James A. Covington

CMOS Interfacing for Integrated Gas Sensors: A Review

Modern gas sensor technology is becoming an important part of our lives. It has been applied within the home (monitoring CO levels from boilers), the workplace (e.g., checking levels of toxic gases) to healthcare (monitoring gases in hospitals). However, historically the high price of gas sensors has limited market penetration to niche applications, such as safety in mines or petrochemical plants. The high price may be attributed to several different components: (1) cost of a predominantly manual manufacturing process; (2) need for interface circuitry in the form of discrete components on a PCB; and (3) fireproof packaging, making the cost of gas detection instruments typically many hundreds of dollars. Consequently, there has been a considerable effort over the past 20 years, towards the goal of low-cost (

Design and simulations of SOI CMOS micro-hotplate gas sensors

1-

Ultrasensitive Detection of Dopamine Using a Carbon Nanotube Network Microfluidic Flow Electrode

5) gas sensors, employing modern microelectronics technology to manufacture both the sensing element and the signal conditioning circuitry on a single silicon chip. In this paper, we review the emerging field of CMOS gas sensors and focus upon the integration of two main gas-sensing principles, namely, resistive and electrochemical and associated circuitry by CMOS technology. We believe that the combination of CMOS technology with more recent MEMS processing is now mature enough to deliver the exacting demands required to make low-power, low-cost smart gas sensors in high volume and this should result in a new generation of CMOS gas sensors. These new integrated, mass-produced gas sensors could open up mass markets and affect our everyday lives through application in cars, cell phones, watches, etc.

Review article: next generation diagnostic modalities in gastroenterology – gas phase volatile compound biomarker detection

This paper describes a new generation of integrated solid-state gas-sensors embedded in SOI micro-hotplates. The micro-hotplates lie on a SOI membrane and consist of MOSFET heaters that elevate the operating temperature, through self-heating, of a gas sensitive material. These sensors are fully compatible with SOI CMOS or BiCMOS technologies, offer ultra-low power consumption (under 100 mW), high sensitivity, low noise, low unit cost, reproducibility and reliability through the use of on-chip integration. In addition, the new integrated sensors offer a nearly uniform temperature distribution over the active area at its operating temperatures at up to about 300–350°C. This makes SOI-based gas-sensing devices particularly attractive for use in handheld battery-operated gas monitors. This paper reports on the design of a chemo-resistive gas sensor and proposes for the first time an intelligent SOI membrane microcalorimeter using active micro-FET heaters and temperature sensors. A comprehensive set of numerical and analogue simulations is also presented including complex 2D and 3D electro-thermal numerical analyses.

Development and application of a new electronic nose instrument for the detection of colorectal cancer

The electrochemical measurement of dopamine (DA), in phosphate buffer solution (pH 7.4), with a limit of detection (LOD) of ∼5 pM in 50 μL (∼ 250 attomol) is achieved using a band electrode comprised of a sparse network of pristine single-walled carbon nanotubes (SWNTs), which covers <1% of the insulating substrate. The SWNT electrodes are deployed as amperometric (anodic) detectors in microfluidic cells, produced by microstereolithography, designed specifically for flow injection analysis (FIA). The flow cells, have a channel (duct) geometry, with cell height of 25 μm, and are shown to be hydrodynamically well-defined, with laminar Poiseuille flow. In the arrangement where solution continuously flows over the electrode but the electrode is only exposed to the analyte for short periods of time, the SWNT electrodes do not foul and can be used repeatedly for many months. The LOD for dopamine (DA), reported herein, is significantly lower than previous reports using FIA-electrochemical detection. Furthermore, the SWNT electrodes can be used as grown, i.e., they do not require chemical modification or cleanup. The extremely low background signals of the SWNT electrodes, as a consequence of the sparse surface coverage and the low intrinsic capacitance of the SWNTs, means that no signal processing is required to measure the low currents for DA oxidation at trace levels. DA detection in artificial cerebral fluid is also possible with a LOD of ∼50 pM in 50 μL (∼2.5 fmol).

Detection of Colorectal Cancer (CRC) by Urinary Volatile Organic Compound Analysis

The detection of airborne gas phase biomarkers that emanate from biological samples like urine, breath and faeces may herald a new age of non‐invasive diagnostics. These biomarkers may reflect status in health and disease and can be detected by humans and other animals, to some extent, but far more consistently with instruments. The continued advancement in micro and nanotechnology has produced a range of compact and sophisticated gas analysis sensors and sensor systems, focussed primarily towards environmental and security applications. These instruments are now increasingly adapted for use in clinical testing and with the discovery of new gas volatile compound biomarkers, lead naturally to a new era of non‐invasive diagnostics.

Fabrication of versatile channel flow cells for quantitative electroanalysis using prototyping

Colorectal cancer is a leading cause of cancer death in the USA and Europe with symptoms that mimick other far more common lower gastrointestinal (GI) disorders. This difficulty in separating colorectal cancer from these other diseases has driven researchers to search for an effective, non-invasive screening technique. Current state-of-the-art method of Faecal Immunochemical Testing achieving sensitivity ~90%, unfortunately the take-up in the western world is low due to the low patient acceptability of stool samples. However, a wide range of cancers have been distinguished from each-other and healthy controls by detecting the gas/volatile content emanating patient biological media. Dysbiosis afforded by certain disease states may be expressed in the volatile content of urine - a reflection of the gut bacterias metabolic processes. A new electronic nose instrument was developed at the University of Warwick to measure the gas/volatile content of urine headspace, based on an array of 13 commercial electro-chemical and optical sensors. An experimental setup was arranged for a cohort of 92 urine samples from patients of colorectal cancer (CRC), irritable bowel syndrome (IBS) and controls to be run through the machine. Features were extracted from response data and used in Linear Discriminant Analysis (LDA) plots, including a full 3-disease classification and one focussing on distinguishing CRC from IBS. The latter case was tested by the success of re-classification using an (n-1) K-nearest neighbour algorithm, showing 78% sensitivity and 79% specificity to CRC.

Field-effect mobility temperature modeling of 4H-SiC metal-oxide-semiconductor transistors

Colorectal cancer (CRC) is a leading cause of cancer related death in Europe and the USA. There is no universally accepted effective non-invasive screening test for CRC. Guaiac based faecal occult blood (gFOB) testing has largely been superseded by Faecal Immunochemical testing (FIT), but sensitivity still remains poor. The uptake of population based FOBt testing in the UK is also low at around 50%. The detection of volatile organic compounds (VOCs) signature(s) for many cancer subtypes is receiving increasing interest using a variety of gas phase analytical instruments. One such example is FAIMS (Field Asymmetric Ion Mobility Spectrometer). FAIMS is able to identify Inflammatory Bowel disease (IBD) patients by analysing shifts in VOCs patterns in both urine and faeces. This study extends this concept to determine whether CRC patients can be identified through non-invasive analysis of urine, using FAIMS. 133 patients were recruited; 83 CRC patients and 50 healthy controls. Urine was collected at the time of CRC diagnosis and headspace analysis undertaken using a FAIMS instrument (Owlstone, Lonestar, UK). Data was processed using Fisher Discriminant Analysis (FDA) after feature extraction from the raw data. FAIMS analyses demonstrated that the VOC profiles of CRC patients were tightly clustered and could be distinguished from healthy controls. Sensitivity and specificity for CRC detection with FAIMS were 88% and 60% respectively. This study suggests that VOC signatures emanating from urine can be detected in patients with CRC using ion mobility spectroscopy technology (FAIMS) with potential as a novel screening tool.

A novel tool for noninvasive diagnosis and tracking of patients with inflammatory bowel disease.

Here we demonstrate the use of microstereolithography (MSL), a 3D direct manufacturing technique, as a viable method to produce small-scale microfluidic components for electrochemical flow detection. The flow cell is assembled simply by resting the microfabricated component on the electrode of interest and securing with thread! This configuration allows the use of a wide range of electrode materials. Furthermore, our approach eliminates the need for additional sealing methods, such as adhesives, waxes, and screws, which have previously been deployed. In addition, it removes any issues associated with compression of the cell chamber. MSL allows a reduction of the dimensions of the channel geometry (and the resultant component) and, compared to most previously produced devices, it offers a high degree of flexibility in the design, reduced manufacture time, and high reliability. Importantly, the polymer utilized does not distort so that the cell maintains well-defined geometrical dimensions after assembly. For the studies herein the channel dimensions were 3 mm wide, 3.5 mm long, and 192 or 250 mum high. The channel flow cell dimensions were chosen to ensure that the substrate electrodes experienced laminar flow conditions, even with volume flow rates of up to 64 mL min(-1) (the limit of our pumping system). The steady-state transport-limited current response, for the oxidation of ferrocenylmethyl trimethylammonium hexaflorophosphate (FcTMA(+)), at gold and polycrystalline boron doped diamond (pBDD) band electrodes was in agreement with the Levich equation and/or finite element simulations of mass transport. We believe that this method of creating and using channel flow electrodes offers a wide range of new applications from electroanalysis to electrocatalysis.

Characterization and modeling of n-n Si/SiC heterojunction diodes

Here a physically based channel mobility model has been developed to investigate the temperature dependence of the field-effect mobility of 4H-SiC metal-oxide-semiconductor (MOS) transistors with thermally oxidized gate insulators. This model has been designed so that it accounts for the high density of traps at the MOS interface. This temperature dependence is a key issue for silicon carbide electronics, as its basic material properties make it the foremost semiconductor for high power/high temperature electronic devices in applications such as spacecraft, aircraft, automobile, and energy distribution. Our modeling suggests that the high density of charged acceptor interface traps, encountered in thermally grown gate oxides, modulates the channel mobility due to the Coulomb scattering of free carriers in the inversion layer. When the temperature increases, the field-effect mobility of these devices also increases, due to an increase in inversion charge and a reduction of the trapped charge. Experimental ...