of the optical properties of CP and NP. Such systems can considerably extend the field of CP-based electrochromic devices.

Grafting Oligothiophenes on Surfaces by Diazonium Electroreduction: A Step toward Ultrathin Junction with Well-Defined Metal/Oligomer Interface

The functionalization of electrode materials through diazonium electroreduction using a heteroaromatic compound, without phenyl groups, has been investigated for the first time. The electrochemical reduction of 2-aminoterthiophenyldiazonium cation, generated in situ, coats the electrode (glassy carbon (GC), gold or platinum) with an ultrathin organic layer, shown by X-ray photoelectron spectroscopy (XPS) of that deposited on gold to consist of terthiophene or oligothiophene. The coating is electroactive at potential close to that of terthiophene in solution. The electrochemical response of the modified GC electrode in the presence of various reversible redox couples shows that the attached layer acts as a conductive switch. It behaves as a barrier to electron transfer when the standard redox potential is below 0.5 V/SCE; in this case diode-like behavior is observed. However, for more oxidizing redox probes the layer can be considered as transparent and no barrier effect is observed. The layer deposited on a platinum ultramicroelectrode (UME) behaves similarly to that obtained on the large GC electrode. Scanning electrochemical microscopy (SECM) can be performed using this electroswitchable modified platinum UME which can act as a filter toward competitive redox exchange pathways.

Ionic liquid viscosity effects on the functionalization of electrode material through the electroreduction of diazonium.

The electrochemical reduction of 4-nitrophenyl diazonium, NPD, in different ionic liquids presenting different viscosities has been investigated. The electrochemical studies show that the reduction of diazonium leading to the formation of its corresponding radical occurs whatever the viscosity of the grafting media. Following that, the presence of an organic layer attached to the electrode after electrochemical treatment was evidenced by cyclic voltammetry (CV) in acidic media thanks to the presence of nitro groups. Moreover, infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) confirm the presence of a nitrophenyl (NP) layer attached to the electrode material. Next, the examination of the electrochemical data through the measurement of the charge, corresponding to the reduction of the attached nitrophenyl (NP) moieties, shows that the surface concentration of NP, Γ(NP), decreases when the viscosity, η, of the grafting media increases. Additionally, in the case of the more viscous ionic liquid, N-tributyl-N-methylammonium bis(trifluoromethylsulfonyl)imide [Bu(3)MeN] [NTf(2)], a cosolvent has been added leading to fine decrease of the viscosity. The IR and CV investigations of the modified electrodes demonstrate the decrease of the amount of the attached molecules when the viscosity of the grafting media increases. In addition, a correlation between Γ(NP) as function of 1/η was observed. Finally, XPS and AFM experiments lead to an estimate of the thickness of the attached layer. As a result, both methods are in perfect agreement and thicknesses of 4 and 1 nm are measured after grafting in acetonitrile and in pure ionic liquid [Bu(3)MeN] [NTf(2)], respectively. By comparison with classical solvent, the use of viscous ionic liquid for the grafting leads to a decrease in the amount of the attached molecules and conduce to the formation of thinner or less dense layer.

Variations of diffusion coefficients of redox active molecules in room temperature ionic liquids upon electron transfer.

In ionic liquids, the diffusion coefficients of a redox couple vary considerably between the neutral and radical ion forms of the molecule. For a reduction, the inequality of the diffusion coefficients is characterized by the ratio gamma = D(red)/D(ox), where D(red) and D(ox) are the diffusion coefficients of the electrogenerated radical anion and of the corresponding neutral molecule, respectively. In this work, measurements of gamma have been performed by scanning electrochemical microscopy (SECM) in transient feedback mode, in three different room temperature ionic liquids (RTILs) sharing the same anion and with a series of nitro-derivative compounds taken as a test family. The smallest gamma ratios were determined in an imidazolium-based RTIL and with the charge of the radical anion localized on the nitro group. Conversely, gamma tends to unity when the radical anion is fully delocalized or when the nitro group is sterically protected by bulky substituents. The gamma ratios, standard potentials of the redox couple measured in RTILs, and those observed in a classical organic solvent were compared for the investigated family of compounds. The stabilization energies approximately follow the gamma ratios in a given RTIL but change considerably between ionic liquids with the nature of the cation.

Host−Guest Complexation: A Convenient Route for the Electroreduction of Diazonium Salts in Aqueous Media and the Formation of Composite Materials

Electrochemical grafting of a water-insoluble diazonium salt in aqueous media onto an electrode surface was achieved by host-guest complexation. 1-(2-Bisthienyl)-4-aminobenzene (BTAB) was solubilized in a water/beta-cyclodextrin solution (beta-CD). The corresponding diazonium salt was generated in situ then electroreduced. This process leads to the attachment of bithiophene or short oligothiophene groups to the electrode surface. The modified surfaces were analyzed by cyclic voltammetry (CV), scanning electrochemical microscopy (SECM), X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRRAS), and atomic force microscopy (AFM). The electrochemical investigations show that the water-based modified surface is similar to one generated in acetonitrile without beta-CD. Thus, the attached organic layer behaves like an electrochemical switch (above some threshold potential, a soluble external probe is oxidized, but the oxidized form cannot be reduced). The modified surfaces consist of grafted bisthienylbenzene (BTB) and cyclodextrins that can be removed from the surface. This procedure may be considered as a new means of creating a surface made of submicrometric holes in an organic semiconducting layer.

Formation of mixed organic layers by stepwise electrochemical reduction of diazonium compounds.

This work describes the formation of a mixed organic layer covalently attached to a carbon electrode. The strategy adopted is based on two successive electrochemical reductions of diazonium salts. First, bithiophene phenyl (BTB) diazonium salt is reduced using host/guest complexation in a water/cyclodextrin (β-CD) solution. The resulting layer consists of grafted BTB oligomers and cyclodextrin that can be removed from the surface. The electrochemical response of several outer-sphere redox probes on such BTB/CD electrodes is close to that of a diode, thanks to the easily p-dopable oligo(BTB) moieties. When CD is removed from the surface, pinholes are created and this diode like behavior is lost. Following this, nitrophenyl (NP) diazonium is reduced to graft a second component. Electrochemical study shows that upon grafting NP insulating moieties, the diode-like behavior of the layer is restored which demonstrates that NP is grafted predominately in the empty spaces generated by β-CD desorption. As a result, a mixed BTB/NP organic layer covalently attached to a carbon electrode is obtained using a stepwise electrochemical reduction of two diazonium compounds.

Micro/Nano-Structured Polypyrrole Surfaces on Oxidizable Metals as Smart Electroswitchable Coatings

Polypyrrole (PPy) films were electrodeposited from a pyrrole/sodium salicylate solution in water, through two-dimensional (2-D) polystyrene (PS) templates self-assembled on various oxidizable metals, after which the template was removed by dissolution in tetrahydrofuran (THF). The resulting PPy films were analyzed by scanning electron microscopy and atomic force microscopy. Two-dimensional PPy honeycomb structures are obtained on copper or mild steel by using PS spheres of various sizes. The morphology of these structures was controlled electrochemically, as an increase in the polymerization charge does not disturb the PPy honeycomb arrangement, leading instead to the formation of deeper pores accompanied by a change in their diameter. The hydrophobicity of the reduced micro-structured PPy surface is much greater than that of a bulk PPy film generated on the same metal. Reversible electro-switching of the wettability was obtained with marked variation of the apparent contact angle upon PPy oxido-reduction, and an important effect of film micro-structuration upon the wettability range.

Medium Effects on the Nucleation and Growth Mechanisms during the Redox Switching Dynamics of Conducting Polymers: Case of Poly(3,4-ethylenedioxythiophene)

The redox switching dynamics of poly(3,4-ethylenedioxythiophene) (PEDOT) in an acetonitrile solution and a room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EmiTFSI), are investigated by means of potential step experiments. Redox switching can be viewed as a phase transition in which the nucleation and growth processes occur. We have developed a phenomenological model allowing the determination of the kinetic parameters. Two limiting cases are shown as follows: (i) a progressive and (ii) an instantaneous nucleation. In all cases, the growth process is described in terms of a self-exchange electron transfer reaction. We show that the mechanisms depend upon the medium. In acetonitrile, progressive nucleation and growth occur during oxidation (p-doping), whereas nucleation is instantaneous in the reduction of the PEDOT film. On the other hand, instantaneous nucleation and growth mechanisms are observed for both oxidation and reduction in EmiTFSI. The difference in the mechanisms results from the ionic exchange process associated with electron transfer and the initial structure of the film (open or compact). The influence of the applied potential on the dynamics is analyzed for both media.

Surface and Electrochemical Properties of Polymer Brush-Based Redox Poly(Ionic Liquid).

Redox-active poly(ionic liquid) poly(3-(2-methacryloyloxy ethyl)-1-(N-(ferrocenylmethyl) imidazolium bis(trifluoromethylsulfonyl)imide deposited onto electrode surfaces has been prepared using surface-initiated atom transfer radical polymerization SI-ATRP. The process starts by electrochemical immobilization of initiator layer, and then methacrylate monomer carrying ferrocene and imidazolium units is polymerized in ionic liquid media via SI-ATRP process. The surfaces analyses of the polymer exhibit a well-defined polymer brushlike structure and confirm the presence of ferrocene and ionic moieties within the film. Furthermore, the electrochemical investigations of poly(redox-active ionic liquid) in different media demonstrate that the electron transfer is not restricted by the rate of counterion migration into/out of the polymer. The attractive electrochemical performance of these materials is further demonstrated by performing electrochemical measurement, of poly(ferrocene ionic liquid), in solvent-free electrolyte. The facile synthesis of such highly ordered electroactive materials based ionic liquid could be useful for the fabrication of nanostructured electrode suitable for performing electrochemistry in solvent free electrolyte. We also demonstrate possible applications of the poly(FcIL) as electrochemically reversible surface wettability system and as electrochemical sensor for the catalytic activity toward the oxidation of tyrosine.